The effect of aluminium granulometry on the behaviour of filled epoxy resins for rapid tooling

Aluminium filled epoxies moulds have beenused in indirect rapid tooling. These moulds, whichhave a low cost processing, are very competitive,when applied in the manufacturing of low volumeseries.The geometry and the size distribution of thealuminium particles affect significantly the powderpacking density, the resin ratio, the thermalconductivity, the curing time, the homogeneity andthe mechanical characteristics of the tool.Using three high temperature epoxy resins itwas possible to understand the resin behaviour inthe presence of the aluminium filler and formulatefilled resins with the best compromise ofmechanical, thermal and processing performance

Catch composition, catch rates and size selectivity of three long-line methods in the Algarve (southern Portugal)

Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white’ sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red’ sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable ( 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.info:eu-repo/semantics/publishedVersio

Spatial prediction based on self-similarity compensation for 3D holoscopic image and video coding

WOS:000298962501022 (Nº de Acesso Web of Science)Holoscopic imaging, also known as integral imaging, provides a solution for glassless 3D, and is promising to change the market for 3D television. To start, this paper briefly describes the general concepts of holoscopic imaging, focusing mainly on the spatial correlations inherent to this new type of content, which appear due to the micro-lens array that is used for both acquisition and display. The micro-images that are formed behind each micro-lens, from which only one pixel is viewed from a given observation point, have a high cross-correlation between them, which can be exploited for coding. A novel scheme for spatial prediction, exploring the particular arrangement of holoscopic images, is proposed. The proposed scheme can be used for both still image coding and intra-coding of video. Experimental results based on an H.264/AVC video codec modified to handle 3D holoscopic images and video are presented, showing the superior performance of this approach

Catch composition, catch rates and size selectivity of three long-line methods in the Algarve (southern Portugal)

Three long-line methods have been studied in the Algarve: 1) small-hook long-line for inshore (less than 30 m) ‘white' sea breams (Sparidae); 2) small-hook long-line for deeper water (40-60 m) ‘red' sea breams; and 3) deep water (500-700 m) semi-pelagic long-line for hake Merluccius merluccius (Linnaeus, 1758). Selectivity studies were carried out with three hook sizes in the first two cases: Mustad round-bent Quality 2369 hooks, numbers 15, 13, and 11, baited with a standardsized razor-shell Ensis siliqua (Linnaeus, 1758). Four hook sizes (numbers 10, 9, 7, and 5) of Stell round-bent, eyed hooks were used in the semi-pelagic long-line selectivity study, baited with a half of a standard-sized sardine. Some factors affecting catch composition and catch rates of the small hook long-lines were also evaluated: bait, gangion length, setting time, fishing ground, and depth. Species diversity was relatively high, with 40, 36 and 27 species, respectively, in the three studies. However, the catches were dominated by a limited number of species. Catch rates (number of fish per 100 hooks) were variable ( 5 %; 20 %), with a general decrease in catch rate with increasing hook size in all the studies. In general, the catch size distributions for the different hook sizes for each species were highly overlapping, with little or no evidence of differences in size selectivity. Hooks caught a wide size-range for each species, with few or no illegal-sized fish, in most cases. Some implications of these results for the management of multi-species, multi-gear fisheries are discussed.Tres artes de palangre han sido estudiados en Algarve: 1) palangre de anzuelo pequeño para espáridos de aguas costeras (menos de 30 m); 2) palangre de anzuelo pequeño para espáridos rojos de aguas mas profundas (40-60 m); y 3) palangre semipelágico de profundidad para merluza Merluccius merluccius (Linnaeus, 1758). En los dos primeros casos, los estudios de selectividad han utilizado anzuelos de tres tamaños: round bent marca Mustad modelo 2369 (números 15, 13 y 11), utilizando como cebo pedazos de navajas Ensis siliqua (Linnaeus, 1758) de la misma talla. En el estudio de selectividad con el palangre semipelágico se han utilizado cuatro tamaños de anzuelo (números 10, 9, 7 y 5) round hook de la marca Stell, con media sardina como cebo. Se evalúan, también, otros factores que afectan a la composición y a la tasa de captura de los palangres equipados con anzuelo pequeño: cebo, longitud de la puntera, hora de largada del aparejo, área de pesca y profundidad. La diversidad de especies en los tres estudios ha sido relativamente elevada: 40, 36 y 27 especies, respectivamente. Sin embargo, las capturas han sido dominadas por un número reducido de especies. Las tasas de captura (número de peces por 100 anzuelos) han variado ( 5 %; 20 %), observándose en los tres estudios un descenso general de las tasas de captura con el aumento del tamaño del anzuelo. De forma general, se ha observado una fuerte sobreposición de las distribuciones de las capturas con los diferentes tamaños de anzuelo para cada especie, con poca o ninguna evidencia de diferencias en la selectividad por talla. Los tamaños de anzuelo probados han capturado un rango de tallas amplio para cada especie, con escasa o ninguna captura de peces de talla ilegal en la mayoría de los casos. Se discuten algunas implicaciones de estos resultados en la gestión de pesquerías incluyendo varias especies y varios artes de pesca.Instituto Español de Oceanografí

