8 research outputs found
ATLAS Experiment Silicon Detector Alignment
ATLAS Experiment at the CERN's Large Hadron Collider is expected to start taking data at the end of 2007. The Atlas detector's tracking reconstruction is performed by drift tube and silicon based subdetectors. For the alignment of the silicon tracker, a combination of a hardware system and track based algorithms is planned to be used. In order to achieve the physics goals, ATLAS tracking requires that the position of the modules of the silicon tracker to be known with a precision better than about 10 microns. The whole silicon detector consists of a total of 5832 such modules with corresponding ~35000 degrees of freedom, therefore, obtaining the desired precision necessitates the design of non-trivial alignment strategies, and novel techniques both in hardware and software. We will first describe the Atlas inner detector and give the status of its commissioning. We will then introduce the proposed track based alignment algorithms for the silicon detector and their implementation into the ATLAS software framework, with more concentration given on one of the algorithms, which uses a global and simultaneous fit of all particle trajectories and alignment parameters. Performances and initial results from a combined test beam setup and from cosmic ray data taking will be discussed, where more emphasis will be given on the latter
Collider aspects of flavour physics at high Q
This review presents flavour related issues in the production and decays of
heavy states at LHC, both from the experimental side and from the theoretical
side. We review top quark physics and discuss flavour aspects of several
extensions of the Standard Model, such as supersymmetry, little Higgs model or
models with extra dimensions. This includes discovery aspects as well as
measurement of several properties of these heavy states. We also present public
available computational tools related to this topic.Comment: Report of Working Group 1 of the CERN Workshop ``Flavour in the era
of the LHC'', Geneva, Switzerland, November 2005 -- March 200
Search for Low Scale Gravity Signatures in ATLAS
The ATLAS detector may reveal in the LHC collisions signatures of extra dimensional models which predict quantum gravity at the TeV scale. One of the most dramatic consequences of such models is the copious production of micro blackholes. Micro blackholes can yield distinct signatures with large multiplicity and large energy release in the ATLAS detector. Extra dimensional models also predict the existence of Kaluza-Klein partners of SM gauge bosons, such as the excited graviton and gluon. These particles can be searched for in their two-body decays. The emerging final state particles are highly energetic, thus requiring novel reconstruction techniques, in particular in the heavy quark (t, b) channels. I will summarize the current status of the low scale gravity studies in ATLAS with example signatures
Collider aspects of flavor physics at high Q
This chapter of the 'Flavor in the era of LHC' workshop report discusses flavor-related issues in the production and decays of heavy states at the LHC at high momentum transfer Q, both from the experimental and the theoretical perspective. We review top quark physics, and discuss the flavor aspects of several extensions of the standard model, such as supersymmetry, little Higgs models or models with extra dimensions. This includes discovery aspects, as well as the measurement of several properties of these heavy states. We also present publicly available computational tools related to this topic. © Springer-Verlag / Società Italiana di Fisica 2008
The integration and engineering of the ATLAS SemiConductor Tracker Barrel.
The ATLAS SemiConductor Tracker (SCT) was built in three sections: a barrel and two end-caps. This paper describes the design, construction and final integration of the barrel section. The barrel is constructed around four nested cylinders that provide a stable and accurate support structure for the 2112 silicon modules and their associated services. The emphasis of this paper is directed at the aspects of engineering design that turned a concept into a fully-functioning detector, as well as the integration and testing of large sub-sections of the final SCT barrel detector. The paper follows the chronology of the construction. The main steps of the assembly are described with the results of intermediate tests. The barrel service components were developed and fabricated in parallel so that a flow of detector modules, cooling loops, opto-harnesses and Frequency-Scanning-Interferometry (FSI) alignment structures could be assembled onto the four cylinders. Once finished, each cylinder was conveyed to the next site for the mounting of modules to form a complete single barrel. Extensive electrical and thermal function tests were carried out on the completed single barrels. In the next stage, the four single barrels and thermal enclosures were combined into the complete SCT barrel detector so that it could be integrated with the Transition Radiation Tracker (TRT) barrel to form the central part of the ATLAS inner detector. Finally, the completed SCT barrel was tested together with the TRT barrel in noise tests and using cosmic rays
The integration and engineering of the ATLAS SemiConductor Tracker Barrel.
The ATLAS SemiConductor Tracker (SCT) was built in three sections: a barrel and two end-caps. This paper describes the design, construction and final integration of the barrel section. The barrel is constructed around four nested cylinders that provide a stable and accurate support structure for the 2112 silicon modules and their associated services. The emphasis of this paper is directed at the aspects of engineering design that turned a concept into a fully-functioning detector, as well as the integration and testing of large sub-sections of the final SCT barrel detector. The paper follows the chronology of the construction. The main steps of the assembly are described with the results of intermediate tests. The barrel service components were developed and fabricated in parallel so that a flow of detector modules, cooling loops, opto-harnesses and Frequency-Scanning-Interferometry (FSI) alignment structures could be assembled onto the four cylinders. Once finished, each cylinder was conveyed to the next site for the mounting of modules to form a complete single barrel. Extensive electrical and thermal function tests were carried out on the completed single barrels. In the next stage, the four single barrels and thermal enclosures were combined into the complete SCT barrel detector so that it could be integrated with the Transition Radiation Tracker (TRT) barrel to form the central part of the ATLAS inner detector. Finally, the completed SCT barrel was tested together with the TRT barrel in noise tests and using cosmic rays
The integration and engineering of the ATLAS SemiConductor Tracker Barrel.
The ATLAS SemiConductor Tracker (SCT) was built in three sections: a barrel and two end-caps. This paper describes the design, construction and final integration of the barrel section. The barrel is constructed around four nested cylinders that provide a stable and accurate support structure for the 2112 silicon modules and their associated services. The emphasis of this paper is directed at the aspects of engineering design that turned a concept into a fully-functioning detector, as well as the integration and testing of large sub-sections of the final SCT barrel detector. The paper follows the chronology of the construction. The main steps of the assembly are described with the results of intermediate tests. The barrel service components were developed and fabricated in parallel so that a flow of detector modules, cooling loops, opto-harnesses and Frequency-Scanning-Interferometry (FSI) alignment structures could be assembled onto the four cylinders. Once finished, each cylinder was conveyed to the next site for the mounting of modules to form a complete single barrel. Extensive electrical and thermal function tests were carried out on the completed single barrels. In the next stage, the four single barrels and thermal enclosures were combined into the complete SCT barrel detector so that it could be integrated with the Transition Radiation Tracker (TRT) barrel to form the central part of the ATLAS inner detector. Finally, the completed SCT barrel was tested together with the TRT barrel in noise tests and using cosmic rays