Biomechanics for inclusive urban design : effects of tactile paving on older adults’ gait when crossing the street

In light of our ageing population it is important that the urban environment is easily accessible and hence supports older adults’ independence. Tactile ‘blister’ paving was originally designed to provide guidance for visually impaired people at pedestrian crossings. However, as research links irregular surfaces to falls in older adults, such paving may have an adverse effect on older people. We investigated the effects of tactile paving on older adults’ gait in a scenario closely resembling “crossing the street”. Gait analysis of 32 healthy older adults showed that tactile, as compared to smooth, paving increases the variability in timing of foot placement by 20%, thereby indicating a disturbance of the rhythmic gait pattern. Moreover, toe-clearance during the swing phase increased by 7% on tactile paving, and the ability to stop upon cue from the traffic light was compromised. These results need to be viewed under consideration of the limitations associated with laboratory studies and real world analysis is needed to fully understand their implications for urban design

Negligible impact on posture from 5-diopter vertical yoked prisms

PURPOSE: Yoked prisms are used by some optometrists to adjust posture, but evidence to support this practice is sparse and low level. The aim of this research was to investigate whether vertical yoked prisms have an impact on posture in healthy adults. METHODS: Posture was assessed objectively in 20 healthy adults, by recording a range of joint angles or body segment locations at the ankle, hip, torso, neck, and head during participant observation of a straight-ahead target, and subsequently with eyes closed. Recording occurred before, during, and after wearing goggles with control plano lenses, and 5-diopter (D) base-up and 5-D base-down yoked prisms. In each viewing condition, the goggles were worn for 30 minutes. Interaction effects of lens/prism condition by time on joint angles and body orientation were determined. RESULTS: In the eyes-open and eyes-closed conditions, no significant lens/prism × time interaction effects were found at the torso, neck, hip, or ankle (P > 0.1). However, in both eyes-open and eyes-closed conditions a significant lens/prism × time interaction was found at the head (P = 0.031 and 0.006, respectively), with head extended (tilted backward) by up to 2.5 degrees more while viewing with base-down prisms than with plano lenses. CONCLUSIONS: In healthy adults, 5-D base-down yoked prisms were not associated with a change in body posture. A small effect on head orientation and not at other locations suggests a minimal effect on posture. Research in a larger sample and in individuals with abnormal posture is needed to verify this

Extraction of bodily features for gait recognition and gait attractiveness evaluation

This is the author's accepted manuscript. The final publication is available at Springer via http://dx.doi.org/10.1007/s11042-012-1319-2. Copyright @ 2012 Springer.Although there has been much previous research on which bodily features are most important in gait analysis, the questions of which features should be extracted from gait, and why these features in particular should be extracted, have not been convincingly answered. The primary goal of the study reported here was to take an analytical approach to answering these questions, in the context of identifying the features that are most important for gait recognition and gait attractiveness evaluation. Using precise 3D gait motion data obtained from motion capture, we analyzed the relative motions from different body segments to a root marker (located on the lower back) of 30 males by the fixed root method, and compared them with the original motions without fixing root. Some particular features were obtained by principal component analysis (PCA). The left lower arm, lower legs and hips were identified as important features for gait recognition. For gait attractiveness evaluation, the lower legs were recognized as important features.Dorothy Hodgkin Postgraduate Award and HEFCE

Co‐location of the Downdip End of Seismic Coupling and the Continental Shelf Break

International audienceAlong subduction margins, the morphology of the near shore domain records the combined action of erosion from ocean waves and permanent tectonic deformation from the convergence of plates. We observe that at subduction margins around the globe, the edge of continental shelves tends to be located above the downdip end of seismic coupling on the megathrust. Coastlines lie farther landward at variable distances. This observation stems from a compilation of well-resolved coseismic and interseismic coupling data sets. The permanent interseismic uplift component of the total tectonic deformation can explain the localization of the shelf break. It contributes a short wave-length gradient in vertical deformation on top of the structural and isostatic deformation of the margin. This places a hinge line between seaward subsidence and landward uplift above the downdip end of high coupling. Landward of the hinge line, rocks are uplifted in the domain of wave-base erosion and a shelf is maintained by the competition of rock uplift and wave erosion. Wave erosion then sets the coastline back from the tectonically meaningful shelf break. We combine a wave erosion model with an elastic deformation model to illustrate how the downdip end of high coupling pins the location of the shelf break. In areas where the shelf is wide, onshore geodetic constraints on seismic coupling are limited and could be advantageously complemented by considering the location of the shelf break. Subduction margin morphology integrates hundreds of seismic cycles and could inform the persistence of seismic coupling patterns through time

Quality Output Checklist and Content Assessment (QuOCCA): a new tool for assessing research quality and reproducibility

