Effects of Scratching Parameters on Fabrication of Polymer Nanostructures in Atomic Force Microscope Tapping Mode

AbstractThe nano scratching with an oscillating Atomic Force Microscopy (AFM) tip in tapping mode is called as the dynamic ploughing. The tip is vibrated in a high frequency and scratches the surface which is similar to the conventional vibration-assistant machining process. In the present study, the dynamic ploughing technique is utilized to scratch PolymethylMethacrylate (PMMA) polymer surfaces forming nanostructures with a commercial AFM system and two kinds of cantilevers. Effects of scratching parameters of the dynamic ploughing including scratching velocity, driving amplitude, pitch and the cantilever's elastic constant on the machined results are studied in detail. Finally nano ring structures with different radius are achieved successfully.Video abstrac

Biodiversity and ecosystem function in soil

1. Soils are one of the last great frontiers for biodiversity research and are home to an extraordinary range of microbial and animal groups. Biological activities in soils drive many of the key ecosystem processes that govern the global system, especially in the cycling of elements such as carbon, nitrogen and phosphorus. 2. We cannot currently make firm statements about the scale of biodiversity in soils, or about the roles played by soil organisms in the transformations of organic materials that underlie those cycles. The recent UK Soil Biodiversity Programme (SBP) has brought a unique concentration of researchers to bear on a single soil in Scotland, and has generated a large amount of data concerning biodiversity, carbon flux and resilience in the soil ecosystem. 3. One of the key discoveries of the SBP was the extreme diversity of small organisms: researchers in the programme identified over 100 species of bacteria, 350 protozoa, 140 nematodes and 24 distinct types of arbuscular mycorrhizal fungi. Statistical analysis of these results suggests a much greater 'hidden diversity'. In contrast, there was no unusual richness in other organisms, such as higher fungi, mites, collembola and annelids. 4. Stable-isotope (C-13) technology was used to measure carbon fluxes and map the path of carbon through the food web. A novel finding was the rapidity with which carbon moves through the soil biota, revealing an extraordinarily dynamic soil ecosystem. 5. The combination of taxonomic diversity and rapid carbon flux makes the soil ecosystem highly resistant to perturbation through either changing soil structure or removing selected groups of organisms

The phosphorylation state of eNOS modulates vascular reactivity and outcome of cerebral ischemia in vivo

NO plays critical roles in vascular function. We show that modulation of the eNOS serine 1179 (S1179) phosphorylation site affects vascular reactivity and determines stroke size in vivo. Transgenic mice expressing only a phosphomimetic (S1179D) form of eNOS show greater vascular reactivity, develop less severe strokes, and have improved cerebral blood flow in a middle cerebral artery occlusion model than mice expressing an unphosphorylatable (S1179A) form. These results provide a molecular mechanism by which multiple diverse cardiovascular risks, such as diabetes and obesity, may be centrally integrated by eNOS phosphorylation in vivo to influence blood flow and cardiovascular disease. They also demonstrate the in vivo relevance of posttranslational modification of eNOS in vascular function

Direct amplification of nodD from community DNA reveals the genetic diversity of Rhizobium leguminosarum in soil

Sequences of nodD, a gene found only in rhizobia, were amplified from total community DNA isolated from a pasture soil. The polymerase chain reaction (PCR) primers used, Y5 and Y6, match nodD from Rhizobium leguminosarum biovar trifolii, R. leguminosarum biovar viciae and Sinorhizobium meliloti. The PCR product was cloned and yielded 68 clones that were identified by restriction pattern as derived from biovar trifolii [11 restriction fragment length polymorphism (RFLP) types] and 15 clones identified as viciae (seven RFLP types). These identifications were confirmed by sequencing. There were no clones related to S. meliloti nodD. For comparison, 122 strains were isolated from nodules of white clover (Trifolium repens) growing at the field site, and 134 from nodules on trap plants of T. repens inoculated with the soil. The nodule isolates were of four nodD RFLP types, with 77% being of a single type. All four of these patterns were also found among the clones from soil DNA, and the same type was the most abundant, although it made up only 34% of the trifolii-like clones. We conclude that clover selects specific genotypes from the available soil population, and that R. leguminosarum biovar trifolii was approximately five times more abundant than biovar viciae in this pasture soil, whereas S. meliloti was rare

Impact force identification with pseudo-inverse method on a lightweight structure for under-determined, even-determined and over-determined cases

Force identification using inverse technique is important especially when direct measurement through force transducer is not possible. Considering the effects of impact excitation force on the integrity of a lightweight structure, impact force identification has become the subject of several studies. A methodology utilising Operating Deflection Shape (ODS) analysis, Frequency Response Function (FRF) measurement and pseudo-inverse method to evaluate the dynamic force is presented. A rectangular plate with four ground supports was used as a test rig to simulate the motions of a simple vehicle body. By using the measured responses at remote points that are away from impact locations and measured FRFs of the test rig, unknown force locations and their time histories can be recovered by the proposed method. The performance of this approach in various cases such as under-determined, even-determined and over-determined cases was experimentally demonstrated. Good and bad combinations of response locations were selected based on the condition number of FRF matrix. This force identification method was examined under different response combinations and various numbers of response locations. It shows that in the over-determined case, good combination of response locations (i.e. low average of condition number of FRF matrix) and high number of response locations give the best accuracy of force identification result compared to under-determined and even-determined cases

