A set-up for simultaneous measurement of second harmonic generation and streaming potential and some test applications

We present a measurement cell that allows simultaneous measurement of second harmonic generation (SHG) and streaming potential (SP) at mineral-water interfaces with flat specimen that are suitable for non-linear optical (NLO) studies. The set-up directly yields SHG data for the interface of interest and can also be used to obtain information concerning the influence of flow on NLO signals from that interface. The streaming potential is at present measured against a reference substrate (PTFE). The properties of this inert reference can be independently determined for the same conditions. With the new cell, for the first time the SHG signal and the SP for flat surfaces have been simultaneously measured on the same surface. This can in turn be used to unambiguously relate the two observations for identical solution composition. The SHG test of the cell with a fluorite sample confirmed previously observed differences in NLO signal under flow vs. no flow conditions in sum frequency generation (SFG) investigations. As a second test surface, an inert ("hydrophobic") OTS covered sapphire-c electrolyte interface was studied to verify the zeta-potential measurements with the new cell. For this system we obtained combined zeta-potential/SHG data in the vicinity of the point of zero charge, which were found to be proportional to each other as expected. Furthermore, on the accessible time scales of the SHG measurements no effects of flow, flow velocity and stopped flow occurred on the interfacial water structure. This insensitivity to flow for the inert surface was corroborated by concomitant molecular dynamics simulations. Finally, the set-up was used for simultaneous measurements of the two properties as a function of pH in automated titrations with an oxidic surface. Different polarization combinations obtained in two separate titrations, yielded clearly different SHG data, while under identical conditions zeta-potentials were exactly reproduced. The polarization combination that is characteristic for dipoles perpendicular to the surface scaled with the zeta-potentials over the pH-range studied, while the other did not. The work provides an advanced approach for investigating liquid/surface interactions which play a major role in our environment. The set-up can be upgraded for SFG studies, which will allow more detailed studies on the chemistry and the water structure at a given interface, but also the combined study of specific adsorption including kinetics in combination with electrokinetics. Such investigations are crucial for the basic understanding of many environmental processes from aquatic to atmospheric systems

The role of halide ions in the anisotropic growth of gold nanoparticles: a microscopic, atomistic perspective

We provide a microscopic view of the role of halides in controlling the anisotropic growth of gold nanorods through a combined computational and experimental study. Atomistic molecular dynamics simulations unveil that Br(–) adsorption is not only responsible for surface passivation, but also acts as the driving force for CTAB micelle adsorption and stabilization on the gold surface in a facet-dependent way. The partial replacement of Br(–) by Cl(–) decreases the difference between facets and the surfactant density. Finally, in the CTAC solution, no halides or micellar structures protect the gold surface and further gold reduction should be uniformly possible. Experimentally observed nanoparticle's growth in different CTAB/CTAC mixtures is more uniform and faster as the amount of Cl(–) increases, confirming the picture from the simulations. In addition, the surfactant layer thickness measured on nanorods exposed to CTAB and CTAC quantitatively agrees with the simulation results

Fermi Surface and gap parameter in high-Tc superconductors: the Stripe Quantum Critical Point scenario

We study the single-particle spectral properties of electrons coupled to quasicritical charge and spin fluctuations close to a stripe-phase, which is governed by a Quantum Critical Point near optimum doping. We find that spectral weight is transferred from the quasiparticle peak to incoherent dispersive features. As a consequence the distribution of low-laying spectral weight is modified with respect to the quasiparticle Fermi surface. The interplay of charge and spin fluctuations reproduces features of the observed Fermi surface, such as the asymmetric suppression of spectral weight near the M points of the Brillouin zone. Within the model, we also analyze the interplay between repulsive spin and attractive charge fluctuations in determining the symmetry and the peculiar momentum dependence of the superconducting gap parameter. When both spin and charge fluctuations are coupled to the electrons, we find $d_{x^2-y^2}$-wave gap symmetry in a wide range of parameter. A crossover $d$- vs $s$-wave symmetry of the gap may occur when the strength of charge fluctuations increases with respect to spin fluctuations.Comment: 18 pages, 3 included figures, to be published on Physica

The puzzling issue of silica toxicity: are silanols bridging the gaps between surface states and pathogenicity?

