Widely tunable linear-cavity multiwavelength fiber laser with distributed Brillouin scattering.

We demonstrate a multiple wavelength Brillouin/erbium fiber laser in a linear cavity configuration. The laser cavity is made up of a fiber loop mirror on one end of the resonator and a virtual mirror generated from the distributed stimulated Brillouin scattering effect on the other end. Due to the weak reflectivity provided by the virtual mirror, self-lasing cavity modes are completely suppressed from the laser cavity. At Brillouin pump and 1480-nm pump powers of 2 and 130 mW, respectively, 11 channels of the demonstrated laser with an average total power of 7.13 dBm can freely be tuned over a span of 37-nm wavelength from 1530 to 1567 nm

Extraction of the pulse width and pulse repetition period of linear FM radar signal using time-frequency analysis

A common technique used by military to realize low probability of intercept (LPI) is linear frequency modulation (LFM) in the field of electronic intelligence (ELINT). This paper estimates the pulse width (PW) and the pulse repetition period (PRP) of LFM signal using instantaneous powers. The instantaneous powers were obtained either using time-marginal or power maxima approximated from a modified version of the Wigner-Ville distribution (WVD). The instantaneous power was also gotten directly from the signal by multiplication with its conjugate. Measurement was then carried out when the instantaneous power is ‘ON’ (the PW) and when it is ‘OFF’ (the PRP) at carefully selected thresholds. Thereafter, the mWVD-based algorithm was tested in the presence of additive white Gaussian noise (AWGN) at various signal-to-noise ratios. Results obtained during the test showed that the time marginal method emerged the best with minimum signal-to-noise ratio (SNR) of -5dB followed closely by the direct method with minimum SNR of -1dB at different thresholds. The results show that the proposed algorithm based on this modified WVD can be deployed in the practical field to determine radar’s performance and functio

Single-wavelength ring-cavity Brillouin-Raman fiber laser

We experimentally demonstrate a ring-cavity, single-wavelength Brillouin-Raman fiber laser. An 11-km long dispersion compensating fiber was used as the medium for the Raman as well as the Brillouin amplification. A threshold power of 27 mW was recorded to get the Brillouin-Stokes line at 1455 nm pump wavelength. At an injected Brillouin pump power of 2 mW, while the Raman pump unit was fixed at a power of 296 mW, the single-wavelength Brillouin-Raman fiber laser can be tuned from 1520 nm to 1580 nm without any self-lasing cavity modes in the laser system. The Brillouin- Stokes line has a 3-dB power fluctuation within 26 nm from 1542 nm to 1568 nm

Effect of output coupling ratio on the performance of ring-cavity Brillouin fiber laser

We present a single-wavelength Brillouin fiber laser utilizing a ring-cavity configuration. Performances and characteristics of the laser system have been investigated at different output coupling ratios. The optimum output power of the system stood at 7.3 mW, which was obtained at 90% output coupling ratio. A low Brillouin threshold power of 0.9 mW was obtained at 10% output coupling ratio when the Brillouin pump was set at its maximum power of 24 mW

Seamless tuning range based-on available gain bandwidth in multiwavelength Brillouin fiber laser.

We experimentally demonstrate a simple widely tunable multiwavelength Brillouin/Erbium fiber laser that can be tuned over the entire C-band, thereby greatly improving the tuning range limitation faced by the previous Brillouin-erbium fiber laser architectures. Tuning range of 39 nm from 1527 nm to 1566 nm, which is only limited by the amplification bandwidth of the erbium gain was successfully achieved. At Brillouin pump wavelength of 1550 nm and 1480 nm laser pump and Brillouin pump powers of 130 mW and 2 mW respectively, all the generated output channels have peak power above 0 dBm, with the first output channel having a peak power of 8.52 dBm. The experimental set up that consists of only 4 optical components, is simple, devoid of the complex structure employed previously to enhance the tunability and feedback mechanism normally associated with multiwavelength Brillouin-erbium fiber laser sources. The generated output channels are stable, rigidly separated by 10 GHz (0.08 nm)

Flattening effect of four wave mixing on multiwavelength Brillouin-erbium fiber laser.

A multiwavelength Brillouin-erbium fiber laser with enhanced output uniformity is demonstrated and its performance with and without the assistance of four wave mixing (FWM) is compared. The presence of FWM effect is proven by the generation of anti-Stokes wave and higher-order Stokes wave. This scheme is successful in flattening the multiwavelength output. At Brillouin pump wavelength of 1,550 nm, between the first and the last output channel, peak power differences of 4.59 and 8.32 dB are recorded for the scheme with and without the assistance of FWM, respectively. This represents 3.73 dB improvement in the multiwavelength output power uniformity

Multiwavelength L-band fiber laser with bismuth-oxide EDF and photonic crystal fiber.

A multiwavelength laser comb using a bismuth-based erbium-doped fiber and 50 m photonic crystal fiber is demonstrated in a ring cavity configuration. The fiber laser is solely pumped by a single 1455 nm Raman pump laser to exploit its higher power delivery compared to that of a single-mode laser diode pump. At 264 mW Raman pump power and 1 mW Brillouin pump power, 38 output channels in the L-band have been realized with an optical signal-to-noise ratio above 15 dB and a Stokes line spacing of 0.08 nm. The laser exhibits a tuning range of 12 nm and produces stable Stokes lines across the tuning range between Brillouin pump wavelengths of 1603 nm and 1615 nm

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries