Parametric optimization for terabit perpendicular recording

The design of media for ultrahigh-density perpendicular recording is discussed in depth. Analytical and semianalytical models are developed to determine the constraints upon the media to fulfill requirements of writability and thermal stability, and the effect of intergranular exchange coupling is examined. The role of vector fields during the write process is examined, and it is shown that one-dimensional models of perpendicular recording have significant deficiencies. A micromagnetic model is described and the results of simulations of recording undertaken with the model are presented. The paper demonstrates that there is no physical reason why perpendicular recording should not be possible at or above 1 Tb/in(2)

Position clamping of optically trapped microscopic non-spherical probes

We investigate the degree of control that can be exercised over an optically trapped microscopic non-spherical force probe. By position clamping translational and rotational modes in different ways, we are able to dramatically improve the position resolution of our probe with no reduction in sensitivity. We also demonstrate control over rotational-translational coupling, and exhibit a mechanism whereby the average centre of rotation of the probe can be displaced away from its centre

A compact holographic optical tweezers instrument

Holographic optical tweezers have found many applications including the construction of complex micron-scale 3D structures and the control of tools and probes for position, force, and viscosity measurement. We have developed a compact, stable, holographic optical tweezers instrument which can be easily transported and is compatible with a wide range of microscopy techniques, making it a valuable tool for collaborative research. The instrument measures approximately 30×30×35 cm and is designed around a custom inverted microscope, incorporating a fibre laser operating at 1070 nm. We designed the control software to be easily accessible for the non-specialist, and have further improved its ease of use with a multi-touch iPad interface. A high-speed camera allows multiple trapped objects to be tracked simultaneously. We demonstrate that the compact instrument is stable to 0.5 nm for a 10 s measurement time by plotting the Allan variance of the measured position of a trapped 2 μm silica bead. We also present a range of objects that have been successfully manipulated

An Anglo-Saxon execution cemetery at Walkington Wold, Yorkshire

This paper presents a re-evaluation of a cemetery excavated over 30 years ago at Walkington Wold in east Yorkshire. The cemetery is characterized by careless burial on diverse alignments, and by the fact that most of the skeletons did not have associated crania. The cemetery has been variously described as being the result of an early post-Roman massacre, as providing evidence for a ‘Celtic’ head cult or as an Anglo-Saxon execution cemetery. In order to resolve the matter, radiocarbon dates were acquired and a re-examination of the skeletal remains was undertaken. It was confirmed that the cemetery was an Anglo-Saxon execution cemetery, the only known example from northern England, and the site is set into its wider context in the paper

Constructing 3D crystal templates for photonic band gap materials using holographic optical tweezers

A simple and robust method is presented for the construction of 3-dimensional crystals from silica and polystyrene microspheres. The crystals are suitable for use as templates in the production of three-dimensional photonic band gap (PBG) materials. Manipulation of the microspheres was achieved using a dynamic holographic assembler (DHA) consisting of computer controlled holographic optical tweezers. Attachment of the microspheres was achieved by adjusting their colloidal interactions during assembly. The method is demonstrated by constructing a variety of 3-dimensional crystals using spheres ranging in size from 3 µm down to 800 nm. A major advantage of the technique is that it may be used to build structures that cannot be made using self-assembly. This is illustrated through the construction of crystals in which line defects have been deliberately included, and by building simple cubic structures

Evaluation of an on-site sewage disposal system at the Lake of the Ozarks

An aeration device - conventional soil disposal field system was monitored for one year in the Lake of the Ozarks area to assess its treatment efficiency and effect on the water quality of the immediate area. The aeration unit consistently produced a well oxidized effluent (soluble COD=44 mg/L; N03-N=22 mg/L; P04=6. 3 mg /L; SS=l 4 mg /L). Soi1-water samples taken from the tile line and 2 and 5 m down slope indicate that considerable denitrification was occurring but may be decreasing. Little coliform movement was detected. The practice of excavating tile lines into the bedrock was discouraged due to a lack of treatment occurring.Project # G-1235-06 Agreement # 14-08-0001-G-1235-0

Structure optimization effects on the electronic properties of Bi2_2Sr2_2CaCu2_2O8_8

We present detailed first-principles calculations for the normal state electronic properties of the high T$_C$ superconductor Bi$_2$Sr$_2$CaCu$_2$O$_8$, by means of the linearized augmented plane wave (LAPW) method within the framework of density functional theory (DFT). As a first step, the body centered tetragonal (BCT) cell has been adopted, and optimized regarding its volume, $c/a$ ratio and internal atomic positions by total energy and force minimizations. The full optimization of the BCT cell leads to small but visible changes in the topology of the Fermi surface, rounding the shape of CuO$_2$ barrels, and causing both the BiO bands, responsible for the pockets near the \textit{\=M} 2D symmetry point, to dip below the Fermi level. We have then studied the influence of the distortions in the BiO plane observed in nature by means of a $\sqrt{2}\times\sqrt{2}$ orthorhombic cell (AD-ORTH) with $Bbmb$ space group. Contrary to what has been observed for the Bi-2201 compound, we find that for Bi-2212 the distortion does not sensibly shift the BiO bands which retain their metallic character. As a severe test for the considered structures we present Raman-active phonon frequencies ($q = 0$) and eigenvectors calculated within the frozen-phonon approximation. Focussing on the totally symmetric A$_{g}$ modes, we observe that for a reliable attribution of the peaks observed in Raman experiments, both $c$- and a-axis vibrations must be taken into account, the latter being activated by the in-plane orthorhombic distortion.Comment: 22 pages, 4 figure

Amplitude measurements of Faraday waves

A light reflection technique is used to measure quantitatively the surface elevation of Faraday waves. The performed measurements cover a wide parameter range of driving frequencies and sample viscosities. In the capillary wave regime the bifurcation diagrams exhibit a frequency independent scaling proportional to the wavelength. We also provide numerical simulations of the full Navier-Stokes equations, which are in quantitative agreement up to supercritical drive amplitudes of 20%. The validity of an existing perturbation analysis is found to be limited to 2.5% overcriticaly.Comment: 7 figure

Talented suppliers? Strategic change and innovation in the UK aerospace industry

The 1990s marked the start of extensive re-structuring in the aerospace industry throughout the world. While the ensuing consolidation among prime contractors has been widely researched, the changes affecting the aerospace supply chain have received less attention. This study focuses on the re-structuring taking place within the supply chain of the UK aerospace industry. The findings point to extensive re-structuring. Unlike most earlier studies the lean supply model was found to be a powerful influence, with suppliers moving away from subcontractor status and instead taking on the mantle of ‘talented’ suppliers. While some of the implications of lean supply, in terms of the dynamics of innovation, were not apparent, there were modest signs of increased process innovation on the part of some suppliers

Anthropogenic Space Weather

Anthropogenic effects on the space environment started in the late 19th century and reached their peak in the 1960s when high-altitude nuclear explosions were carried out by the USA and the Soviet Union. These explosions created artificial radiation belts near Earth that resulted in major damages to several satellites. Another, unexpected impact of the high-altitude nuclear tests was the electromagnetic pulse (EMP) that can have devastating effects over a large geographic area (as large as the continental United States). Other anthropogenic impacts on the space environment include chemical release ex- periments, high-frequency wave heating of the ionosphere and the interaction of VLF waves with the radiation belts. This paper reviews the fundamental physical process behind these phenomena and discusses the observations of their impacts.Comment: 71 pages, 35 figure