42 research outputs found
La surveillance des moyens de paiement et des systèmes d’échange.
Le premier rapport sur la surveillance des moyens de paiement et des systèmes d’échange de la Banque de France présente le cadre dans lequel s’inscrit la mission de surveillance, le résultat des évaluations réalisées et les enjeux pour l’avenir.Surveillance, moyen de paiement, instrument de paiement, système d’échange, système de paiement, système de compensation et de règlement d’instruments financiers.
Seasonal variations in aerosol particle composition at the puy-de-Dôme research station in France
Detailed investigations of the chemical and microphysical properties of atmospheric aerosol particles were performed at the puy-de-Dôme (pdD) research station (1465 m) in autumn (September and October 2008), winter (February and March 2009), and summer (June 2010) using a compact Time-of-Flight Aerosol Mass Spectrometer (cToF-AMS). Over the three campaigns, the average mass concentrations of the non-refractory submicron particles ranged from 10 μg m<sup>&minus;3</sup> up to 27 μg m<sup>&minus;3</sup>. Highest nitrate and ammonium mass concentrations were measured during the winter and during periods when marine modified airmasses were arriving at the site, whereas highest concentrations of organic particles were measured during the summer and during periods when continental airmasses arrived at the site. The measurements reported in this paper show that atmospheric particle composition is strongly influenced by both the season and the origin of the airmass. The total organic mass spectra were analysed using positive matrix factorisation to separate individual organic components contributing to the overall organic particle mass concentrations. These organic components include a low volatility oxygenated organic aerosol particle (LV-OOA) and a semi-volatile organic aerosol particle (SV-OOA). Correlations of the LV-OOA components with fragments of <i>m/z</i> 60 and <i>m/z</i> 73 (mass spectral markers of wood burning) during the winter campaign suggest that wintertime LV-OOA are related to aged biomass burning emissions, whereas organic aerosol particles measured during the summer are likely linked to biogenic sources. Equivalent potential temperature calculations, gas-phase, and LIDAR measurements define whether the research site is in the planetary boundary layer (PBL) or in the free troposphere (FT)/residual layer (RL). We observe that SV-OOA and nitrate particles are associated with air masses arriving from the PBL where as particle composition measured from RL/FT airmasses contain high mass fractions of sulphate and LV-OOA. This study provides unique insights into the effects of season and airmass variability on regional aerosol particles measured at an elevated site
Recommended from our members
How can existing ground-based profiling instruments improve European weather forecasts?
Observations of profiles of winds, aerosol, clouds, winds, temperature and humidity in the lowest few km of the atmosphere from networks of ceilometers, Doppler wind lidars and microwave radiometers are starting to flow in real time to forecasting centers in Europe.
To realise the promise of improved predictions of hazardous weather such as flash floods, wind storms, fog and poor air quality from high-resolution mesoscale models, the forecast models must be initialized with an accurate representation of the current state of the atmosphere, but the lowest few km are hardly accessible by satellite, especially in dynamically-active conditions. We report on recent European developments in the exploitation of existing ground-based profiling instruments so that they are networked and able to send data in real-time to forecast centers. The three classes of instruments are: (i) Automatic lidars and ceilometers providing backscatter profiles of clouds, aerosols, dust, fog and volcanic ash, the last two being especially important for air traffic control; (ii) Doppler wind lidars deriving profiles of wind, turbulence, wind shear, wind-gusts and low-level jets; and (iii) Microwave radiometers estimating profiles of temperature and humidity in nearly all weather conditions. Twenty-two European countries and fifteen European National Weather Services are collaborating in the project, that involves the implementation of common operating procedures, instrument calibrations, data formats and retrieval algorithms. Currently, data from 220 ceilometers in 17 countries are being distributed in near real-time to national weather forecast centers; this should soon rise to many hundreds. The wind lidars should start delivering real time data in late 2018, and the plan is to incorporate the microwave radiometers in 2019. Initial data assimilation tests indicate a positive impact of the new data
Physical and optical properties of 2010 Eyjafjallajökull volcanic eruption aerosol: ground-based, Lidar and airborne measurements in France
