Patterns of impact resulting from a 'sit less, move more' web-based program in sedentary office employees.

PURPOSE: Encouraging office workers to 'sit less and move more' encompasses two public health priorities. However, there is little evidence on the effectiveness of workplace interventions for reducing sitting, even less about the longer term effects of such interventions and still less on dual-focused interventions. This study assessed the short and mid-term impacts of a workplace web-based intervention (Walk@WorkSpain, W@WS; 2010-11) on self-reported sitting time, step counts and physical risk factors (waist circumference, BMI, blood pressure) for chronic disease. METHODS: Employees at six Spanish university campuses (n=264; 42±10 years; 171 female) were randomly assigned by worksite and campus to an Intervention (used W@WS; n=129; 87 female) or a Comparison group (maintained normal behavior; n=135; 84 female). This phased, 19-week program aimed to decrease occupational sitting time through increased incidental movement and short walks. A linear mixed model assessed changes in outcome measures between the baseline, ramping (8 weeks), maintenance (11 weeks) and follow-up (two months) phases for Intervention versus Comparison groups. RESULTS: A significant 2 (group) × 2 (program phases) interaction was found for self-reported occupational sitting (F[3]=7.97, p=0.046), daily step counts (F[3]=15.68, p=0.0013) and waist circumference (F[3]=11.67, p=0.0086). The Intervention group decreased minutes of daily occupational sitting while also increasing step counts from baseline (446±126; 8,862±2,475) through ramping (+425±120; 9,345±2,435), maintenance (+422±123; 9,638±3,131) and follow-up (+414±129; 9,786±3,205). In the Comparison group, compared to baseline (404±106), sitting time remained unchanged through ramping and maintenance, but decreased at follow-up (-388±120), while step counts diminished across all phases. The Intervention group significantly reduced waist circumference by 2.1cms from baseline to follow-up while the Comparison group reduced waist circumference by 1.3cms over the same period. CONCLUSIONS: W@WS is a feasible and effective evidence-based intervention that can be successfully deployed with sedentary employees to elicit sustained changes on "sitting less and moving more"

A systematic review of correlates of sedentary behaviour in adults aged 18–65 years: a socio-ecological approach

Background: Recent research shows that sedentary behaviour is associated with adverse cardio-metabolic consequences even among those considered sufficiently physically active. In order to successfully develop interventions to address this unhealthy behaviour, factors that influence sedentariness need to be identified and fully understood. The aim of this review is to identify individual, social, environmental, and policy-related determinants or correlates of sedentary behaviours among adults aged 18-65 years. Methods: PubMed, Embase, CINAHL, PsycINFO and Web of Science were searched for articles published between January 2000 and September 2015. The search strategy was based on four key elements and their synonyms: (a) sedentary behaviour (b) correlates (c) types of sedentary behaviours (d) types of correlates. Articles were included if information relating to sedentary behaviour in adults (18-65 years) was reported. Studies on samples selected by disease were excluded. The full protocol is available from PROSPERO (PROSPERO 2014:CRD42014009823). Results: 74 original studies were identified out of 4041: 71 observational, two qualitative and one experimental study. Sedentary behaviour was primarily measured as self-reported screen leisure time and total sitting time. In 15 studies, objectively measured total sedentary time was reported: accelerometry (n = 14) and heart rate (n = 1). Individual level factors such as age, physical activity levels, body mass index, socio-economic status and mood were all significantly correlated with sedentariness. A trend towards increased amounts of leisure screen time was identified in those married or cohabiting while having children resulted in less total sitting time. Several environmental correlates were identified including proximity of green space, neighbourhood walkability and safety and weather. Conclusions: Results provide further evidence relating to several already recognised individual level factors and preliminary evidence relating to social and environmental factors that should be further investigated. Most studies relied upon cross-sectional design limiting causal inference and the heterogeneity of the sedentary measures prevented direct comparison of findings. Future research necessitates longitudinal study designs, exploration of policy-related factors, further exploration of environmental factors, analysis of inter-relationships between identified factors and better classification of sedentary behaviour domains

The control and maintenance of desired flow patterns in bends of different orientations

Multiphase flows are common in industrial settings and bends in pipe lines cannot be avoided due to space limitations. Gas-liquid two phase flows could form material discontinuities that could have adverse effect on productivity and the pipe network due to sudden variations resulting due to the rapid momentum flux variations at fittings such as bends. Research into gas-liquid flow and bends can be motivated by the effect of the bend on the flow downstream of it which could alter the flow pattern occurring and the performance of downstream equipment. Alternatively, the interest might come from what occurs in the bend itself, there could be dryout of the film on the walls and consequent damage to the heat transfer equipment. Here we present measurements made with a number of accurate and fast responding sensors on three cases, two on the effect of the bend and one considering effects in the bend. The results show that the flow transformations occur in two phase flows depending on the orientation of the bend and the change could be captured using fast sweeping measurement techniques. We present the evidence of effectiveness of several types of measurement techniques that could fit into various combinations of phases. The results, point to how to achieve certain flow patterns. Also recommendations are provided regarding the position of any sensor installed to determine flow pattern