Carbonaceous nanomaterial reinforced Ti-6Al-4V matrix composites: Properties, interfacial structures and strengthening mechanisms

For conventional titanium matrix composites (TiMCs), there is always a trade-off issue between enhanced strength and ductility of these materials. In this study, we explore a new design methodology by reinforcing titanium alloy matrix with carbonaceous nanomaterials and investigate the mechanisms for achieving a good balance of their strength and ductility. The TiMCs were synthesized through a low-cost powder metallurgy route using pre-mixed Ti-6Al-4V (TC4) powders and various carbon based nanofillers, including graphite powders (GPs), graphene oxide nanosheets (GONs) and graphene nanoplates (GNPs), and were further rolled at a temperature of 1173 K with a deformation of 66.7%. Among these three types of carbon reinforcing sources, the GNPs are more easily reacted with TC4 matrix and form more contents of TiC phases after sintering owing to their larger amounts of defects than those of the GPs and GONs. TiC products are identified to play a bridging role for not only connecting the TC4 matrix but also forming coherent interfaces with the TC4 matrix, thus facilitating a strong interfacial bonding of the composites. The as-rolled GNPs/TC4 composites exhibit a 0.2% yield strength of 1146.36 MPa (with an elongation of ∼8.1%), which is 24.6%, 9.22% and 5.62% higher than those of pure TC4, GPs/TC4 and GONs/TC4 composites. The GNPs/TC4 nanocomposites show a better balance of strength and ductility than those of the other two types of nanocomposites. The synergetic strengthening mechanisms are identified to be Orowan strengthening effect, effective load transfer capability of GNPs, and in-situ formation of interfacial TiC structures, which provide optimum interfacial microstructures to achieve good mechanical properties of the TiMCs

Kalb-Ramond excitations in a thick-brane scenario with dilaton

We compute the full spectrum and eigenstates of the Kalb-Ramond field in a warped non-compact Randall-Sundrum -type five-dimensional spacetime in which the ordinary four-dimensional braneworld is represented by a sine-Gordon soliton. This 3-brane solution is fully consistent with both the warped gravitational field and bulk dilaton configurations. In such a background we embed a bulk antisymmetric tensor field and obtain, after reduction, an infinite tower of normalizable Kaluza-Klein massive components along with a zero-mode. The low lying mass eigenstates of the Kalb-Ramond field may be related to the axion pseudoscalar. This yields phenomenological implications on the space of parameters, particularly on the dilaton coupling constant. Both analytical and numerical results are given.Comment: 10 pages, 13 figures, and 2 tables. Final version to appear in The European Physical Journal

A General Buffer Scheme for the Windows Scheduling Problem

Broadcasting is an efficient alternative to unicast for delivering popular on-demand media requests. Broadcasting schemes that are based on windows scheduling algorithms provide a way to satisfy all requests with both low bandwidth and low latency. Consider a system of n pages that need to be scheduled (transmitted) on identical channels an infinite number of times. Time is slotted, and it takes one time slot to transmit each page. In the windows scheduling problem (WS) each page i, 1 ≤ i ≤ n, is associated with a request window wi. In a feasible schedule for WS, page i must be scheduled at least once in any window of wi time slots. The objective function is to minimize the number of channels required to schedule all the pages. The main contribution of this paper is the design of a general buffer scheme for the windows scheduling problem such that any algorithm for WS follows this scheme. As a result, this scheme can serve as a tool to analyze and/or exhaust all possible WS-algorithms. The buffer scheme is based on modelling the system as a nondeterministic finite state machine in which any directed cycle corresponds to a legal schedule and vice-versa. Since WS is NP-hard, w

Diffusion in Stationary Flow from Mesoscopic Non-equilibrium Thermodynamics

We analyze the diffusion of a Brownian particle in a fluid under stationary flow. By using the scheme of non-equilibrium thermodynamics in phase space, we obtain the Fokker-Planck equation which is compared with others derived from kinetic theory and projector operator techniques. That equation exhibits violation of the fluctuation dissipation-theorem. By implementing the hydrodynamic regime described by the first moments of the non-equilibrium distribution, we find relaxation equations for the diffusion current and pressure tensor, allowing us to arrive at a complete description of the system in the inertial and diffusion regimes. The simplicity and generality of the method we propose, makes it applicable to more complex situations, often encountered in problems of soft condensed matter, in which not only one but more degrees of freedom are coupled to a non-equilibrium bath.Comment: 10 pages, accepted in Phys. Rev.