Fracture Resistance of computer aided endo-crowns versus conventional endo-supported computer aided full crowns

The purpose of the present study was to investigate the fracture resistance of computer aided endo-crowns versus conventional core-supported computer aided full crowns. Ninety human teeth were collected, 30 for each type (maxillary central incisors, maxillary 1st premolars and maxillary 1st molars). Specimens were divided into 3 groups (n=10) according to restoration used: 1) PC: Post-core and crown; 2) NC: Nayyar core and crown and 3) EC: Endo-crown. Each group was further subdivided into 3 subgroups according to the tooth used: I (Incisor), P (Premolar) and M (Molar). For group PC: Fiber post (Radix, Dentsply Maillefer) were cemented using resin cement (Calibra Dual Cure, Denstply Detrey GmbH). For group NC: 3 mm of gutta percha of every canal was removed. For groups PC and NC, after etching and bonding of root-face, transparent core former (Coltène/ Whaledent) was filled with SDR (Smart Dentine Replacement, Dentsply Detrey GmbH) and inverted onto root-face and cured. All specimens were individually scanned and thermocycled for 1000 cycles then submitted to compression test using universal testing machine (Instron 8874; Instron Corp.) Fracture was confirmed by sudden drop in load readings. Subgroup IPC scored the highest mean among group I and subgroup PNC scored the highest mean among group P. One-Way ANOVA detected significant differences among groups I and M with p\u3c 0.05 in I and M groups. Regarding P group, P-value was \u3e 0.05 indicating no significant differences among group. Endocrown showed the highest fracture resistance means in molars, while Nayyar core and crown showed the highest fracture resistance means in premolars. However, post-core and crown revealed the highest fracture resistance means in incisors

Economic development in urban Nigeria

The research in this report aims to contribute to a better understanding of urban economic development in the cities and towns in Nigeria. It considers: ■ The overall composition of the national, regional and local economies in the formal and informal sectors, and the broad emerging spatial patterns of agglomeration. ■ Economic performance in the formal or informal manufacturing, or service sectors, and the contribution of urban infrastructures to productivity enhancement. ■ Economic development policy and the institutional environment at the federal, state and local levels, and within national development programming

EVALUATION OF AN EXPERIMENTAL SCREW-RETAINED RETRIEVABLE CROWN VERSUS CONVENTIONAL CROWN DESIGN

Statement of problem: Removing cemented crowns is usually a complicated procedure that may lead to irreversible damage to the tooth/crown and mostly necessitate remake of crown with added effort for both patient and clinician. Purpose: This in-vitro study evaluated an experimental two-component, screw-retained retrievable crown design in comparison to the conventional design. Materials and methods: A total of 120 extracted maxillary 2nd premolars received root canal treatment and were divided into two groups (n=60 each) according to the crown design they will receive. Gp CC received a threaded modified post, a composite core and a metal coping, while Gp RC received a two-component retrievable crown design. Fracture resistance was assessed by a 90 degrees vertical load to the center of the occlusal surface, using universal testing machine, under a constant crosshead speed of 0.5 mm/min until failure. Microleakage was assessed by placing specimens in methylene blue dye for 12 hours, sectioning the teeth longitudinally, and then examining the sectioned samples under stereomicroscope. Retrievability testing was conducted by 5 prosthodontists who attempted to uncover and unscrew the posts. Data were statistically evaluated using computer software (SPSS version 17; SPSS Inc.). Results: No significant difference between the 2 designs tested regarding microleakage tests (P=.34) whereas the experimental design, was significantly more resistant to fracture and more retrievable than the conventional one (P\u3e.5). Conclusions: The proposed retrievable crown design showed promising results and may be considered as an option to substitute the conventional design. Further studies are needed to confirm that

Preoperative evaluation of patients with ovarian masses using the risk of malignancy index 4 model

Objective: To evaluate the performance of the RMI 4 in discriminating benign from malignant ovarian masses. Study Design: Cross-sectional study. Setting: Assiut Women Health Hospital- Egypt. Materials and methods: This was an observational cross-sectional study involving 91 patients at Women\u27s Health Hospital, Assiut University, Egypt during the period between January, 2016 and January, 2017. Women with ovarian masses planned for surgical management were recruited from the outpatient gynecology clinic of the hospital. Risk of malignancy index (RMI 4) was calculated for all study participants. Biopsies obtained from the ovarian masses after surgical intervention were sent to the pathology lab for histopathological examination. The histopathologic diagnosis of the ovarian masses is considered the gold standard for diagnosis. Results: The mean age of patients in the benign group was 34.83±16.28 years versus 43.43±15.91 in the malignant group. There were 12 postmenopausal patients (15.6%) in the benign group versus 4 postmenopausal patients (28.6%) in the malignant group (p=0.0001). An ultrasound score of 4 was recorded in 85.7% of patients in the malignant group versus only 6.5% in the benign group (p=0.0001). Additionally, tumor size ≥ 7 cm was observed in 85.7% of patients in the malignant group versus 55.8% in the benign group (p=0.0001). The mean value of CA-125 was significantly higher in malignant group than the benign group (142.09±41.50 versus 54.51±32.86 ml, respectively) with p=0.01. RMI 4 had a sensitivity of 75%, specificity of 97.3%, PPV of 85.7%, NPV of 94.8 % and an overall accuracy of 93.4%. Conclusions: RMI 4 is a simple and reliable tool in the primary evaluation of patients with ovarian masses. It can further be used to discriminate benign from malignant ovarian masses with high sensitivity and accuracy