Research must be well designed, properly conducted and clearly and transparently reported. Our independent medical research institute wanted a simple, generic tool to assess the quality of the research conducted by its researchers, with the goal of identifying areas that could be improved through targeted educational activities. Unfortunately, none was available, thus we devised our own. Here, we report development of the Quality Output Checklist and Content Assessment (QuOCCA), and its application to publications from our institute's scientists. Following consensus meetings and external review by statistical and methodological experts, 11 items were selected for the final version of the QuOCCA: research transparency (items 1-3), research design and analysis (items 4-6) and research reporting practices (items 7-11). Five pairs of raters assessed all 231 articles published in 2017 and 221 in 2018 by researchers at our institute. Overall, the results were similar between years and revealed limited engagement with several recommended practices highlighted in the QuOCCA. These results will be useful to guide educational initiatives and their effectiveness. The QuOCCA is brief and focuses on broadly applicable and relevant concepts to open, high-quality, reproducible and well-reported science. Thus, the QuOCCA could be used by other biomedical institutions and individual researchers to evaluate research publications, assess changes in research practice over time and guide the discussion about high-quality, open science. Given its generic nature, the QuOCCA may also be useful in other research disciplines

Development and evaluation of a tool for the assessment of footwear characteristics

<p>Abstract</p> <p>Background</p> <p>Footwear characteristics have been linked to falls in older adults and children, and the development of many musculoskeletal conditions. Due to the relationship between footwear and pathology, health professionals have a responsibility to consider footwear characteristics in the etiology and treatment of various patient presentations. In order for health professionals and researchers to accurately and efficiently critique an individual's footwear, a valid and reliable footwear assessment tool is required. The aim of this study was to develop a simple, efficient, and reliable footwear assessment tool potentially suitable for use in a range of patient populations.</p> <p>Methods</p> <p>Consideration of previously published tools, other footwear related literature, and clinical considerations of three therapists were used to assist in the development of the tool. The tool was developed to cover fit, general features, general structure, motion control properties, cushioning, and wear patterns. A total of 15 participants (who provided two pairs of shoes each) were recruited, and assessment using the scale was completed on two separate occasions (separated by 1 – 3 weeks) by a physiotherapist and a podiatrist on each participant's dominant foot. Intra-rater and inter-rater reliability were evaluated using intra-class correlation coefficients (ICCs) (model 2, 1) and the 95% limits of agreement (95% LOAs) for continuous items, and percentage agreement and kappa (κ) statistics for categorical items.</p> <p>Results</p> <p>All categorical items demonstrated high percentage agreement statistic for intra-rater (83 – 100%) and inter-rater (83 – 100%) comparisons. With the exception of last shape and objective measures used to categorise the adequacy of length, excellent intra-rater (ICC = 0.91 – 1.00) and inter-rater reliability (ICC = 0.90 – 1.00) was indicated for continuous items in the tool, including the motion control properties scale (0.91 – 0.95).</p> <p>Conclusion</p> <p>A comprehensive footwear assessment tool with good face validity has been developed to assist future research and clinical footwear assessment. Generally good reliability amongst all items indicates that the tool can be used with confidence in research and clinical settings. Further research is now required to determine the clinical validity of each item in various patient populations.</p

Mott transition from a diluted exciton gas to a dense electron-hole plasma in a single V-shaped quantum wire

We report on the study of many-body interactions in a single high quality V-shaped quantum wire by means of continuous and time-resolved microphotoluminescence. The transition from a weakly interacting exciton gas when the carrier density n is less than 10^5 cm^-1 (i.e. n aX < 0.1, with aX the exciton Bohr radius), to a dense electron-hole plasma (n > 10^6 cm^-1, i.e. n aX > 1) is systematically followed in the system as the carrier density is increased. We show that this transition occurs gradually : the free carriers first coexist with excitons for n aX > 0.1, then the electron-hole plasma becomes degenerate at n aX = 0.8. We also show that the non-linear effects are strongly related to the kind of disorder and localization properties in the structure especially in the low density regime.Comment: 5 figure

Altering gait by way of stimulation of the plantar surface of the foot: the immediate effect of wearing textured insoles in older fallers

Background: Evidence suggests that textured insoles can alter gait and standing balance by way of enhanced plantar tactile stimulation. However, to date, this has not been explored in older people at risk of falling. This study investigated the immediate effect of wearing textured insoles on gait and double-limb standing balance in older fallers.Methods: Thirty older adults >65 years (21 women, mean [SD] age 79.0 [7.1]), with self-reported history of ≥2 falls in the previous year, conducted tests of level-ground walking over 10 m (GAITRite system), and double-limb standing with eyes open and eyes closed over 30 seconds (Kistler force platform) under two conditions: wearing textured insoles (intervention) and smooth (control) insoles in their usual footwear.Results: Wearing textured insoles caused significantly lower gait velocity (P = 0.02), step length (P = 0.04) and stride length (P = 0.03) compared with wearing smooth insoles. No significant differences were found in any of the balance parameters (P > 0.05).Conclusions: A textured insole worn by older adults with a history of falls significantly lowers gait velocity, step length and stride length, suggesting that this population may not have an immediate benefit from this type of intervention. The effects of prolonged wear remain to be investigated