International audienceDuring the Eyjafjallajökull eruption (14 April to 24 May 2010), the volcanic aerosol cloud was observed across Europe by several airborne in situ and ground-based remote-sensing instruments. On 18 and 19 May, layers of depolarizing particles (i.e. non-spherical particles) were detected in the free troposphere above the Puy de Dôme station, (PdD, France) with a Rayleigh-Mie LIDAR emitting at a wavelength of 355 nm, with parallel and crossed polarization channels. These layers in the free troposphere (FT) were also well captured by simulations with the Lagrangian particle dispersion model FLEXPART, which furthermore showed that the ash was eventually entrained into the planetary boundary layer (PBL). Indeed, the ash cloud was then detected and characterized with a comprehensive set of in situ instruments at the Puy de Dôme station (PdD). In agreement with the FLEXPART simulation, up to 65 μg m−3 of particle mass and 2.2 ppb of SO2 were measured at PdD, corresponding to concentrations higher than the 95 percentile of 2 yr of measurements at PdD. Moreover, the number concentration of particles increased to 24 000 cm−3, mainly in the submicronic mode, but a supermicronic mode was also detected with a modal diameter of 2 μm. The resulting optical properties of the ash aerosol were characterized by a low scattering Ångström exponent (0.98), showing the presence of supermicronic particles. For the first time to our knowledge, the combination of in situ optical and physical characterization of the volcanic ash allowed the calculation of the mass-to-extinction ratio (η) with no assumptions on the aerosol density. The mass-to-extinction ratio was found to be significantly different from the background boundary layer aerosol (max: 1.57 g m−2 as opposed to 0.33 ± 0.03 g m−2). Using this ratio, ash mass concentration in the volcanic plume derived from LIDAR measurements was found to be 655 ± 23 μg m−3 when the plume was located in the FT (3000 m above the sea level - a.s.l.). This ratio could also be used to retrieve an aerosol mass concentration of 579 ± 60 μg m−3 on 19 April, when LIDAR observations detected the ash cloud at 3000 m a.s.l. in correspondence with model simulations (FLEXPART). On 22 April, another ash plume entered the BL, and although it was more diluted than during the May episode, the French research aircraft ATR42 that passed over Clermont-Ferrand in the PBL confirmed the presence of particles with a supermicronic mode, again with a modal diameter at 2 μm. This data set combining airborne, ground-based and remote sensing observations with dispersion model simulations shows an overall very good coherence during the volcanic eruption period, which allows a good confidence in the characteristics of the ash particles that can be derived from this unique data set
Major contribution of neutral clusters to new particle formation at the interface between the boundary layer and the free troposphere
The formation of new aerosol particles in the atmosphere is a key process influencing the aerosol number concentration as well as the climate, in particular at high altitude, where the newly formed particles directly influence cloud formation. However, free tropospheric new particle formation (NPF) is poorly documented due to logistic limitations and complex atmospheric dynamics around high-altitude stations that make the observation of this day-time process challenging. Recent improvements in measurement techniques make now possible the detection of neutral clusters down to similar to 1 nm sizes, which opens new horizons in our understanding of the nucleation process. Indeed, only the charged fraction of clusters has been reported in the upper troposphere up to now. Here we report day-time concentrations of charged and neutral clusters (1 to 2.5 nm mobility diameter) recorded at the interface between the boundary layer (BL) and the FT as well as in the FT at the altitude site of Puy de Dome (1465 m a.s.l.), central France, between 10 and 29 February 2012. Our findings demonstrate that in the FT, and especially at the interface between the BL and the FT, the formation of 1.5 nm neutral clusters significantly exceeds the one of ionic clusters during NPF events, clearly indicating that they dominate in the nucleation process. We also observe that the total cluster concentration significantly increases during NPF events compared to the other days, which was not clearly observed for the charged cluster population in the past. During the studied period, the nucleation process does not seem to be sulfuric acid-limited and could be promoted by the transport of pollutants to the upper troposphere, coupled with low temperatures.Peer reviewe
Transport of Po Valley aerosol pollution to the northwestern Alps – Part 1: Phenomenology
Mountainous regions are often considered pristine environments;
however they can be affected by pollutants emitted in more populated and
industrialised areas, transported by regional winds. Based on experimental
evidence, further supported by modelling tools, here we demonstrate and quantify
the impact of air masses transported from the Po Valley, a European
atmospheric pollution hotspot, to the northwestern Alps. This is achieved