Background: Silica continues to represent an intriguing topic of fundamental and applied research across various scientific fields, from geology to physics, chemistry, cell biology, and particle toxicology. The pathogenic activity of silica is variable, depending on the physico-chemical features of the particles. In the last 50 years, crystallinity and capacity to generate free radicals have been recognized as relevant features for silica toxicity. The ‘surface’ also plays an important role in silica toxicity, but this term has often been used in a very general way, without defining which properties of the surface are actually driving toxicity. How the chemical features (e.g., silanols and siloxanes) and configuration of the silica surface can trigger toxic responses remains incompletely understood. Main body: Recent developments in surface chemistry, cell biology and toxicology provide new avenues to improve our understanding of the molecular mechanisms of the adverse responses to silica particles. New physicochemical methods can finely characterize and quantify silanols at the surface of silica particles. Advanced computational modelling and atomic force microscopy offer unique opportunities to explore the intimate interactions between silica surface and membrane models or cells. In recent years, interdisciplinary research, using these tools, has built increasing evidence that surface silanols are critical determinants of the interaction between silica particles and biomolecules, membranes, cell systems, or animal models. It also has become clear that silanol configuration, and eventually biological responses, can be affected by impurities within the crystal structure, or coatings covering the particle surface. The discovery of new molecular targets of crystalline as well as amorphous silica particles in the immune system and in epithelial lung cells represents new possible toxicity pathways. Cellular recognition systems that detect specific features of the surface of silica particles have been identified. Conclusions: Interdisciplinary research bridging surface chemistry to toxicology is progressively solving the puzzling issue of the variable toxicity of silica. Further interdisciplinary research is ongoing to elucidate the intimate mechanisms of silica pathogenicity, to possibly mitigate or reduce surface reactivity. Keywords: Silica, Silicosis, Lung cancer, Auto-immune diseases, Surface reactivity, Silanol, Coating, Modelling, Spectroscopy, Atomic force microscop

The puzzling issue of silica toxicity: Are silanols bridging the gaps between surface states and pathogenicity?

Background: Silica continues to represent an intriguing topic of fundamental and applied research across various scientific fields, from geology to physics, chemistry, cell biology, and particle toxicology. The pathogenic activity of silica is variable, depending on the physico-chemical features of the particles. In the last 50 years, crystallinity and capacity to generate free radicals have been recognized as relevant features for silica toxicity. The 'surface' also plays an important role in silica toxicity, but this term has often been used in a very general way, without defining which properties of the surface are actually driving toxicity. How the chemical features (e.g., silanols and siloxanes) and configuration of the silica surface can trigger toxic responses remains incompletely understood. Main body: Recent developments in surface chemistry, cell biology and toxicology provide new avenues to improve our understanding of the molecular mechanisms of the adverse responses to silica particles. New physico-chemical methods can finely characterize and quantify silanols at the surface of silica particles. Advanced computational modelling and atomic force microscopy offer unique opportunities to explore the intimate interactions between silica surface and membrane models or cells. In recent years, interdisciplinary research, using these tools, has built increasing evidence that surface silanols are critical determinants of the interaction between silica particles and biomolecules, membranes, cell systems, or animal models. It also has become clear that silanol configuration, and eventually biological responses, can be affected by impurities within the crystal structure, or coatings covering the particle surface. The discovery of new molecular targets of crystalline as well as amorphous silica particles in the immune system and in epithelial lung cells represents new possible toxicity pathways. Cellular recognition systems that detect specific features of the surface of silica particles have been identified. Conclusions: Interdisciplinary research bridging surface chemistry to toxicology is progressively solving the puzzling issue of the variable toxicity of silica. Further interdisciplinary research is ongoing to elucidate the intimate mechanisms of silica pathogenicity, to possibly mitigate or reduce surface reactivity

Single-particle properties of a model for coexisting charge and spin quasi-critical fluctuations coupled to electrons

We study the single-particle spectral properties of a model for coexisting AFM and ICDW critical fluctuations coupled to electrons, which naturally arises in the context of the stripe-quantum-critical-point scenario for high-Tc superconducting materials. Within a perturbative approach, we show that the on-shell inverse scattering time deviates from the normal Fermi-liquid behavior near the points of the Fermi surface connected by the characteristic wave-vectors of the critical fluctuations (hot spots). The anomalous behavior is stronger when the hot spots are located near singular points of the electronic spectrum. The violations to the normal Fermi-liquid behavior are associated with the transfer of spectral weight from the quasi-particle peak to incoherent shadow peaks, which produces an enhancement of incoherent spectral weight near the Fermi level. We use our results to discuss recent ARPES experiments on Bi2212 near optimal doping

Trimesic acid on Cu in ethanol: Potential-dependent transition from 2-D adsorbate to 3-D metal-organic framework

We report the potential-dependent interactions of trimesic acid with Cu surfaces in EtOH. CV experiments and electrochemical surface-enhanced Raman spectroscopy show the presence of an adsorbed trimesic acid layer on Cu at potentials lower than 0 V vs Cu. The BTC coverage increases as the potential increases, reaching a maximum at 0 V. Based on molecular dynamics simulations, we report adsorption geometries and possible structures of the organic adlayer. We find that, depending on the crystal facet, trimesic acid adsorbs either flat or with one or two of the carboxyl groups facing the metal surface. At higher coverages, a multi-layer forms that is composed mostly of flat-lying trimesic acid molecules. Increasing the potential beyond 0 V activates the Cu-adsorbate interface in such a way that under oxidation of Cu to Cu2 +, a 3-D metal-organic framework forms directly on the electrode surface.PS gratefully acknowledges the Max Planck Graduate Center and the Studienstiftung des deutschen Volkes for the funding. KFD gratefully acknowledges the generous funding through the Emmy Noether program of the Deutsche Forschungsgemeinschaft (DO 1691/1-1)