Untersuchungen zur Sauerstoffkorrosion von Eisen und Eisenbasislegierungen

In oxygen corrosion of iron materials, a top layer is formed, where it depends appreciably on the conditions of production, composition, morphology and topology of the material, whether this layer protects against further corrosion. It was therefore a central problem in this work to examine the kinetics of the anodic and cathodic part processes of corrosion depending on the formation of this top layer. Due to the special features regarding the formation of a top layer of low alloy construction and corrosion support steels (KTS) and iron - 8% aluminium alloy (FeAl8), their corrosion behaviour in comparison with very pure iron is of interest. While with KTS, in consequence of active corrosion, massive battery layers are formed on the surface FeAl8 is covered from the start with a thin protective layer of passivated character. Information on the corrosion and passivation of the above materials is to be derived by means of rest potential measurements and drawing potentiodynamic current density/potential curves. (orig.)Bei der Sauerstoffkorrosion von Eisenwerkstoffen erfolgt eine Deckschichtbildung, wobei es wesentlich von den Bildungsbedingungen, Zusammensetzung, Morphologie und Topologie des Materials abhaengt, ob diese Schicht vor weiterer Korrosion schuetzt. Deshalb war es in der vorliegenden Arbeit ein zentrales Problem, die Kinetik der anodischen und kathodischen Teilprozesse der Korrosion in Abhaengigkeit von dieser Deckschichtbildung zu untersuchen. Aufgrund von Besonderheiten bezueglich der Deckschichtbildung bei niedriglegierten Bau- und Korrosionstraegen Staehlen (KTS) sowie Eisen-8% Aluminium-Legierung (FeAl8) interessiert deren Korrosionsverhalten im Vergleich zum Reinsteisen. Waehrend bei den KTS als Folge aktiver Korrosion massive Barriereschichten auf der Oberflaeche gebildet werden, ist das FeAl8 von vornherein mit einer duennen Schutzschicht passivierenden Charakters ueberzogen. Mittels Ruhepotentialmessungen und der Aufnahme potentiodynamischer Stromdichte-Potential-Kurven (SPK) sollten Aussagen zur Korrosion und Passivierung der o.g. Werkstoffe abgeleitet werden. (orig.)SIGLEAvailable from TIB Hannover: H93B3873 / FIZ - Fachinformationszzentrum Karlsruhe / TIB - Technische InformationsbibliothekDEGerman

The control and maintenance of desired flow patterns in bends of different orientations

Research into gas-liquid flow and bends can be motivated by the effect of the bend on the flow downstream of it which could alter the flow pattern occurring and the performance of downstream equipment. Alternatively, the interest might come from what occurs in the bend itself, there could be dryout of the film on the walls and consequent damage to the heat transfer equipment. Here we present measurements made with a number of accurate and fast responding sensors on three cases, two on the effect of the bend and one considering effects in the bend. The results, point to how to achieve certain flow patterns. Also recommendations are provided regarding the position of any sensor installed to determine flow pattern

Effect of severe dietary restriction on growth and slaughter characteristics of non-selected growing rabbits

peer reviewedThis work was carried out to study the effects of dietary restriction by time-limited access to the feeders on growth performance and carcass characteristics of Algerian local growing rabbit. Forty-four weaned rabbits, 32-35 days old, were randomly divided into 2 groups, the control group (C) fed ad-libitum throughout the fattening period and the group with restricted access to the feeders (R). During the five post-weaning weeks, the weekly (7 days) feeding program of the R group consisted on a restriction access time (3h) to the feeders during the first 5 days and ad libitum feed distribution for the two remaining days of the week. Two weeks before slaughter (10 to 12 weeks of age), the rabbits from the R group were re-fed ad libitum. Live weight in R group was lower (p0.05). The feed intake index at the end of fattening was significantly higher (p=0.001) in control rabbits (4.15 vs 3.85). Carcass yield was similar (68.07% vs. 65.70%) in the two groups while peri-renal fat weight was higher (p=0.002) in control rabbits (27.17 vs 13.67g). The results of the present study indicate the economic interest of feed restriction strategy by limiting access to feeders, what should be promoted and made widely known to rabbit farmers

Effect of dietary protein level on milk production of Algerian local rabbit does

peer reviewedFifty-two Algerian local rabbit does were used to study the effect of dietary protein content during two reproductive cycles on milk yield and lactation curves. Three experimental groups were constituted by 17/18 does that received different isoenergetic diets with 2600 kcal Digestible Energy (DE)/kg during reproduction (gestation and lactation). Diets differed in their protein (CP) content (15%, 17%, and 19% for diets L (light), M (medium) and H (high), respectively) and were fed ad libitum. The use of high protein diets did not affect rabbits does weight at parturition, daily feed intake and total litter size at birth (P>0.05). In contrast, the daily protein intake was significantly higher in rabbits fed H diet (P0.05). However, lactation peak occurs at different times (16th, 20th and 20th day PP at first lactation and 15th, 17th and 20th days PP at second lactation for L, M and H groups respectively), without significant effect of parity. In our experimental conditions, the change in protein level had no effect on milk yield but with increasing CP, lactation peak tended to occur later