Poverty and food insecurity in India: A Disaggregated regional profile

This study provides a profile of deprivation with respect to consumer expenditure, cereal consumption and energy intake across demographic and agro-climatic regions as defined by the National Sample Survey Organisation of India. It examines this evidence at the disaggregated level to verify whether a public distribution system (PDS) targeted with reference to estimates of poverty would end up penalizing the non-poor but food insecure. The empirical profiles have also useful policy relevance with respect to decentralized formulation and implementation of the PDS.Consumer expenditure, food insecure, non-poor, poverty, public distribution system

Lean Six Sigma Approach to Improve the Production Process in the Mould Industry: a Case Study

Purpose: The purpose of this article is to explore the optimization of internal process is assumed as a critical factor to be capable of answering to the moulds industries. Consequently, it has been considered essential to adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages. For that purpose, this work aims to apply LEAN principles and techniques to support mould design and manufacturing processes. Methodology/Approach: The methodology used was based on PDCA/DMAIC, with the following stages: Define, Measure, Analyze, Improve and Control. For each stages was taken some of Lean Six Sigma techniques, such as Continuous Improvement, Value Stream Mapping, Pareto analysis and Overall Equipment Effectiveness. Findings: This study results was revealed that there are many areas on the organizations in the Mould Industry, when they utilize otimizations tools obtain hugt successes. With the Pareto analysis was carried out to show that events that contributes the most to the stops. The results were: unavailability of the operator (16.4%), programming the machine (14.4%) and tool exchange (12.4%) In the case of this Mould Industry study was obtained for the CNC machines studies, with the implementation of Lean Six Sigma tools as obtained a improvement about 20% of global OEE. Research Limitation/implication: This research was revealed that there the moulds are Project unique and difficult to analyze. Moreover, this paper reports that the approach LEAN Six Sigma is very interesting for the continuous improvement of processes and profitability of moulds industry. Originality/Value of paper: This research highlight areas of future research using of quality management methods and Lean Six Sigma tools to analyse and optimize production in the moulds industry. Therefore this research It is considered to promote and adopt high-valued methodologies to support tooling industry in order to achieve global competitive advantages.info:eu-repo/semantics/publishedVersio

Intramuscular fat prediction using color and image analysis of bísaro pork breed

This work presents an analytical methodology to predict meat juiciness (discriminant semi-quantitative analysis using groups of intervals of intramuscular fat) and intramuscular fat (regression analysis) in Longissimus thoracis et lumborum (LTL) muscle of Bísaro pigs using as independent variables the animal carcass weight and parameters from color and image analysis. These are non-invasive and non-destructive techniques which allow development of rapid, easy and inexpensive methodologies to evaluate pork meat quality in a slaughterhouse. The proposed predictive supervised multivariate models were non-linear. Discriminant mixture analysis to evaluate meat juiciness by classified samples into three groups—0.6 to 1.1%; 1.25 to 1.5%; and, greater than 1.5%. The obtained model allowed 100% of correct classifications (92% in cross-validation with seven-folds with five repetitions). Polynomial support vector machine regression to determine the intramuscular fat presented R2 and RMSE values of 0.88 and 0.12, respectively in cross-validation with seven-folds with five repetitions. This quantitative model (model’s polynomial kernel optimized to degree of three with a scale factor of 0.1 and a cost value of one) presented R2 and RSE values of 0.999 and 0.04, respectively. The overall predictive results demonstrated the relevance of photographic image and color measurements of the muscle to evaluate the intramuscular fat, rarther than the usual time-consuming and expensive chemical analysis.Work included in the Portuguese PRODER research Project BISOPORC—Pork extensive production of Bísara breed, in two alternative systems: fattening on concentrate vs. chesnut. The CIMO authors are grateful to the Foundation for Science and Technology (FCT, Portugal) for financial support by national funds FCT/MCTES to CIMO (UIDB/00690/2020) and are members of the Healthy Meat network by (CYTED-119RT0568). The CECAV authors are thankful to the project UIDB/CVT/00772/2020 funded by the Foundation for Science and Technology (FCT, Portugal). The authors are grateful to Laboratory of Carcass and Meat Quality of Agriculture School of Polytechnic Institute of Bragança “Cantinho do Alfredo”.UIDB/CVT/00772/2020info:eu-repo/semantics/publishedVersio

Characterization of the volatile fraction emitted by phloems of four pinus species by solid-phase microextraction and gas chromatography–mass spectrometry