through a detailed investigation of the phenomenology of near-range (a few
hundred kilometres), trans-regional transport, exploiting synergies of
multi-sensor observations mainly focussed on particulate matter. The explored
dataset includes vertically resolved data from atmospheric profiling
techniques (automated lidar ceilometers, ALCs), vertically integrated aerosol
properties from ground (sun photometer) and space, and in situ measurements
(PM10 and PM2.5, relevant chemical analyses, and aerosol
size distribution). During the frequent advection episodes from the Po basin,
all the physical quantities observed by the instrumental setup are found to
significantly increase: the scattering ratio from ALC reaches values >30,
aerosol optical depth (AOD) triples, surface PM10 reaches
concentrations >100 µg m−3 even in rural areas, and
contributions to PM10 by secondary inorganic compounds such as
nitrate, ammonium, and sulfate increase up to 28 %, 8 %, and 17 %,
respectively. Results also indicate that the aerosol advected from the Po
Valley is hygroscopic, smaller in size, and less light-absorbing compared to
the aerosol type locally emitted in the northwestern Italian Alps. In this
work, the phenomenon is exemplified through detailed analysis and discussion
of three case studies, selected for their clarity and relevance within the
wider dataset, the latter being fully exploited in a companion paper
quantifying the impact of this phenomenology over the long-term
(Diémoz et al., 2019). For the three case studies investigated, a high-resolution
numerical weather prediction model (COSMO) and a Lagrangian tool (LAGRANTO)
are employed to understand the meteorological mechanisms favouring
transport and to demonstrate the Po Valley origin of the air masses. In
addition, a chemical transport model (FARM) is used to further support the
observations and to partition the contributions of local and non-local
sources. Results show that the simulations are important to the understanding
of the phenomenon under investigation. However, in quantitative terms,
modelled PM10 concentrations are 4–5 times lower than the ones
retrieved from the ALC and maxima are anticipated in time by 6–7 h.
Underestimated concentrations are likely mainly due to deficiencies in the
emission inventory and to water uptake of the advected particles not fully
reproduced by FARM, while timing mismatches are likely an effect of
suboptimal simulation of up-valley and down-valley winds by COSMO. The
advected aerosol is shown to remarkably degrade the air quality of the Alpine
region, with potential negative effects on human health, climate, and
ecosystems, as well as on the touristic development of the investigated area.
The findings of the present study could also help design mitigation
strategies at the trans-regional scale in the Po basin and suggest an
observation-based approach to evaluate the outcome of their implementation.</p
Recommended from our members
A methodology for investigating dust model performance using synergistic EARLINET/AERONET dust concentration retrievals
Systematic measurements of dust concentration profiles at a continental scale were recently made possible by the development of synergistic retrieval algorithms using combined lidar and sun photometer data and the establishment of robust remote-sensing networks in the framework of Aerosols, Clouds, and Trace gases Research InfraStructure Network (ACTRIS)/European Aerosol Research Lidar Network (EARLINET). We present a methodology for using these capabilities as a tool for examining the performance of dust transport models. The methodology includes considerations for the selection of a suitable data set and appropriate metrics for the exploration of the results. The approach is demonstrated for four regional dust transport models (BSC-DREAM8b v2, NMMB/BSC-DUST, DREAMABOL, DREAM8-NMME-MACC) using dust observations performed at 10 ACTRIS/EARLINET stations. The observations, which include coincident multi-wavelength lidar and sun photometer measurements, were processed with the Lidar-Radiometer Inversion Code (LIRIC) to retrieve aerosol concentration profiles. The methodology proposed here shows advantages when compared to traditional evaluation techniques that utilize separately the available measurements such as separating the contribution of dust from other aerosol types on the lidar profiles and avoiding model assumptions related to the conversion of concentration fields to aerosol extinction values. When compared to LIRIC retrievals, the simulated dust vertical structures were found to be in good agreement for all models with correlation values between 0.5 and 0.7 in the 1–6 km range, where most dust is typically observed. The absolute dust concentration was typically underestimated with mean bias values of -40 to -20 μg m−3 at 2 km, the altitude of maximum mean concentration. The reported differences among the models found in this comparison indicate the benefit of the systematic use of the proposed approach in future dust model evaluation studies
