86 research outputs found
Monolithic carbon structures including suspended single nanowires and nanomeshes as a sensor platform
With the development of nanomaterial-based nanodevices, it became inevitable to develop cost-effective and simple nanofabrication technologies enabling the formation of nanomaterial assembly in a controllable manner. Herein, we present suspended monolithic carbon single nanowires and nanomeshes bridging two bulk carbon posts, fabricated in a designed manner using two successive UV exposure steps and a single pyrolysis step. The pyrolysis step is accompanied with a significant volume reduction, resulting in the shrinkage of micro-sized photoresist structures into nanoscale carbon structures. Even with the significant elongation of the suspended carbon nanowire induced by the volume reduction of the bulk carbon posts, the resultant tensional stress along the nanowire is not significant but grows along the wire thickness; this tensional stress gradient and the bent supports of the bridge-like carbon nanowire enhance structural robustness and alleviate the stiction problem that suspended nanostructures frequently experience. The feasibility of the suspended carbon nanostructures as a sensor platform was demonstrated by testing its electrochemical behavior, conductivity-temperature relationship, and hydrogen gas sensing capability.open3
Vacuum/Compression Valving (VCV) Using Parrafin-Wax on a Centrifugal Microfluidic CD Platform
This paper introduces novel vacuum/compression valves (VCVs) utilizing paraffin wax. A VCV is implemented by sealing the venting channel/hole with wax plugs (for normally-closed valve), or to be sealed by wax (for normally-open valve), and is activated by localized heating on the CD surface. We demonstrate that the VCV provides the advantages of avoiding unnecessary heating of the sample/reagents in the diagnostic process, allowing for vacuum sealing of the CD, and clear separation of the paraffin wax from the sample/reagents in the microfluidic process. As a proof of concept, the microfluidic processes of liquid flow switching and liquid metering is demonstrated with the VCV. Results show that the VCV lowers the required spinning frequency to perform the microfluidic processes with high accuracy and ease of control.open5
Event-triggered logical flow control for comprehensive process integration of multi-step assays on centrifugal microfluidic platforms
Content in the UH Research Archive is made available for personal research, educational, and non-commercial purposes only. Unless otherwise stated, all content is protected by copyright, and in the absence of an open license, permissions for further re-use should be sought from the publisher, the author, or other copyright holder.The centrifugal "lab-on-a-disc" concept has proven to have great potential for process integration of bioanalytical assays, in particular where ease-of-use, ruggedness, portability, fast turn-around time and cost efficiency are of paramount importance. Yet, as all liquids residing on the disc are exposed to the same centrifugal field, an inherent challenge of these systems remains the automation of multi-step, multi-liquid sample processing and subsequent detection. In order to orchestrate the underlying bioanalytical protocols, an ample palette of rotationally and externally actuated valving schemes has been developed. While excelling with the level of flow control, externally actuated valves require interaction with peripheral instrumentation, thus compromising the conceptual simplicity of the centrifugal platform. In turn, for rotationally controlled schemes, such as common capillary burst valves, typical manufacturing tolerances tend to limit the number of consecutive laboratory unit operations (LUOs) that can be automated on a single disc. In this paper, a major advancement on recently established dissolvable film (DF) valving is presented; for the very first time, a liquid handling sequence can be controlled in response to completion of preceding liquid transfer event, i.e. completely independent of external stimulus or changes in speed of disc rotation. The basic, event-triggered valve configuration is further adapted to leverage conditional, large-scale process integration. First, we demonstrate a fluidic network on a disc encompassing 10 discrete valving steps including logical relationships such as an AND-conditional as well as serial and parallel flow control. Then we present a disc which is capable of implementing common laboratory unit operations such as metering and selective routing of flows. Finally, as a pilot study, these functions are integrated on a single disc to automate a common, multi-step lab protocol for the extraction of total RNA from mammalian cell homogenate.Peer reviewe
Paper imbibition for timing of multi-step liquid handling protocols on event-triggered centrifugal microfluidic lab-on-a-disc platforms
This document is the Accepted Manuscript version of the following article: David J. Kinahan, Sinéad M. Kearney, Olivier P. Faneuil, Macdara T. Glynn, Nikolay Dimov, and Jens Ducrée, ‘Paper imbibition for timing of multi-step liquid handling protocols on event-triggered centrifugal microfluidic lab-on-a-disc platforms’, RSC Advances, Vol. 5 (3): 1818-1826, 2015, doi: https://doi.org/10.1039/C4RA14887H, published by the Royal Society of Chemistry.Rotational microfluidic platforms have attracted swiftly growing interest over the last decade due to their suitability for integration and automation of sample preparation and detection. Valving is of pivotal importance on these compact "Lab-on-a-Disc" (LoaD) platforms as all liquids are exposed to the same centrifugal field. A number of valving technologies have been developed to coordinate timing of serial and/or parallel multi-step/multi-liquid assay protocols comprising of laboratory unit operations (LUOs) such as the release, metering and mixing of sample and reagents. So far these valving techniques could be broadly categorised into rotationally controlled or externally actuated schemes. Only recently a new, "event-triggered" flow control has been introduced. In this approach, a valve is opened upon arrival of a liquid at a defined destination on the disc; this innovative mechanism for the first time permits the cascading of LUOs independent of the spin rate. In one technology, dissolvable films (DFs) are configured with a pneumatic chamber to offer function akin to an electrical relay. Dissolving one DF, termed the control film (CF), results in the release of liquid at a distal location through a so-called load film (LF). In this paper, a new method for temporal control of actuating DF-based, event-triggered CFs which are serially aligned at defined distances along a paper strip is introduced. Liquids are transported through the paper strip at a given velocity, thus setting well-defined intervals between subsequent LUOs, e.g. incubation steps. As a proof-of-concept, we present a disc with integrated metering and mixing which can perform a prototypical, 4-fold serial dilution; a common function in bioanalytical protocols. Imbibition of the paper strip sequentially opens five valves for serial dilution and mixing. To illustrate an unprecedented level of on-disc automation, this is followed by a branched cascade of 17 event-triggered valves (for a total of 22 liquid handling steps) which completes the serial dilution protocol.Peer reviewedFinal Accepted Versio
