1,345 research outputs found
Optimizing optical Bragg scattering for single-photon frequency conversion
We develop a systematic theory for optimising single-photon frequency
conversion using optical Bragg scattering. The efficiency and phase-matching
conditions for the desired Bragg scattering conversion as well as spurious
scattering and modulation instability are identified. We find that third-order
dispersion can suppress unwanted processes, while dispersion above the fourth
order limits the maximum conversion efficiency. We apply the optimisation
conditions to frequency conversion in highly nonlinear fiber, silicon nitride
waveguides and silicon nanowires. Efficient conversion is confirmed using full
numerical simulations. These design rules will assist the development of
efficient quantum frequency conversion between multicolour single photon
sources for integration in complex quantum networks.Comment: 9 pages, 14 figure
Fiber Four-Wave Mixing Source for Coherent Anti-Stokes Raman Scattering Microscopy
We present a fiber-format picosecond light source for coherent anti-Stokes Raman scattering microscopy. Pulses from an Yb-doped fiber amplifier are frequency-converted by four-wave mixing in normal dispersion photonic crystal fiber to produce a synchronized two-color picosecond pulse train. We show that seeding the four-wave mixing process overcomes the deleterious effects of group-velocity mismatch and allows efficient conversion into narrow frequency bands. The source generates more than 160 mW of nearly-transform-limited pulses tunable from 775 to 815 nm. High-quality coherent Raman images of animal tissues and cells acquired with this source are presented.Chemistry and Chemical Biolog
Magnetic fields in noncommutative quantum mechanics
We discuss various descriptions of a quantum particle on noncommutative space
in a (possibly non-constant) magnetic field. We have tried to present the basic
facts in a unified and synthetic manner, and to clarify the relationship
between various approaches and results that are scattered in the literature.Comment: Dedicated to the memory of Julius Wess. Work presented by F. Gieres
at the conference `Non-commutative Geometry and Physics' (Orsay, April 2007
Microbiological, histological, immunological, and toxin response to antibiotic treatment in the mouse model of Mycobacterium ulcerans disease.
Mycobacterium ulcerans infection causes a neglected tropical disease known as Buruli ulcer that is now found in poor rural areas of West Africa in numbers that sometimes exceed those reported for another significant mycobacterial disease, leprosy, caused by M. leprae. Unique among mycobacterial diseases, M. ulcerans produces a plasmid-encoded toxin called mycolactone (ML), which is the principal virulence factor and destroys fat cells in subcutaneous tissue. Disease is typically first manifested by the appearance of a nodule that eventually ulcerates and the lesions may continue to spread over limbs or occasionally the trunk. The current standard treatment is 8 weeks of daily rifampin and injections of streptomycin (RS). The treatment kills bacilli and wounds gradually heal. Whether RS treatment actually stops mycolactone production before killing bacilli has been suggested by histopathological analyses of patient lesions. Using a mouse footpad model of M. ulcerans infection where the time of infection and development of lesions can be followed in a controlled manner before and after antibiotic treatment, we have evaluated the progress of infection by assessing bacterial numbers, mycolactone production, the immune response, and lesion histopathology at regular intervals after infection and after antibiotic therapy. We found that RS treatment rapidly reduced gross lesions, bacterial numbers, and ML production as assessed by cytotoxicity assays and mass spectrometric analysis. Histopathological analysis revealed that RS treatment maintained the association of the bacilli with (or within) host cells where they were destroyed whereas lack of treatment resulted in extracellular infection, destruction of host cells, and ultimately lesion ulceration. We propose that RS treatment promotes healing in the host by blocking mycolactone production, which favors the survival of host cells, and by killing M. ulcerans bacilli
Fiber optical parametric oscillator for coherent anti-Stokes Raman scattering microscopy
