User-friendly mathematical model for the design of sulfate reducing H2/CO2 fed bioreactors

The paper presents three steady-state mathematical models for the design of H2/CO2 fed gas-lift reactors aimed at biological sulfate reduction to remove sulfate from wastewater. Models 1A and 1B are based on heterotrophic sulfate reducing bacteria (HSRB), while Model 2 is based on autotrophic sulfate reducing bacteria (ASRB) as the dominant group of sulfate reducers in the gas-lift reactor. Once the influent wastewater characteristics are known and the desired sulfate removal efficiency is fixed, all models give explicit mathematical relationships to determine the bioreactor volume and the effluent concentrations of substrates and products. The derived explicit relationships make application of the models very easy, fast and no iterative procedures are required. Model simulations show that the size of the H2/CO2 fed gas-lift reactors aimed at biological sulfate removal from wastewater highly depends on the number and type of trophic groups growing in the bioreactor. In particular, if the biological sulfate reduction is performed in a bioreactor where ASRB prevail, the required bioreactor volume is much smaller than that needed with HSRB. This is because ASRB can out-compete methanogenic archarea (MA) for H2 (assuming sulfate concentrations are not limiting), whereas HSRB do not necessarily out-compete MA due to their dependence on homoacetogenic bacteria (HB) for organic carbon. The reactor sizes to reach the same sulfate removal efficiency by HSRB and ASRB are only comparable when methanogenesis is inhibited. Moreover, model results indicate that acetate supply to the reactor influent does not affect the HSRB biomass required in the reactor, but favours the dominance of MA on HB as a consequence of a lower HB requirement for acetate supply

Quantitative NME microscopy of iron transport in methanogenic aggregates

Transport of micronutrients (iron, cobalt, nickel, etc.) within biofilms matrixes such as methanogenic granules is of high importance, because these are either essential or toxic for the microorganisms living inside the biofilm. The present study demonstrates quantitative measurements of metal transport inside these biofilms using T1 weighted 3D RARE. It is shown that iron(II)-EDTA diffusion within the granule is independent of direction or the inner structure of the granules. Assuming position dependence of the spin-lattice relaxivity, Fick’s law for diffusion in a sphere can be applied to simulate the diffusion within the methanogenic granules under investigation. A relatively low diffusion coefficient of 2.5*10-11 m2·s-1 was obtained for iron diffusion within the methanogenic granul

Alpha-decay Rates of Yb and Gd in Solar Neutrino Detectors

The $\alpha$-decay rates for the nuclides $^{168,170,171,172,173,174,176}$Yb and $^{148,150,152,154}$Gd have been estimated from transmission probabilities in a systematic $\alpha$-nucleus potential and from an improved fit to $\alpha$-decay rates in the rare-earth mass region. Whereas ${\alpha}$-decay of $^{152}$Gd in natural gadolinium is a severe obstacle for the use of gadolinium as a low-energy solar-neutrino detector, we show that ${\alpha}$-decay does not contribute significantly to the background in a ytterbium detector. An extremely long ${\alpha}$-decay lifetime of $^{168}$Yb is obtained from calculation, which may be close to the sensitivity limit in a low-background solar neutrino detector.Comment: 12 pages, 1 figure; An author name was correcte

Sensitivity analysis for an elemental sulfur-based two-step denitrification model

A local sensitivity analysis was performed for a chemically synthesized elemental sulfur (S0)-based two-step denitrification model, accounting for nitrite (NO2-) accumulation, biomass growth and S0 hydrolysis. The sensitivity analysis was aimed at verifying the model stability, understanding the model structure and individuating the model parameters to be further optimized. The mass specific area of the sulfur particles (a*) and hydrolysis kinetic constant (k1) were identified as the dominant parameters on the model outputs, i.e. nitrate (NO3-), NO2- and sulfate (SO42-) concentrations, confirming that the microbially catalyzed S0 hydrolysis is the rate-limiting step during S0-driven denitrification. Additionally, the maximum growth rates of the denitrifying biomass on NO3- and NO2- were detected as the most sensitive kinetic parameters

Variation in xylem structure from tropics to tundra: Evidence from vestured pits

Bordered pits play an important role in permitting water flow among adjacent tracheary elements in flowering plants. Variation in the bordered pit structure is suggested to be adaptive in optimally balancing the conflict between hydraulic efficiency (conductivity) and safety from air entry at the pit membrane (air seeding). The possible function of vestured pits, which are bordered pits with protuberances from the secondary cell wall of the pit chamber, could be increased hydraulic resistance or minimized vulnerability to air seeding. These functional hypotheses have to be harmonized with the notion that the vestured or nonvestured nature of pits contains strong phylogenetic signals (i.e., often characterize large species-rich clades with broad ecological ranges). A literature survey of 11,843 species covering 6,428 genera from diverse climates indicates that the incidence of vestured pits considerably decreases from tropics to tundra. The highest frequencies of vestured pits occur in deserts and tropical seasonal woodlands. Moreover, a distinctly developed network of branched vestures is mainly restricted to warm habitats in both mesic and dry (sub)tropical lowlands, whereas vestures in woody plants from cold and boreal arctic environments are usually minute and simple. A similar survey of the frequency of exclusively scalariform perforation plates illustrates that the major ecological trend of this feature is opposite that of vestured pits. These findings provide previously undescribed insights suggesting that vessels with vestured pits and simple perforation plates function as an efficient hydraulic system in plants growing in warm environments with periodical or continuous drought stress. NaturalisPlant science

Magnetic properties of biogenic selenium nanomaterials

International audienceBioreduction of selenium oxyanions to elemental selenium is ubiquitous; elucidating the properties of this biogenic elemental selenium (BioSe) is thus important to understand its environmental fate. In this study, the magnetic properties of biogenic elemental selenium nanospheres (BioSe-Nanospheres) and nanorods (BioSe-Nanorods) obtained via the reduction of selenium(IV) using anaerobic granular sludge taken from an upflow anaerobic sludge blanket (UASB) reactor treating paper and pulp wastewater were investigated. The study indicated that the BioSe nanomaterials have a strong paramagnetic contribution with some ferromagnetic component due to the incorporation of Fe(III) (high-spin and low-spin species) as indicated by electron paramagnetic resonance (EPR). The paramagnetism did not saturate up to 50,000 Oe at 5 K, and the hysteresis curve showed the coercivity of 100 Oe and magnetic moment saturation around 10 emu. X-ray photoelectron spectroscopy (XPS) and EPR evidenced the presence of Fe(III) in the nanomaterial. Signals for Fe(II) were observed neither in EPR nor in XPS ruling out its presence in the BioSe nanoparticles. Fe(III) being abundantly present in the sludge likely got entrapped in the extracellular polymeric substances (EPS) coating the biogenic nanomaterials. The presence of Fe(III) in BioSe nanomaterial increases the mobility of Fe(III) and may have an effect on phytoplankton growth in the environment. Furthermore, as supported by the literature, there is a potential to exploit the magnetic properties of BioSe nanomaterials in drug delivery systems as well as in space refrigeration