Spatial resolution of a GEM readout TPC using the charge dispersion signal

A large volume Time Projection Chamber (TPC) is being considered for the central charged particle tracker for the detector for the proposed International Linear Collider (ILC). To meet the ILC-TPC spatial resolution challenge of ~100 microns with a manageable number of readout pads and channels of electronics, Micro Pattern Gas Detectors (MPGD) are being developed which could use pads comparable in width to the proportional-wire/cathode-pad TPC. We have built a prototype GEM readout TPC with 2 mm x 6 mm pads using the new concept of charge dispersion in MPGDs with a resistive anode. The dependence of transverse resolution on the drift distance has been measured for small angle tracks in cosmic ray tests without a magnetic field for Ar/CO2 (90:10). The GEM-TPC resolution with charge dispersion readout is significantly better than previous measurements carried out with conventional direct charge readout techniques.Comment: 5 figures, 10 page

Position Sensing from Charge Dispersion in Micro-Pattern Gas Detectors with a Resistive Anode

Micro-pattern gas detectors, such as the Gas Electron Multiplier (GEM) and the Micromegas need narrow high density anode readout elements to achieve good spatial resolution. A high-density anode readout would require an unmanageable number of electronics channels for certain potential micro-detector applications such as the Time Projection Chamber. We describe below a new technique to achieve good spatial resolution without increasing the electronics channel count in a modified micro-detector outfitted with a high surface resistivity anode readout structure. The concept and preliminary measurements of spatial resolution from charge dispersion in a modified GEM detector with a resistive anode are described below.Comment: 14 pages, 8 figures, submitted to Nucl. Inst. Meth; typo in eqn 4 corrected, fig 2 updated accordingl

Resolution studies of cosmic-ray tracks in a TPC with GEM readout

A large volume TPC is a leading candidate for the central tracking detector at a future high energy linear collider. To improve the resolution a new readout based on micro-pattern gas detectors is being developed. Measurements of the spatial resolution of cosmic-ray tracks in a GEM TPC are presented. We find that the resolution suffers if the readout pads are too wide with respect to the charge distribution at the readout plane due to insufficient charge sharing. For narrow pads of 2 x 6 mm**2 we measure a resolution of 100 micometer at short drift distances in the absence of an axial magnetic field. The dependence of the spatial resolution as a function of drift distance allows the determination of the underlying electron statistics. Our results show that the present technique uses about half the statistical power available from the number of primary electrons. The track angle effect is observed as expected.Comment: 18 pages, 8 figures, version as published in Nucl. Inst. Met

Health care perspectives from burmese refugees

poster abstractBackground: Indianapolis is home to one of the largest Burmese Chin refugee populations outside of Myanmar. Out of the 10,000 Burmese in Indianapolis, over 8,000 are of Chin ethnicity, which is 20% of all Burmese Chin living in the United States. Providers caring for these refugees share concerns that this population may have difficulty accessing care because of language barriers. The goal of this study was to better understand Burmese adult and adolescent views of the U.S. healthcare system Methods: This was a qualitative study that used the phenomenological approach to understand the experience of Burmese refugees. Six focus groups were held from March to May 2013. Discussions were facilitated by MM, in the presence of a trained Burmese interpreter. Any Burmese refugees living in Indianapolis were eligible to participate and were recruited from the Southport Public Library, Burmese-specific ESL courses, and the Burmese community center. Transcripts from focus groups were individually coded by three authors (MM, AD, RH) using NVivo10 (QSR International). Codes with kappa agreements of 96% or more were the foundation for thematic analysis. Findings: Participants were predominantly Chin in ethnicity consisting of 16 adults (all females) and 17 adolescents (10 females, 7 males). Each focus group had between 2-10 participants. Qualitative data analysis identified themes relating to their experience accessing the healthcare system: 1) Time (long wait times at the clinic, pharmacy, and emergency departments) 2) Language barriers (heavy reliance on English-speaking community members, preferences in interpreting services) 3) Relationships with heath care providers (traditional medicines, trust in physicians). Adults often ask adolescents to interpret for them. Adolescents felt comfortable with this responsibility, and some noted frustration when they were not allowed to interpret in clinics or emergency rooms. Concerns with long wait times were common and compounded by difficulties in obtaining an appropriate interpreter. Many of the adult participants preferred an internet-based video interpreting service over in-person interpreters because of increased dialect options, as well as shorter wait times. Although traditional medicines and healing techniques were used in refugee camps and occasionally in Indianapolis, most Burmese place trust with western medicine and report valuing and complying with physician recommendations. Many have a basic understanding of good health practices and the causes of illness. This is seen most consistently in the adolescent groups. Interpretation: Overall, Burmese Chin have adapted to their new home. Although they experience common frustrations with the healthcare system, these frustrations were exacerbated by long waits for an interpreter. Resources, such as a phone or video-based interpreter, are available in most health care facilities and preferred by the Burmese. More research is needed to better understand the challenges of the Burmese population residing in the United States. Funding:AAP Resident CATCH Grant: McHenr