A mechanical analysis of polydicyclopentadiene with metal inserts through flexural load

Polydicyclopentadiene (PDCPD) is being used in several products with particular success regarding to weight reduction and surface finish improvement. Despite the enough good mechanical properties presented by this thermosetting polymer, it needs to be adequately reinforced in applications requiring extra structural stability. This work studies the improvement of mechanical properties that may be achieved in PDCPD components reinforced with over-moulded steel wires by using the reaction injection moulding (RIM). Specimens, with and without metal inserts, were produced by using a special dedicated developed prototype RIM mould to be submitted to three point bending test, according to EN ISO 178:2003 standard. This paper presents and discusses the results obtained from the flexural tests, which allow concluding that the solution could be industrially used in feasible and advantageous conditions.Fundação para a Ciência e a Tecnologia (FCT)Fundos FEDER, Programa Operacional para Fatores de Competitividade – COMPETE, projeto 1384

The African hind's (Cephalopholis taeniops, serranidae) use of artificial reefs off Sal Island (Cape Verde): a preliminary study based on acoustic telemetry

The African hind Cephalopholis taeniops (Valenciennes, 1828) is one of the most important commercial demersal species caught in the Cape Verde archipelago. The species is closely associated with hard substrate and is one of the main attractions for SCUBA divers. In January 2006 a former Soviet fishing vessel - the Kwarcit - was sunk off Santa Maria Bay (Sal Island). Young C. taeniops are commonly observed in this artificial reef (AR). In order to investigate the species' use of the AR, 4 specimens were captured and surgically implanted underwater with Vemco brand acoustic transmitters. The fish were monitored daily with an active telemetry receiver for one week after release. Simultaneously, an array of 3 passive VR2 / VR2W receivers was set for 63 days, registering data that allowed an analysis of spatial, daily and short term temporal activity patterns. The results showed site fidelity to the AR, with no migrations to the nearby natural reef. The method used allowed to register a consistent higher activity during daytime and a preference for the area opposite the dominant current

Identification of fungi isolated from the olive moth (Prays oleae Bern.) based on ITS region

Fundação para a Ciência e Tecnologia (FCT) - Project PTDC/AGR-AAM/102600/200

Optimization of single screw extrusion

Multi-objective evolutionary optimization algorithms (MOEA) are used for the optimization of plasticating single screw extrusion. For this purpose, a specific MOEA is linked to available process modelling routines. The methodology is used to set the operating conditions and identify the screw geometry for a specific case study, thus demonstrating the practical utility of this approach.Project H2020-MSCA-RISE-2016-734205info:eu-repo/semantics/publishedVersio