Ultramicroelectrode Array Based Sensors: A Promising Analytical Tool for Environmental Monitoring
The particular analytical performance of ultramicroelectrode arrays (UMEAs) has attracted a high interest by the research community and has led to the development of a variety of electroanalytical applications. UMEA-based approaches have demonstrated to be powerful, simple, rapid and cost-effective analytical tools for environmental analysis compared to available conventional electrodes and standardised analytical techniques. An overview of the fabrication processes of UMEAs, their characterization and applications carried out by the Spanish scientific community is presented. A brief explanation of theoretical aspects that highlight their electrochemical behavior is also given. Finally, the applications of this transducer platform in the environmental field are discussed
Scaling issues in chemical and biological sensors
When a system is reduced isomorphically in size (i.e., scaled down with all dimensions of the system decreased uniformly, or isomorphic scale reduction), the changes in length, area, and volume ratios alter the relative influence of various physical effects that determine the overall operation - often in unexpected ways. As objects shrink, the ratio of surface area to volume increases, rendering surface forces more important. More generally, as the size of an object decreases, forces scaling with a lower power of the linear dimension dominate over the ones scaling with a higher power (e.g., surface tension gains over gravity, electrostatics over magnetics, etc.) [see M. J. Madou, Fundamentals of Microfabrication, 2nd ed. (Boca Raton, FL: CRC, 2002)]. In this paper, we are investigating the influence of miniaturization on various aspects of chemical and biological sensors; we review scaling issues faced in sensor construction, the importance of sample size and the effect of sensor size on detection sensitivity in some of the most popular sensing approaches.close505
From MEMS to NEMS with carbon
Our work in carbon-microelectromechanical systems (C-MEMS) suggests that C-MEMS might provide a very interesting material and microfabrication approach to battery miniaturization, active DNA arrays and a wide variety of chemical and biological sensors. In C-MEMS, photoresist is patterned by photolithography and subsequently pyrolyzed at high-temperatures in an oxygen-free environment. We established that it is possible to use C-MEMS to create very high-aspect ratio carbon structures (e.g. posts with an aspect ratio >10), suspended carbon plates and suspended carbon nanowires (C-NEMS). By changing the lithography conditions, soft and hard baking times and temperatures, additives to the resist, pyrolysis time, temperature and environment, C-MEMS permits a wide variety of interesting new MEMS and NEMS applications that employ structures having a wide variety of shapes, resistivities and mechanical properties. We also demonstrate that arrays of high-aspect ratio carbon posts can be charged/discharged with Li and this enables the fabrication of a smart switchable array of batteries.close515
A new approach to gas sensing with nanotechnology
Nanosized gas sensor elements are potentially faster, require lower power, come with a lower limit of detection, operate at lower temperatures, obviate the need for expensive catalysts, are more heat shock resistant and might even come at a lower cost than their macro-counterparts. In the last two decades, there have been important developments in two key areas that might make this promise a reality. First is the development of a variety of very good performing nanostructured metal oxide semiconductors (MOSs), the most commonly used materials for gas sensing; and second are advances in very low power loss miniaturized heater elements. Advanced nano- or micro-nanogas sensors have attracted much attention owing to a variety of possible applications. In this article, we first discuss the mechanism underlying MOS-based gas sensor devices, then we describe the advances that have been made towards MOS nanostructured materials and the progress towards low-power nano-and microheaters. Finally, we attempt to design an ideal nanogas sensor by combining the best nanomaterial strategy with the best heater implementation. In this regard, we end with a discussion of a suspended carbon nanowire-based gas sensor design and the advantages it might offer compared with other more conventional gas sensor devices.close
Centrifuge-based fluidic platforms
In this paper, centrifuge-based microfluidic platforms are reviewed and compared with other popular microfluidic propulsion methods. The underlying physical principles of centrifugal pumping in microfluidic systems are presented and the various centrifuge fluidic functions such as valving, decanting, calibration, mixing, metering, heating, sample splitting, and separation are introduced. Those fluidic functions have been combined with analytical measurement techniques such as optical imaging, absorbance and fluorescence spectroscopy and mass spectrometry to make the centrifugal platform a powerful solution for medical and clinical diagnostics and high-throughput screening (HTS) in drug discovery. Applications of a compact disk (CD)-based centrifuge platform analyzed in this paper include two-point calibration of an optode-based ion sensor, an automated immunoassay platform, multiple parallel screening assays, and cellular-based assays. The use of modified commercial CD drives for high-resolution optical imaging is discussed as well. From a broader perspective, we compare technical barriers involved in applying microfluidics for sensing and diagnostics as opposed to applying such techniques to HTS. The latter poses fewer challenges and explains why HTS products based on a CD fluidic platform are already commercially available, while we might have to wait longer to see commercial CD-based diagnostics.close697
- …