Plasma Vitamin E and Blood Selenium Concentrations in Norwegian Dairy Cows: Regional Differences and Relations to Feeding and Health

Plasma α-tocopherol (vit E) and blood selenium (Se) concentrations in February were determined in samples from 314 dairy cows in Norway, selected to provide a representative subset of the Norwegian dairy cow population. Each sample was followed by a questionnaire with information about feeding of the cow at the time of sampling. The results were correlated to herd data and to calving and health data for each cow from the Norwegian Dairy Herd Recording System and the Norwegian Cattle Health Recording System. The mean concentrations were 6.9 μg vit E per ml plasma and 0.16 μg Se per g blood. Both levels were highest in mid lactation. Plasma vit E varied with the amount of silage fed to the cow, while blood Se varied with the amount of concentrates and mineral supplements, and with geographical region. No differences in vit E or Se levels were found between cows with recorded treatments for mastitis, parturient paresis or reproductive disorders in the lactation during or immediately prior to sampling, and those without such treatments. For ketosis, a small difference in blood Se was found between the groups with or without recorded treatments. It is concluded that winter-fed lactating cows in Norway had an adequate plasma level of vit E and a marginal-to-adequate level of Se

Premium Tax Credits and Federal Health Insurance Exchanges: Questions and Answers

Legal challenges that may have a substantial impact on the implementation and operation of the Patient Protection and Affordable Care Act (ACA) concern whether premium tax credits are available for millions of individuals participating in federally administered health insurance exchanges. The Supreme Court has decided to weigh in on this issue in King v. Burwell. This report provides background on provisions of ACA relevant to this issue. It then answers questions concerning the legal challenges and potential implications of the Court's decision in King

A new estimation of the recent tropospheric molecular hydrogen budget using atmospheric observations and variational inversion

This paper presents an analysis of the recent tropospheric molecular hydrogen (H2) budget with a particular focus on soil uptake and European surface emissions. A variational inversion scheme is combined with observations from the RAMCES and EUROHYDROS atmospheric networks, which include continuous measurements performed between mid-2006 and mid-2009. Net H2 surface flux, then deposition velocity and surface emissions and finally, deposition velocity, biomass burning, anthropogenic and N2 fixation-related emissions were simultaneously inverted in several scenarios. These scenarios have focused on the sensibility of the soil uptake value to different spatio-temporal distributions. The range of variations of these diverse inversion sets generate an estimate of the uncertainty for each term of the H2 budget. The net H2 flux per region (High Northern Hemisphere, Tropics and High Southern Hemisphere) varies between −8 and +8 Tg yr−1. The best inversion in terms of fit to the observations combines updated prior surface emissions and a soil deposition velocity map that is based on bottom-up and top-down estimations. Our estimate of global H2 soil uptake is −59±9 Tg yr−1. Forty per cent of this uptake is located in the High Northern Hemisphere and 55% is located in the Tropics. In terms of surface emissions, seasonality is mainly driven by biomass burning emissions. The inferred European anthropogenic emissions are consistent with independent H2 emissions estimated using a H2/CO mass ratio of 0.034 and CO emissions within the range of their respective uncertainties. Additional constraints, such as isotopic measurements would be needed to infer a more robust partition of H2 sources and sinks

Arctic smoke ? record high air pollution levels in the European Arctic due to agricultural fires in Eastern Europe

International audienceIn spring 2006, the European Arctic was abnormally warm, setting new historical temperature records. During this warm period, smoke from agricultural fires in Eastern Europe intruded into the European Arctic and caused the most severe air pollution episodes ever recorded there. This paper confirms that biomass burning (BB) was indeed the source of the observed air pollution, studies the transport of the smoke into the Arctic, and presents an overview of the observations taken during the episode. Fire detections from the MODIS instruments aboard the Aqua and Terra satellites were used to estimate the BB emissions. The FLEXPART particle dispersion model was used to show that the smoke was transported to Spitsbergen and Iceland, which was confirmed by MODIS retrievals of the aerosol optical depth (AOD) and AIRS retrievals of carbon monoxide (CO) total columns. Concentrations of halocarbons, carbon dioxide and CO, as well as levoglucosan and potassium, measured at Zeppelin mountain near Ny Ålesund, were used to further corroborate the BB source of the smoke at Spitsbergen. The ozone (O3) and CO concentrations were the highest ever observed at the Zeppelin station, and gaseous elemental mercury was also enhanced. A new O3 record was also set at a station on Iceland. The smoke was strongly absorbing ? black carbon concentrations were the highest ever recorded at Zeppelin ?, and strongly perturbed the radiation transmission in the atmosphere: aerosol optical depths were the highest ever measured at Ny Ålesund. We furthermore discuss the aerosol chemical composition, obtained from filter samples, as well as the aerosol size distribution during the smoke event. Photographs show that the snow at a glacier on Spitsbergen became discolored during the episode and, thus, the snow albedo was reduced. Samples of this polluted snow contained strongly enhanced levels of potassium, sulphate, nitrate and ammonium ions, thus relating the discoloration to the deposition of the smoke aerosols. This paper shows that, to date, BB has been underestimated as a source of aerosol and air pollution for the Arctic, relative to emissions from fossil fuel combustion. Given its significant impact on air quality over large spatial scales and on radiative processes, the practice of agricultural waste burning should be banned in the future