Aerosol backscatter profiles from ceilometers: validation of water vapor correction in the framework of CeiLinEx2015
With the rapidly growing number of automated single-wavelength backscatter
lidars (ceilometers), their potential benefit for aerosol remote sensing
received considerable scientific attention. When studying the accuracy of
retrieved particle backscatter coefficients, it must be considered that most
of the ceilometers are influenced by water vapor absorption in the spectral
range around 910 nm. In the literature methodologies have been proposed to correct for this
effect; however, a validation was not yet performed. In
the framework of the ceilometer intercomparison campaign CeiLinEx2015 in
Lindenberg, Germany, hosted by the German Weather Service, it was possible to
tackle this open issue. Ceilometers from Lufft (CHM15k and CHM15kx, operating
at 1064 nm), from Vaisala (CL51 and CL31) and from Campbell Scientific
(CS135), all operating at a wavelength of approximately 910 nm, were
deployed together with a multi-wavelength research lidar (RALPH) that served
as a reference. In this paper the validation of the water vapor correction is
performed by comparing ceilometer backscatter signals with measurements of
the reference system extrapolated to the water vapor regime. One inherent
problem of the validation is the spectral extrapolation of particle optical
properties. For this purpose AERONET measurements and inversions of RALPH
signals were used. Another issue is that the vertical range where validation
is possible is limited to the upper part of the mixing layer due to incomplete
overlap and the generally low signal-to-noise ratio and signal artifacts
above that layer. Our intercomparisons show that the water vapor correction
leads to quite a good agreement between the extrapolated reference signal and
the measurements in the case of CL51 ceilometers at one or more wavelengths
in the specified range of the laser diode's emission. This ambiguity is due
to the similar effective water vapor transmission at several wavelengths. In
the case of CL31 and CS135 ceilometers the validation was not always
successful. That suggests that error sources beyond the water vapor
absorption might be dominant. For future applications we recommend monitoring
the emitted wavelength and providing “dark” measurements on a regular
basis.</p
Tropospheric and stratospheric smoke over Europe as observed within EARLINET/ACTRIS in summer 2017
For several weeks in summer 2017, strong smoke layers were observed over Europe at numerous EARLINET
stations. EARLINET is the European research lidar network and part of ACTRIS and comprises more than 30
ground-based lidars.
The smoke layers were observed in the troposphere as well as in the stratosphere up to 25 km from Northern
Scandinavia over whole western and central Europe to the Mediterranean regions.
Backward trajectory analysis among other tools revealed that these smoke layers originated from strong wild fires
in western Canada in combination with pyrocumulus convection. An extraordinary fire event in the mid of August
caused intense smoke layers that were observed across Europe for several weeks starting on 18 August 2017.
Maximum aerosol optical depths up to 1.0 at 532 nm were observed at Leipzig, Germany, on 22 August 2017
during the peak of this event.
The stratospheric smoke layers reached extinction coefficient values of more than 600 Mm−1 at 532 nm, a factor
of 10 higher than observed for volcanic ash after the Pinatubo eruption in the 1990s. First analyses of the intensive
optical properties revealed low particle depolarization values at 532 nm for the tropospheric smoke (spherical
particles) and rather high values (up to 20%) in the stratosphere. However, a strong wavelength dependence of
the depolarization ratio was measured for the stratospheric smoke. This indicates irregularly shaped stratospheric
smoke particles in the size range of the accumulation mode. This unique depolarization feature makes it possible
to distinguish clearly smoke aerosol from cirrus clouds or other aerosol types by polarization lidar measurements.
Particle extinction-to-backscatter ratios were rather low in the order of 40 to 50 sr at 355 nm, while values between
70-90 sr were measured at higher wavelengths.
In the western and central Mediterranean, stratospheric smoke layers were most prominent in the end of August
at heights between 16 and 20 km. In contrast, stratospheric smoke started to occur in the eastern Mediterranean
(Cyprus and Israel) in the beginning of September between 18 and 23 km. Stratospheric smoke was still visible in
the beginning of October at certain locations (e.g. Evora, Portugal), while tropospheric smoke was mainly observed
until the end of August within Europe.
An overview of the smoke layers measured at several EARLINET sites will be given. The temporal development
of these layers as well as their geometrical and optical properties will be presented
Peut-on reduire l'incidence des odeurs sexuelles des viandes de porcs males entiers en diminuant le poids a l'abattage ?
National audienc