Constraints on the Variation of the Fine Structure Constant from Big Bang Nucleosynthesis

We put bounds on the variation of the value of the fine structure constant $\alpha$, at the time of Big Bang nucleosynthesis. We study carefully all light elements up to $^7$Li. We correct a previous upper limit on $|\Delta \alpha / \alpha|$ estimated from $^4$He primordial abundance and we find interesting new potential limits (depending on the value of the baryon-to-photon ratio) from $^7$Li, whose production is governed to a large extent by Coulomb barriers. The presently unclear observational situation concerning the primordial abundances preclude a better limit than |\Delta \alpha/\alpha| \lsim 2\cdot 10^{-2}, two orders of magnitude less restrictive than previous bounds. In fact, each of the (mutually exclusive) scenarios of standard Big Bang nucleosynthesis proposed, one based on a high value of the measured deuterium primordial abundance and one based on a low value, may describe some aspects of data better if a change in $\alpha$ of this magnitude is assumed.Comment: 21 pages, eps figures embedded using epsfig macr

Groundwater resources in the Indo-Gangetic Basin : resilience to climate change and abstraction

Groundwater within the Indo‐Gangetic Basin (IGB) alluvial aquifer system forms one of the world’s most important and heavily exploited reservoirs of freshwater. In this study we have examined the groundwater system through the lens of its resilience to change – both from the impact of climate change and increases in abstraction. This has led to the development of a series of new maps for the IGB aquifer, building on existing datasets held in Pakistan, India, Nepal and Bangladesh, a review of approximately 500 reports and papers, and three targeted field studies on under‐researched topics within the region. The major findings of the study are described below. The IGB groundwater system 1. The IGB alluvial aquifer system comprises a large volume of heterogeneous unconsolidated sediment in a complex environmental setting. Annual rainfall varies from 2000mm in the Bengal basin, and the system is dissected by the major river systems of the Indus, Ganges and Brahmaputra. The groundwater system has been modified by the introduction of large scale canal irrigation schemes using water from the Indus and Ganges since the 19th and early 20th centuries. 2. High yielding tubewells can be sustained in most parts of the alluvial aquifer system; permeability is often in the range of 10 – 60 m/d and specific yield (the drainable porosity) varies from 5 – 20%, making it highly productive. 3. High salinity and elevated arsenic concentrations exist in parts of the basin limiting the usefulness of the groundwater resource. Saline water predominates in the Lower Indus, and near to the coast in the Bengal Delta, and is also a major concern in the Middle Ganges and Upper Ganges (covering much of the Punjab Region in Pakistan, southern Punjab, Haryana and parts of Uttar Pradesh in India). Arsenic severely impacts the development of shallow groundwater in the fluvial influenced deltaic area of the Bengal Basin. 4. Recharge to the IGB aquifer system is substantial and dynamic, controlled by monsoonal rainfall, leakage from canals, river infiltration and irrigation returns. Recharge from rainfall can occur even with low annual rainfall (350 mm) and appears to dominate where rainfall is higher (> 750 mm). Canal leakage is also highly significant and constitutes the largest proportion of groundwater recharge in the drier parts of the aquifer, partially mitigating the effects of abstraction on groundwater storage. 5. Deep groundwater (>150 m) in the Bengal basin has strategic value for water supply, health and economic development. Excessive abstraction poses a greater threat to the quality of this deep groundwater than climate change. Heavy pumping may induce the downward migration of arsenic in parts of Bangladesh, and of saline water in coastal regions, but field evidence and modelling both suggest that deep groundwater abstraction for public water supply in southern Bangladesh is in general secure against widespread ingress of arsenic and saline water for at least 100 years

Development of High Yielding Fusarium Wilt Resistant Cultivar by Pyramiding of “Genes” Through Marker-Assisted Backcrossing in Chickpea (Cicer arietinum L.)

Pusa 391, a mega desi chickpea variety with medium maturity duration is extensively cultivated in the Central Zone of India. Of late, this variety has become susceptible to Fusarium wilt (FW), which has drastic impact on its yield. Presence of variability in the wilt causing pathogen, Fusarium oxysporum f.sp. ciceri (foc) across geographical locations necessitates the role of pyramiding for FW resistance for different races (foc 1,2,3,4 and 5). Subsequently, the introgression lines developed in Pusa 391 genetic background were subjected to foreground selection using three SSR markers (GA16, TA 27 and TA 96) while 48 SSR markers uniformly distributed on all chromosomes, were used for background selection to observe the recovery of recurrent parent genome (RPG). BC1F1 lines with 75–85% RPG recovery were used to generate BC2F1. The plants that showed more than 90% RPG recovery in BC2F1 were used for generating BC3F1. The plants that showed more than 96% RPG recovery were selected and selfed to generate BC3F3. Multi-location evaluation of advanced introgression lines (BC2F3) in six locations for grain yield (kg/ha), days to fifty percent flowering, days to maturity, 100 seed weight and disease incidence was done. In case of disease incidence, the genotype IL1 (BGM 20211) was highly resistant to FW in Junagarh, Indore, New Delhi, Badnapur and moderately resistant at Sehore and Nandyal. GGE biplot analysis revealed that IL1(BGM20211) was the most stable genotype at Junagadh, Sehore and Nandyal. GGE biplot analysis revealed that IL1(BGM 20211) and IL4(BGM 20212) were the top performers in yield and highly stable across six environments and were nominated for Advanced Varietal Trials (AVT) of AICRP (All India Coordinated Research Project on Chickpea) in 2018–19. BGM20211 and BGM 20212 recorded 29 and 28.5% average yield gain over the recurrent parent Pusa 391, in the AVT-1 and AVT-2 over five environments. Thus, BGM20211 was identified for release and notified as Pusa Manav/Pusa Chickpea 20211 for Madhya Pradesh, Gujarat and Maharashtra, Southern Rajasthan, Bundhelkhand region of Uttar Pradesh states by the Central Sub-Committees on Crop Standards, Notification and Release of Varieties of Agricultural Crops, Ministry of Agriculture and Farmers Welfare, Government of India, for commercial cultivation in India (Gazette notification number S.O.500 (E) dt. 29-1-2021).Such pyramided lines give resilience to multiple races of fusarium wilt with added yield advantage

Groundwater in the Indo-Gangetic basin: evolution of groundwater typologies

The Indo-Gangetic Basin comprises one of the world’s most important aquifers. The basin is home to approximately 1 billion people and encompasses northern and eastern India, much of Bangladesh, parts of southern Nepal and the most populous areas of Pakistan. Despite the presence of large rivers, much of the basin’s population are dependent on groundwater for drinking water, and the groundwater resource is highly exploited through an estimated 20 million boreholes to support a globally important agricultural industry. The security of supply from this aquifer is threatened by environmental change and increased abstraction. In order to help understand the aquifer and characterise its resilience to change we have developed a groundwater typology map for the basin

Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size

The high cycle constant stress amplitude fatigue performance of metal matrix composite (MMC) components machined by a milling process was investigated in this study as a function of machining speed, feed rate and reinforcement particle size. The presence of reinforcement and particle size were found to be the most influential factors that affected the fatigue life. In contrast to this, the effect of feed and speed on tool-particle interaction, strain hardening and heat generation during milling of MMCs were balanced in such a way that the contributions of feed and speed on fatigue life were negligible. The interactions of different parameters contributed significantly to the fatigue life which indicated that the modelling of fatigue life based on these three parameters was relatively complex. The fatigue life of the machined MMC samples increased with decreasing particle size and increasing feed. However, the fatigue life was not influenced by speed variation. The presence of smaller or no particles induced a complete separation of failed samples, in contrast to that of specimens containing larger reinforcing particles where crack growth was arrested or deflected by the reinforcing particles

A measurement of the tau mass and the first CPT test with tau leptons

We measure the mass of the tau lepton to be 1775.1+-1.6(stat)+-1.0(syst.) MeV using tau pairs from Z0 decays. To test CPT invariance we compare the masses of the positively and negatively charged tau leptons. The relative mass difference is found to be smaller than 3.0 10^-3 at the 90% confidence level.Comment: 10 pages, 4 figures, Submitted to Phys. Letts.