1,988 research outputs found
Self-Propelled Soft Everting Toroidal Robot for Navigation and Climbing in Confined Spaces
There are many spaces inaccessible to humans where robots could help deliver
sensors and equipment. Many of these spaces contain three-dimensional
passageways and uneven terrain that pose challenges for robot design and
control. Everting toroidal robots, which move via simultaneous eversion and
inversion of their body material, are promising for navigation in these types
of spaces. We present a novel soft everting toroidal robot that propels itself
using a motorized device inside an air-filled membrane. Our robot requires only
a single control signal to move, can conform to its environment, and can climb
vertically with a motor torque that is independent of the force used to brace
the robot against its environment. We derive and validate models of the forces
involved in its motion, and we demonstrate the robot's ability to navigate a
maze and climb a pipe.Comment: 7 pages and 8 figures. Accepted to IEEE Conference on Intelligent
Robots and Systems (IROS 2022). Video available at
https://youtu.be/R0TlKPLbM9
Theoretical and experimental studies of the underlying processes and techniques of low pressure measurement Letter report, 1 Jul. 1967 - 31 May 1968
Ionization gage behavior in various gas mixtures and atmospheric composition
Theoretical and experimental studies of the underlying processes and techniques of low pressure measurement Progress report, 1 Jun. 1966 - 31 May 1967
Construction, testing, and refining of vacuum gauges - ionization gauge cross section ratio
Soft Wrist Exosuit Actuated by Fabric Pneumatic Artificial Muscles
Recently, soft actuator-based exosuits have gained interest, due to their
high strength-to-weight ratio, inherent safety, and low cost. We present a
novel wrist exosuit actuated by fabric pneumatic artificial muscles that can
move the wrist in flexion/extension and ulnar/radial deviation. We derive a
model representing the torque exerted by the exosuit and introduce a
model-based optimization methodology for the selection of placement parameters
of the exosuit muscles. We evaluate the accuracy of the model by measuring the
exosuit torques throughout the full range of wrist flexion/extension. When
accounting for the displacement of the mounting points, the model predicts the
exosuit torque with a mean absolute error of 0.279 Nm, which is 26.1% of the
average measured torque. To explore the capabilities of the exosuit to move the
human body, we measure its range of motion on a passive human wrist; the
exosuit is able to achieve 55.0% of the active biological range in flexion,
69.1% in extension, 68.6% in ulnar deviation, and 68.4% in radial deviation.
Finally, we demonstrate the device controlling the passive human wrist to move
to a desired orientation in the flexion/extension plane and along a
two-degree-of-freedom trajectory.Comment: 16 pages, 15 figure
Vine Robots: Design, Teleoperation, and Deployment for Navigation and Exploration
A new class of continuum robots has recently been explored, characterized by
tip extension, significant length change, and directional control. Here, we
call this class of robots "vine robots," due to their similar behavior to
plants with the growth habit of trailing. Due to their growth-based movement,
vine robots are well suited for navigation and exploration in cluttered
environments, but until now, they have not been deployed outside the lab.
Portability of these robots and steerability at length scales relevant for
navigation are key to field applications. In addition, intuitive
human-in-the-loop teleoperation enables movement in unknown and dynamic
environments. We present a vine robot system that is teleoperated using a
custom designed flexible joystick and camera system, long enough for use in
navigation tasks, and portable for use in the field. We report on deployment of
this system in two scenarios: a soft robot navigation competition and
exploration of an archaeological site. The competition course required movement
over uneven terrain, past unstable obstacles, and through a small aperture. The
archaeological site required movement over rocks and through horizontal and
vertical turns. The robot tip successfully moved past the obstacles and through
the tunnels, demonstrating the capability of vine robots to achieve navigation
and exploration tasks in the field.Comment: IEEE Robotics and Automation Magazine, 2019. Video available at
https://youtu.be/9NtXUL69g_
Using meta-patterns to construct patterns
International audienceThe pattern notion defines techniques allowing the existing knowledge reuse. Usually, the knowledge encapsulated in these patterns is stored in classic library repositories that quickly become overcrowded. To solve this problem, [1] proposes the use of process maps in order to organize and select them. But the completeness of the maps is a very important problem that has to be solved in order to offer a useful guidance to the method engineer. This paper proposes a guideline pattern construction technique guiding engineers when creating the maps
Surface grafting of electrospun fibers using ATRP and RAFT for the control of biointerfacial interactions
BACKGROUND The ability to present signalling molecules within a low fouling 3D environment that mimics the extracellular matrix is an important goal for a range of biomedical applications, both in vitro and in vivo. Cell responses can be triggered by non-specific protein interactions occurring on the surface of a biomaterial, which is an undesirable process when studying specific receptor-ligand interactions. It is therefore useful to present specific ligands of interest to cell surface receptors in a 3D environment that minimizes non-specific interactions with biomolecules, such as proteins. METHOD In this study, surface-initiated atom transfer radical polymerization (SI-ATRP) of poly(ethylene glycol)-based monomers was carried out from the surface of electrospun fibers composed of a styrene/vinylbenzyl chloride copolymer. Surface initiated radical addition-fragmentation chain transfer (SI-RAFT) polymerisation was also carried out to generate bottle brush copolymer coatings consisting of poly(acrylic acid) and poly(acrylamide). These were grown from surface trithiocarbonate groups generated from the chloromethyl styrene moieties existing in the original synthesised polymer. XPS was used to characterise the surface composition of the fibers after grafting and after coupling with fluorine functional XPS labels. RESULTS Bottle brush type coatings were able to be produced by ATRP which consisted of poly(ethylene glycol) methacrylate and a terminal alkyne-functionalised monomer. The ATRP coatings showed reduced non-specific protein adsorption, as a result of effective PEG incorporation and pendant alkynes groups existing as part of the brushes allowed for further conjugation of via azide-alkyne Huisgen 1,3-dipolar cycloaddition. In the case of RAFT, carboxylic acid moieties were effectively coupled to an amine label via amide bond formation. In each case XPS analysis demonstrated that covalent immobilisation had effectively taken place. CONCLUSION Overall, the studies presented an effective platform for the preparation of 3D scaffolds which contain effective conjugation sites for attachment of specific bioactive signals of interest, as well as actively reducing non-specific protein interactions.This research was supported by the Cooperative Research Centre for
Polymers (CRCP)
- …