Pine forests constitute some of the most important renewable resources supplying timber, paper and chemical industries, among other functions. Characterization of the volatiles emitted by different Pinus species has proven to be an important tool to decode the process of host tree selection by herbivore insects, some of which cause serious economic damage to pines. Variations in the relative composition of the bouquet of semiochemicals are responsible for the outcome of different biological processes, such as mate finding, egg-laying site recognition and host selection. The volatiles present in phloem samples of four pine species, P. halepensis, P. sylvestris, P. pinaster and P. pinea, were identified and characterized with the aim of finding possible host-plant attractants for native pests, such as the bark beetle Tomicus piniperda. The volatile compounds emitted by phloem samples of pines were extracted by headspace solid-phase micro extraction, using a 2 cm 50/30 mm divinylbenzene/carboxen/polydimethylsiloxane table flex solid-phase microextraction fiber and its contents analyzed by high-resolution gas chromatography, using flame ionization and a non polar and chiral column phases. The components of the volatile fraction emitted by the phloem samples were identified by mass spectrometry using time-of-flight and quadrupole mass analyzers. The estimated relative composition was used to perform a discriminant analysis among pine species, by means of cluster and principal component analysis. It can be concluded that it is possible to discriminate pine species based on the monoterpenes emissions of phloem samples

POTENCIALIDADES NATURAIS DO MUNICÍPIO DE MERUOCA- CE

O presente trabalho busca analisar as potencialidades naturais no município de Meruoca, mapeando e gerando informações sobre as condições de uso das mesmas a partir de revisão bibliográfica e trabalho de campo considerando os aspectos naturais e sociais do município

The International development of PROQOL-HCV: An instrument to assess the health-related quality of life of patients treated for Hepatitis C virus

Background Hepatitis C virus (HCV) compromises Health-related Quality of Life (HRQL) with detriments to Physical, Mental and Social health domains. Treatment with interferon and ribavirin is associated with side effects which further impair HRQL. New treatments appear potent, effective and tolerable. However, Patient Reported Outcomes instruments that capture the impact on HRQL for people with hepatitis C are largely non-specific and will be needed in the new treatment era. Therefore, we developed a conceptually valid multidimensional model of HCV-specific quality of life and pilot survey instrument, the Patient Reported Outcome Quality of Life survey for HCV (PROQOL-HCV). Methods HCV patients from France (n = 30), Brazil (n = 20) and Australia (n  = 20) were interviewed to investigate HCV-HRQL issues raised in the scientific literature and by treatment specialists. Interviews were recorded, transcribed and translated into English and French. Results Fifteen content dimensions were derived from the qualitative analysis, refined and fitted to four domains: (1) Physical Health included: fatigue, pain, sleep, sexual impairment and physical activity; (2) Mental Health: psychological distress, psychosocial impact, and cognition; (3) Social Health: support, stigma, social activity, substance use; (4) Treatment: management, side effects, and fear of treatment failure. The impact of some dimensions extended beyond their primary domain including: physical activity, cognition, sleep, sexual impairment, and the three treatment dimensions. A bank of 300 items was constructed to reflect patient reports and, following expert review, reduced to a 72-item pilot questionnaire. Conclusion We present a conceptually valid multidimensional model of HCV-specific quality of life and the pilot survey instrument, PROQOL-HCV. The model is widely inclusive of the experience of hepatitis C and the first to include the treatment dimension

Influência da qualidade dos materiais de reprodução na reflorestação com sobreiro

O sobreiro ocupa em Portugal cerca de 721000 ha o que corresponde a 21,5 % da área fl orestal nacional e 33% da área mundial (APCOR, 2005). A sua distribuição no território nacional traduz não só a sua adaptação a determinadas condições edafo-climaticas, mas tem sido condicionada por várias circunstancias, como o arroteamento, o fogo, o abuso do pastoreio, a exploração agrícola intensiva e as plantações fl orestais que contrariaram ou favoreceram a sua existência nesses locais (Natividade, 1950). A distribuição desta espécie é particularmente signifi cativa em zonas onde têm ocorrido acontecimentos climáticos graves e onde os níveis de desertifi cação humana são críticos. A fi leira da cortiça salienta-se por Portugal ocupar o primeiro lugar entre os países produtores, transformadores e exportadores de cortiça, correspondendo-lhe mais de metade da produção mundial desta matéria-prima. O nosso País é a origem de aproximadamente 60% das transacções de cortiça a nível mundial, valor que sobe para 80% quando nos referimos a transacções de produtos transformados. A nível nacional, o valor das exportações de cortiça representam aproximadamente 0,7% do PIB, 2,24% das exportações e correspondem a mais de 33% do conjunto das exportações de produtos fl orestais (APCOR, 2005). Para além da importância económica do sector corticeiro a nível nacional, o aumento da consciência e do interesse da sociedade nas questões ambientais, faz com que o montado de sobro seja reconhecido cada vez mais como um espaço fl orestal, de elevada biodiversidade, paisagísticamente único, que potencia micro-economias locais baseadas numa agricultura e pastorícia extensivas, interessante para outras actividades como o turismo rural e a caça. O sobreiro tem sido a espécie fl orestal que mais tem benefi ciado dos meios fi nanceiros disponibilizados aos proprietários fl orestais para a refl orestação no âmbito da aplicação das medidas de reforma da Política Agrícola Comum da UE, na arborização das terras agrícolas. Contudo, têm-se registado com frequência elevadas taxas de insucesso na arborização sendo a qualidade dos materiais florestais de reprodução (MFR) apontada como uma das causas. Neste trabalho abordaremos a a qualidade dos materiais de reprodução, considerando-a do ponto de vista genético e fisiológicoN/