The Effect of use of Vaginal Lactobacillus Rhamnosus for Prevention of Recurrence of Vulvovaginal Candidiasis: A randomized controlled trial

Objectives:The study aims to investigate the role of vaginal administration of Lactobacillus Rhamnosus after vaginal miconazole for prevention of recurrence among women with vulvovaginal candidiasis (VVC).Materials and Methods:A randomized clinical study was done in Women Health Hospital–Assiut University–Egypt. All women presented with symptoms suggestive of VVC to the clinic had been examined and approached for participation. Eligible participants were randomly assigned to one of three groups: Group (A) received lactobacillus containing vaginal capsules daily for one week postmenstrual. Group (B) received vaginal miconazole 400 mg once daily for 3days at bedtime postmenstrual. Group (C) received vaginal miconazole 400 mg once daily for 3 days at bedtime postmenstrual followed by lactobacillus containing vaginal capsules twice daily for one week. The primary outcome was to study the rate of recurrence of symptoms after 1, 3, 6 months of treatment. Results:During the study period, 202 participants with recurrent VVC were approached to participate in this study. No significant differences were found between the three study groups with regards patients’ age, residence, parity. After 1 month, symptoms of VVC recurred in 68.4%, 24.6% and 17.2% of women in group A, B, C consecutively. The recurrence rate increases after 3 months to become 87.5%, 60% and 33.3% consecutively in the three groups. Finally after 6 months, 94.4%, 88.7%, and 44.6% of women in group A, B, C consecutively suffered from RVVC. The recurrence rate is lower in group C (combination group) with statistically significant difference (p=0.0001).Conclusions:Vaginal administration of Lactobacillus Rhamnosus twice daily for 1 week after vaginal miconazole leads to vaginal colonization and associated at 6 months follow up with decrease the recurrence rate of VVC

Sect and House in Syria: History, Architecture, and Bayt Amongst the Druze in Jaramana

This paper explores the connections between the architecture and materiality of houses and the social idiom of bayt (house, family). The ethnographic exploration is located in the Druze village of Jaramana, on the outskirts of the Syrian capital Damascus. It traces the histories, genealogies, and politics of two families, bayt Abud-Haddad and bayt Ouward, through their houses. By exploring the two families and the architecture of their houses, this paper provides a detailed ethnographic account of historical change in modern Syria, internal diversity, and stratification within the intimate social fabric of the Druze neighbourhood at a time of war, and contributes a relational approach to the anthropological understanding of houses

Substrate-transferred GaAs/AlGaAs crystalline coatings for gravitational-wave detectors: A review of the state of the art

In this Perspective we summarize the status of technological development for large-area and low-noise substrate-transferred GaAs/AlGaAs (AlGaAs) crystalline coatings for interferometric gravitational-wave (GW) detectors. These topics were originally presented in a workshop{\dag} bringing together members of the GW community from the laser interferometer gravitational-wave observatory (LIGO), Virgo, and KAGRA collaborations, along with scientists from the precision optical metrology community, and industry partners with extensive expertise in the manufacturing of said coatings. AlGaAs-based crystalline coatings present the possibility of GW observatories having significantly greater range than current systems employing ion-beam sputtered mirrors. Given the low thermal noise of AlGaAs at room temperature, GW detectors could realize these significant sensitivity gains, while potentially avoiding cryogenic operation. However, the development of large-area AlGaAs coatings presents unique challenges. Herein, we describe recent research and development efforts relevant to crystalline coatings, covering characterization efforts on novel noise processes, as well as optical metrology on large-area (~10 cm diameter) mirrors. We further explore options to expand the maximum coating diameter to 20 cm and beyond, forging a path to produce low-noise AlGaAs mirrors amenable to future GW detector upgrades, while noting the unique requirements and prospective experimental testbeds for these novel materials.Comment: 13pages, 3 figure

An 8-mm diameter fibre robot positioner for massive spectroscopy surveys

This article has been accepted for publication in Monthly Notices of Royal Astronomical Society © 2015 The Authors. Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reservedMassive spectroscopic survey are becoming trendy in astrophysics and cosmology, as they can address new fundamental knowledge such as understanding the formation of the Milky Way and probing the nature of the mysterious dark energy. To enable massive spectroscopic surveys, new technology has been developed to place thousands of optical fibres at a given position on a focal plane. This technology needs to be: (1) accurate, with micrometer positional accuracy; (2) fast to minimize overhead; (3) robust to minimize failure; and (4) low cost. In this paper, we present the development, properties, and performance of a new single 8-mm in diameter fibre positioner robot, using two 4-mm DC-brushless gearmotors, that allows us to achieve accuracies up to 0.07 arcsec (5 μm). This device has been developed in the context of the Dark Energy Spectroscopic InstrumentWe acknowledge support from the Spanish MICINNs Consolider-Ingenio 2010 Program me under grant MultiDark CSD2009-00064, HEPHACOS S2009/ESP-1473, and MINECO Centro de Excelencia Severo Ochoa Programme under grant SEV-2012-0249. We also thank the support from a CSIC-AVS contract through MICINN grant AYA2010-21231-C02- 01, and CDTI grant IDC-20101033; and support from the Spanish MINECO research grants AYA2012-31101 and FPA2012-34694. JPK, PH and LM acknowledge support from the ERC advanced grant LIDA and from an SNF Interdisciplinary grant