We present a synchronously pumped fiber optical parametric oscillator for coherent anti-Stokes Raman scattering microscopy. Pulses from a 1 μm Yb-doped fiber laser are amplified and frequency converted to 779–808 nm through normal dispersion four-wave mixing in a photonic crystal fiber. The idler frequency is resonant in the oscillator cavity, and we find that bandpass filtering the feedback is essential for a stable, narrow-bandwidth output. Experimental results agree quite well with numerical simulations of the device. Transform-limited 2 ps pulses with energy up to 4 nJ can be generated at the signal wavelength. The average power is 180 mW, and the relative-intensity noise is much lower than that of a similar parametric amplifier. High-quality coherent Raman images of mouse tissues recorded with this source are presented
Measurement of the ratio of branching fractions BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma)
The ratio of branching fractions of the radiative B decays B0 -> K*0 gamma
and Bs0 -> phi gamma has been measured using 0.37 fb-1 of pp collisions at a
centre of mass energy of sqrt(s) = 7 TeV, collected by the LHCb experiment. The
value obtained is BR(B0 -> K*0 gamma)/BR(Bs0 -> phi gamma) = 1.12 +/- 0.08
^{+0.06}_{-0.04} ^{+0.09}_{-0.08}, where the first uncertainty is statistical,
the second systematic and the third is associated to the ratio of fragmentation
fractions fs/fd. Using the world average for BR(B0 -> K*0 gamma) = (4.33 +/-
0.15) x 10^{-5}, the branching fraction BR(Bs0 -> phi gamma) is measured to be
(3.9 +/- 0.5) x 10^{-5}, which is the most precise measurement to date.Comment: 15 pages, 1 figure, 2 table
Observation of resonances consistent with pentaquark states in decays
Observations of exotic structures in the channel, that we refer to
as pentaquark-charmonium states, in decays are
presented. The data sample corresponds to an integrated luminosity of 3/fb
acquired with the LHCb detector from 7 and 8 TeV pp collisions. An amplitude
analysis is performed on the three-body final-state that reproduces the
two-body mass and angular distributions. To obtain a satisfactory fit of the
structures seen in the mass spectrum, it is necessary to include two
Breit-Wigner amplitudes that each describe a resonant state. The significance
of each of these resonances is more than 9 standard deviations. One has a mass
of MeV and a width of MeV, while the second
is narrower, with a mass of MeV and a width of MeV. The preferred assignments are of opposite parity, with one
state having spin 3/2 and the other 5/2.Comment: 48 pages, 18 figures including the supplementary material, v2 after
referee's comments, now 19 figure
Observation of the decay
The decay is observed in collision
data corresponding to an integrated luminosity of 3 fb recorded by the
LHCb detector at centre-of-mass energies of 7 TeV and 8 TeV. This is the first
observation of this decay channel, with a statistical significance of 15
standard deviations. The mass of the meson is measured to be
MeV/c. The branching fraction ratio
is measured to be 0.0115\,\pm\, 0.0012\, ^{+0.0005}_{-0.0009}.
In both cases, the first uncertainty is statistical and the second is
systematic. No evidence for non-resonant or decays is found.Comment: All figures and tables, along with any supplementary material and
additional information, are available at
https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2015-033.htm
Measurement of the CKM angle γ from a combination of B±→Dh± analyses
A combination of three LHCb measurements of the CKM angle γ is presented. The decays B±→D K± and
B±→Dπ± are used, where D denotes an admixture of D0 and D0 mesons, decaying into K+K−, π+π−, K±π∓, K±π∓π±π∓, K0Sπ+π−, or K0S K+K− final states. All measurements use a dataset corresponding to 1.0 fb−1 of integrated luminosity. Combining results from B±→D K± decays alone a best-fit value of
γ =72.0◦ is found, and confidence intervals are set
γ ∈ [56.4,86.7]◦ at 68% CL,
γ ∈ [42.6,99.6]◦ at 95% CL.
The best-fit value of γ found from a combination of results from B±→Dπ± decays alone, is γ =18.9◦,
and the confidence intervals
γ ∈ [7.4,99.2]◦ ∪ [167.9,176.4]◦ at 68% CL
are set, without constraint at 95% CL. The combination of results from B± → D K± and B± → Dπ±
decays gives a best-fit value of γ =72.6◦ and the confidence intervals
γ ∈ [55.4,82.3]◦ at 68% CL,
γ ∈ [40.2,92.7]◦ at 95% CL
are set. All values are expressed modulo 180◦, and are obtained taking into account the effect of D0–D0
mixing
- …