Late Cenozoic Structure and Tectonics of the Northern Mojave Desert

In the Fort Irwin region of the northern Mojave desert, late Cenozoic east striking sinistral faults predominate over northwest striking dextral faults of the same age. Kinematic indicators and offset marker units indicate dominantly sinistral strike slip on the east striking portions of the faults and sinistral-thrust slip on northwest striking, moderately dipping segments at the east ends of the blocks. Crustal blocks ∼7–10 km wide by ∼50 km long are bounded by complex fault zones up to 2 km wide at the edges and ends of each block. Faulting initiated after ∼11 Ma, and Quaternary deposits are faulted and folded. We document a minimum of 13 km cumulative sinistral offset in a north-south transect from south of the Bicycle Lake fault to north of the Drinkwater Lake fault. Paleomagnetic results from 50 sites reveal two direction groups in early and middle Miocene rocks. The north-to-northwest declinations of the first group are close to the middle Miocene reference pole. However, rock magnetic studies suggest that both primary and remagnetized directions are present in this group. The northeast declinations of the second group are interpreted as primary and 63.5° ± 7.6° clockwise from the reference pole and suggest net post middle Miocene clockwise rotation of several of the east trending blocks in the northeast Mojave domain. The Jurassic Independence Dike Swarm in Fort Irwin may be rotated 25–80° clockwise relative to the swarm north of the Garlock fault, thus supporting the inference of clockwise rotation. Using a simple-shear model that combines sinistral slip and clockwise rotation of elongate crustal blocks, we predict ∼23° clockwise rotation using the observed fault slip, or one-third that inferred from the paleomagnetic results. The discrepancy between slip and rotation may reflect clockwise bending at the ends of fault blocks, where most of our paleomagnetic sites are located. However, at least 25°–40° of clockwise tectonic rotation is consistent with the observed slip on faults within the domain plus possible “rigid-body” rotation of the region evidenced by clockwise bending of northwest striking domain-bounding faults. Our estimates of sinistral shear and clockwise rotation suggest that approximately half of the 65 km of dextral shear in the Eastern California Shear Zone over the last 10 m.y. occurred within the northeast Mojave Domain. The remainder must be accommodated in adjacent structural domains, e.g., east of the Avawatz Mountains and west of the Goldstone Lake fault. Supporting Appendices 1 and 2 are available on diskette or via Anonymous FTP from kosmos.agu.org, directory APEND (Username -- anonymous, Password = guest). Diskette may be ordered from American Geophysical Union, 2000 Florida Avenue, N.W, Washington, DC 20009 or by phone at 800-966-2481; $15.00. Payment must accompany order

Cretaceous and Tertiary extension throughout the Ross Sea, Antarctica

Marine geophysical data from the deep sea adjacent to the Ross Sea, Antarctica suggest that 170 km of extension occurred between East and West Antarctica from 46 to 21 Ma. The Northern and Victoria Land Basins in the western Ross Sea adjacent to the Transantarctic Mountains accommodated 95 km of this extension. Several kilometers of Oligocene sediments are found in the Central Trough and Eastern Basin in the eastern Ross Sea. Subsidence modeling accounts for these accumulations with about 40 km of extension in each basin centered on 35 Ma; therefore Ross Sea-wide Tertiary extension was comparable to extension in the deep-sea system. The early Tertiary geometry was of one oceanic rift that branched into at least three rifts in the continental lithosphere. This pattern is likely due to the contrast of physical properties and thermal state between the two different lithospheres at the continent-ocean boundary

Young off-axis volcanism along the ultraslow-spreading Southwest Indian Ridge

Author Posting. © The Authors, 2010. This is the author's version of the work. It is posted here by permission of Nature Publishing Group for personal use, not for redistribution. The definitive version was published in Nature Geoscience 3 (2010): 286-292, doi:10.1038/ngeo824.Mid-ocean ridge crustal accretion occurs continuously at all spreading rates through a combination of magmatic and tectonic processes. Fast to slow spreading ridges are largely built by adding magma to narrowly focused neovolcanic zones. In contrast, ultraslow spreading ridge construction significantly relies on tectonic accretion, which is characterized by thin volcanic crust, emplacement of mantle peridotite directly to the seafloor, and unique seafloor fabrics with variable segmentation patterns. While advances in remote imaging have enhanced our observational understanding of crustal accretion at all spreading rates, temporal information is required in order to quantitatively understand mid-ocean ridge construction. However, temporal information does not exist for ultraslow spreading environments. Here, we utilize U-series eruption ages to investigate crustal accretion at an ultraslow spreading ridge for the first time. Unexpectedly young eruption ages throughout the Southwest Indian ridge rift valley indicate that neovolcanic activity is not confined to the spreading axis, and that magmatic crustal accretion occurs over a wider zone than at faster spreading ridges. These observations not only suggest that crustal accretion at ultraslow spreading ridges is distinct from faster spreading ridges, but also that the magma transport mechanisms may differ as a function of spreading rate.This work was supported by the following NSF grants: NSF-OCE 0137325; NSF-OCE 060383800; and NSF-OCE 062705300

Antarctic ice-sheet sensitivity to obliquity forcing enhanced through ocean connections

Deep sea geological records indicate that Antarctic ice-sheet growth and decay is strongly influenced by the Earth's astronomical variations (known as Milankovitch cycles), and that the frequency of the glacial-interglacial cycles changes through time. Here we examine the emergence of a strong obliquity (axial tilt) control on Antarctic ice-sheet evolution during the Miocene by correlating the Antarctic margin geological records from 34 to 5 million years ago with a measure of obliquity sensitivity that compares the variance in deep sea sediment core oxygen-isotope data at obliquity timescales with variance of the calculated obliquity forcing. Our analysis reveals distinct phases of ice-sheet evolution and suggests the sensitivity to obliquity forcing increases when ice-sheet margins extend into marine environments. We propose that this occurs because obliquity-driven changes in the meridional temperature gradient affect the position and strength of the circum-Antarctic easterly flow and enhance (or reduce) ocean heat transport across the Antarctic continental margin. The influence of obliquity-driven changes in ocean dynamics is amplified when marine ice sheets are extensive, and sea ice is limited. Our reconstruction of the Antarctic ice-sheet history suggests that if sea-ice cover decreases in the coming decades, ocean-driven melting at the ice-sheet margin will be amplified.Published132-1371A. Geomagnetismo e Paleomagnetismo4A. Oceanografia e clima5A. Ricerche polari e paleoclimaJCR Journa

miR-198 Inhibits HIV-1 Gene Expression and Replication in Monocytes and Its Mechanism of Action Appears To Involve Repression of Cyclin T1

Cyclin T1 is a regulatory subunit of a general RNA polymerase II elongation factor known as P-TEFb. Cyclin T1 is also required for Tat transactivation of HIV-1 LTR-directed gene expression. Translation of Cyclin T1 mRNA has been shown to be repressed in human monocytes, and this repression is relieved when cells differentiate to macrophages. We identified miR-198 as a microRNA (miRNA) that is strongly down-regulated when monocytes are induced to differentiate. Ectopic expression of miR-198 in tissue culture cells reduced Cyclin T1 protein expression, and plasmid reporter assays verified miR-198 target sequences in the 3′ untranslated region (3′UTR) of Cyclin T1 mRNA. Cyclin T1 protein levels increased when an inhibitor of miR-198 was transfected into primary monocytes, and overexpression of miR-198 in primary monocytes repressed the normal up-regulation of Cyclin T1 during differentiation. Expression of an HIV-1 proviral plasmid and HIV-1 replication were repressed in a monocytic cell line upon overexpression of miR-198. Our data indicate that miR-198 functions to restrict HIV-1 replication in monocytes, and its mechanism of action appears to involve repression of Cyclin T1 expression

Bedmap2: improved ice bed, surface and thickness datasets for Antarctica

We present Bedmap2, a new suite of gridded products describing surface elevation, ice-thickness and the seafloor and subglacial bed elevation of the Antarctic south of 60 S. We derived these products using data from a variety of sources, including many substantial surveys completed since the original Bedmap compilation (Bedmap1) in 2001. In particular, the Bedmap2 ice thickness grid is made from 25 million measurements, over two orders of magnitude more than were used in Bedmap1. In most parts of Antarctica the subglacial landscape is visible in much greater detail than was previously available and the improved datacoverage has in many areas revealed the full scale of mountain ranges, valleys, basins and troughs, only fragments of which were previously indicated in local surveys. The derived statistics for Bedmap2 show that the volume of ice contained in the Antarctic ice sheet (27 million km3) and its potential contribution to sea-level rise (58 m) are similar to those of Bedmap1, but the mean thickness of the ice sheet is 4.6% greater, the mean depth of the bed beneath the grounded ice sheet is 72m lower and the area of ice sheet grounded on bed below sea level is increased by 10 %. The Bedmap2 compilation highlights several areas beneath the ice sheet where the bed elevation is substantially lower than the deepest bed indicated by Bedmap1. These products, along with grids of data coverage and uncertainty, provide new opportunities for detailed modelling of the past and future evolution of the Antarctic ice sheets

Bedmap2: improved ice bed, surface and thickness datasets for Antarctica

We present Bedmap2, a new suite of gridded products describing surface elevation, ice-thickness and the seafloor and subglacial bed elevation of the Antarctic south of 60° S. We derived these products using data from a variety of sources, including many substantial surveys completed since the original Bedmap compilation (Bedmap1) in 2001. In particular, the Bedmap2 ice thickness grid is made from 25 million measurements, over two orders of magnitude more than were used in Bedmap1. In most parts of Antarctica the subglacial landscape is visible in much greater detail than was previously available and the improved data-coverage has in many areas revealed the full scale of mountain ranges, valleys, basins and troughs, only fragments of which were previously indicated in local surveys. The derived statistics for Bedmap2 show that the volume of ice contained in the Antarctic ice sheet (27 million km3) and its potential contribution to sea-level rise (58 m) are similar to those of Bedmap1, but the mean thickness of the ice sheet is 4.6% greater, the mean depth of the bed beneath the grounded ice sheet is 72 m lower and the area of ice sheet grounded on bed below sea level is increased by 10%. The Bedmap2 compilation highlights several areas beneath the ice sheet where the bed elevation is substantially lower than the deepest bed indicated by Bedmap1. These products, along with grids of data coverage and uncertainty, provide new opportunities for detailed modelling of the past and future evolution of the Antarctic ice sheets

Bedmap2: improved ice bed, surface and thickness datasets for Antarctica

We present Bedmap2, a new suite of gridded products describing surface elevation, ice-thickness and the seafloor and subglacial bed elevation of the Antarctic south of 60° S. We derived these products using data from a variety of sources, including many substantial surveys completed since the original Bedmap compilation (Bedmap1) in 2001. In particular, the Bedmap2 ice thickness grid is made from 25 million measurements, over two orders of magnitude more than were used in Bedmap1. In most parts of Antarctica the subglacial landscape is visible in much greater detail than was previously available and the improved data-coverage has in many areas revealed the full scale of mountain ranges, valleys, basins and troughs, only fragments of which were previously indicated in local surveys. The derived statistics for Bedmap2 show that the volume of ice contained in the Antarctic ice sheet (27 million km3) and its potential contribution to sea-level rise (58 m) are similar to those of Bedmap1, but the mean thickness of the ice sheet is 4.6% greater, the mean depth of the bed beneath the grounded ice sheet is 72 m lower and the area of ice sheet grounded on bed below sea level is increased by 10%. The Bedmap2 compilation highlights several areas beneath the ice sheet where the bed elevation is substantially lower than the deepest bed indicated by Bedmap1. These products, along with grids of data coverage and uncertainty, provide new opportunities for detailed modelling of the past and future evolution of the Antarctic ice sheets

Antarctic Bedmap data: Findable, Accessible, Interoperable, and Reusable (FAIR) sharing of 60 years of ice bed, surface, and thickness data

One of the key components of this research has been the mapping of Antarctic bed topography and ice thickness parameters that are crucial for modelling ice flow and hence for predicting future ice loss and the ensuing sea level rise. Supported by the Scientific Committee on Antarctic Research (SCAR), the Bedmap3 Action Group aims not only to produce new gridded maps of ice thickness and bed topography for the international scientific community, but also to standardize and make available all the geophysical survey data points used in producing the Bedmap gridded products. Here, we document the survey data used in the latest iteration, Bedmap3, incorporating and adding to all of the datasets previously used for Bedmap1 and Bedmap2, including ice bed, surface and thickness point data from all Antarctic geophysical campaigns since the 1950s. More specifically, we describe the processes used to standardize and make these and future surveys and gridded datasets accessible under the Findable, Accessible, Interoperable, and Reusable (FAIR) data principles. With the goals of making the gridding process reproducible and allowing scientists to re-use the data freely for their own analysis, we introduce the new SCAR Bedmap Data Portal (https://bedmap.scar.org, last access: 1 March 2023) created to provide unprecedented open access to these important datasets through a web-map interface. We believe that this data release will be a valuable asset to Antarctic research and will greatly extend the life cycle of the data held within it. Data are available from the UK Polar Data Centre: https://data.bas.ac.uk (last access: 5 May 2023​​​​​​​). See the Data availability section for the complete list of datasets.</p