An analytical inversion method for determining regional and global emissions of greenhouse gases: Sensitivity studies and application to halocarbons

A new analytical inversion method has been developed to determine the regional and global emissions of long-lived atmospheric trace gases. It exploits in situ measurement data from three global networks and builds on backward simulations with a Lagrangian particle dispersion model. The emission information is extracted from the observed concentration increases over a baseline that is itself objectively determined by the inversion algorithm. The method was applied to two hydrofluorocarbons (HFC-134a, HFC-152a) and a hydrochlorofluorocarbon (HCFC-22) for the period January 2005 until March 2007. Detailed sensitivity studies with synthetic as well as with real measurement data were done to quantify the influence on the results of the a priori emissions and their uncertainties as well as of the observation and model errors. It was found that the global a posteriori emissions of HFC-134a, HFC-152a and HCFC-22 all increased from 2005 to 2006. Large increases (21%, 16%, 18%, respectively) from 2005 to 2006 were found for China, whereas the emission changes in North America (−9%, 23%, 17%, respectively) and Europe (11%, 11%, −4%, respectively) were mostly smaller and less systematic. For Europe, the a posteriori emissions of HFC-134a and HFC-152a were slightly higher than the a priori emissions reported to the United Nations Framework Convention on Climate Change (UNFCCC). For HCFC-22, the a posteriori emissions for Europe were substantially (by almost a factor 2) higher than the a priori emissions used, which were based on HCFC consumption data reported to the United Nations Environment Programme (UNEP). Combined with the reported strongly decreasing HCFC consumption in Europe, this suggests a substantial time lag between the reported time of the HCFC-22 consumption and the actual time of the HCFC-22 emission. Conversely, in China where HCFC consumption is increasing rapidly according to the UNEP data, the a posteriori emissions are only about 40% of the a priori emissions. This reveals a substantial storage of HCFC-22 and potential for future emissions in China. Deficiencies in the geographical distribution of stations measuring halocarbons in relation to estimating regional emissions are also discussed in the paper. Applications of the inversion algorithm to other greenhouse gases such as methane, nitrous oxide or carbon dioxide are foreseen for the future

Polybrominated Diphenyl Ethers (PBDEs) and Bioaccumulative Hydroxylated PBDE Metabolites in Young Humans from Managua, Nicaragua

OBJECTIVE: Our aim was to investigate exposure to polybrominated diphenyl ethers (PBDEs) in a young urban population in a developing country, with focus on potentially highly exposed children working informally as scrap scavengers at a large municipal waste disposal site. We also set out to investigate whether hydroxylated metabolites, which not hitherto have been found retained in humans, could be detected. METHODS: We assessed PBDEs in pooled serum samples obtained in 2002 from children 11-15 years of age, working and sometimes also living at the municipal waste disposal site in Managua, and in nonworking urban children. The influence of fish consumption was evaluated in the children and in groups of women 15-44 years of age who differed markedly in their fish consumption. Hydroxylated PBDEs were assessed as their methoxylated derivates. The chemical analyses were performed by gas chromatography/mass spectrometry, using authentic reference substances. RESULTS: The children living and working at the waste disposal site showed very high levels of medium brominated diphenyl ethers. The levels observed in the referent children were comparable to contemporary observations in the United States. The exposure pattern was consistent with dust being the dominating source. The children with the highest PBDE levels also had the highest levels of hydroxylated metabolites. CONCLUSIONS: Unexpectedly, very high levels of PBDEs were found in children from an urban area in a developing country. Also, for the first time, hydroxylated PBDE metabolites were found to bioaccumulate in human serum

Adherence measurements and corrosion resistance in primer/hot-dip galvanized steel systems

This paper focuses on the adherence during ageing of a primer (made of polyester resins crosslinked with melamine) applied onto hot-dip galvanized (HDG) steel for coil coating application and its influence on corrosion protection. A chromium-free surface treatment, composed of fluorotitanic acid, phosphoric acid, manganese phosphate, and vinylphenol was applied on the HDG steel to obtain high corrosion resistance and high adherence of a polyester and melamine primer. The influence of the manganese phosphate on the corrosion and adherence was investigated. To measure the adherence between the metal and the primer, a three-point flexure test was set up. The adherence was then linked with corrosion resistance during ageing, using electrochemical impedance spectroscopy

Characterization and intercomparison of aerosol absorption photometers: Result of two intercomparison workshops

Absorption photometers for real time application have been available since the 1980s, but the use of filter-based instruments to derive information on aerosol properties (absorption coefficient and black carbon, BC) is still a matter of debate. Several workshops have been conducted to investigate the performance of individual instruments over the intervening years. Two workshops with large sets of aerosol absorption photometers were conducted in 2005 and 2007. The data from these instruments were corrected using existing methods before further analysis. The inter-comparison shows a large variation between the responses to absorbing aerosol particles for different types of instruments. The unit to unit variability between instruments can be up to 30% for Particle Soot Absorption Photometers (PSAPs) and Aethalometers. Multi Angle Absorption Photometers (MAAPs) showed a variability of less than 5%. Reasons for the high variability were identified to be variations in sample flow and spot size. It was observed that different flow rates influence system performance with respect to response to absorption and instrumental noise. Measurements with non absorbing particles showed that the current corrections of a cross sensitivity to particle scattering are not sufficient. Remaining cross sensitivities were found to be a function of the total particle load on the filter. The large variation between the response to absorbing aerosol particles for different types of instruments indicates that current correction functions for absorption photometers are not adequate

History of chemically and radiatively important atmospheric gases from the Advanced Global Atmospheric Gases Experiment (AGAGE)

We present the organization, instrumentation, datasets, data interpretation, modeling, and accomplishments of the multinational global atmospheric measurement program AGAGE (Advanced Global Atmospheric Gases Experiment). AGAGE is distinguished by its capability to measure globally, at high frequency, and at multiple sites all the important species in the Montreal Protocol and all the important non-carbon-dioxide (non-CO₂) gases assessed by the Intergovernmental Panel on Climate Change (CO₂ is also measured at several sites). The scientific objectives of AGAGE are important in furthering our understanding of global chemical and climatic phenomena. They are the following: (1) to accurately measure the temporal and spatial distributions of anthropogenic gases that contribute the majority of reactive halogen to the stratosphere and/or are strong infrared absorbers (chlorocarbons, chlorofluorocarbons – CFCs, bromocarbons, hydrochlorofluorocarbons – HCFCs, hydrofluorocarbons – HFCs and polyfluorinated compounds (perfluorocarbons – PFCs), nitrogen trifluoride – NF₃, sulfuryl fluoride – SO₂F₂, and sulfur hexafluoride – SF₆) and use these measurements to determine the global rates of their emission and/or destruction (i.e., lifetimes); (2) to accurately measure the global distributions and temporal behaviors and determine the sources and sinks of non-CO₂ biogenic–anthropogenic gases important to climate change and/or ozone depletion (methane – CH₄, nitrous oxide – N₂O, carbon monoxide – CO, molecular hydrogen – H₂, methyl chloride – CH₃Cl, and methyl bromide – CH₃Br); (3) to identify new long-lived greenhouse and ozone-depleting gases (e.g., SO₂F₂, NF₃, heavy PFCs (C₄F₁₀, C₅F₁₂, C₆F₁₄, C₇F₁₆, and C₈F₁₈) and hydrofluoroolefins (HFOs; e.g., CH₂  =  CFCF₃) have been identified in AGAGE), initiate the real-time monitoring of these new gases, and reconstruct their past histories from AGAGE, air archive, and firn air measurements; (4) to determine the average concentrations and trends of tropospheric hydroxyl radicals (OH) from the rates of destruction of atmospheric trichloroethane (CH₃CCl₃), HFCs, and HCFCs and estimates of their emissions; (5) to determine from atmospheric observations and estimates of their destruction rates the magnitudes and distributions by region of surface sources and sinks of all measured gases; (6) to provide accurate data on the global accumulation of many of these trace gases that are used to test the synoptic-, regional-, and global-scale circulations predicted by three-dimensional models; and (7) to provide global and regional measurements of methane, carbon monoxide, and molecular hydrogen and estimates of hydroxyl levels to test primary atmospheric oxidation pathways at midlatitudes and the tropics. Network Information and Data Repository: <a href="http://agage.mit.edu/data" target="_blank">http://agage.mit.edu/data</a> or <a href="http://cdiac.ess-dive.lbl.gov/ndps/alegage.html" target="_blank">http://cdiac.ess-dive.lbl.gov/ndps/alegage.html</a> (<a href="https://doi.org/10.3334/CDIAC/atg.db1001" target="_blank">https://doi.org/10.3334/CDIAC/atg.db1001</a>)

Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed