Development of a high-performance W-band duplexer for plasma diagnosis using a single band with dual circular polarization

Discrepancia entre la información que aparece en el artículo que indica que el copyright es de Elsevier, y la información que aparece en la página de la revista y en el Copyright Clearance Center que indican © 2019 The Authors. Published by Elsevier B.V., así como que el artículo está publicado en Open Access under a Creative Commons licenceThis work presents the design and experimental validation of a high performance, compact, waveguide duplexer operating from 91.5 to 96.5 GHz for its integration in diverse W-band microwave equipment as in plasma diagnosis applications. It uses a single frequency band, with two signals discriminated by different orthogonal circular polarization, which is generated by means of a septum orthomode transducer (OMT) polarizer. Moreover, this component is optimized loaded with the horn antenna for improving the overall system performance. It is explained how these two components are integrated into a very compact duplexer, designed using efficient numerical algorithms. The manufacturing process by mean of high precision milling, and including electrical discharge machining (EDM) has led to excellent performances. The measured return loss level and isolation are higher than 30 dB, and the insertion loss level is below 0.3 dB. Finally, the key parameter in this device, which reflects the symmetry in the manufacturing process, i.e., the axial ratio, is lower than 0.6 dB for both polarizations, an excellent result showing the potential of the presented designThis work was supported by the Spanish government under grants (ADDMATE) TEC2016-76070-C3-1/2-R (Agencia Estatal de Investigación, Spain, Fondo Europeo de Desarrollo Regional: AEI/FEDER/UE) and the program of Comunidad de Madrid, Spain S2013/ICE-3000 (SPADERADARCM

Optimizing the Number of Learning Cycles in the Design of Radial Basis Neural Networks

Abstract. Radial Basis Neural (RBN) network has the power of the universal approximation function and the convergence of those networks is very fast compared to multilayer feedforward neural networks. However, how to determine the architecture of the RBN networks to solve a given problem is not straightforward. In addition, the number of hidden units allocated in an RBN network seems to be a critical factor in the performance of these networks. In this work, the design of RBN network is based on the cooperation of n + m agents: n RBN agents and m manager agents. The n + m agents are organized in a Multi-agent System. The training process is distributed among the n RBN agents, each one with a different number of neurons. Each agent executes a number of training cyeles, a stage, when the manager decides about that is the best RBN agent and sends it the corresponding message. The m manager agents have in charge to control the evolution of each problem. Each manager agent controls one problem. Manager agents govern the whole process; each one decides about the b~st RBN agent in each stage for each problem. The results show that the proposed method is able to find them most adequate RBN network architecture. In addition, a reduction in the number of training cyeles is obtained with the proposed Multi-agent strategy instead of sequential strategy.Publicad

Training needs in TQM: the Portuguese perspective

A survey to assess training needs in TQM was developed in several European countries, within the framework of a Leonardo’s project named IMVOCED. Beyond a comparison of the results in each country, a global analysis was performed to design a TQM programme to be delivered by WBL (Work Based Learning). Differences were found between countries, and the Portuguese results also revealed that different approaches to TQM training should be adopted according to the organisation’s dimension. Based on this evidence, two different strategies for TQM training by WBL are proposed and discussed

LabVIEW-based control and acquisition system for the dosimetric characterization of a silicon strip detector

Theaimofthisworkistopresentanewdataacquisition,control,andanalysissoftwaresystemwrittenin LabVIEW.Thissystemhasbeendesignedtoobtainthedosimetryofasiliconstripdetectorinpolyethylene. It allows the full automation of the experiments and data analysis required for the dosimetric characterization of silicon detectors. It becomes a useful tool that can be applied in the daily routine check of a beam accelerator.MINECO ICTI2013-2016/FPA2013-47327-C2-1-RMINECO ICTI2013-2016/FPA2014-53290-C2-2- PJunta de Andalucía P12-FQM-160

Nugget Formation and Mechanical Behaviour of Friction Stir Welds of Three Dissimilar Aluminum Alloys

The aim of this research was to investigate the influence of the properties of the base materials and welding speed on the morphology and mechanical behavior of the friction stir welds of three dissimilar aluminum alloys in a T-joint configuration. The base materials were the AA2017-T4, AA5083-H111, and AA6082-T6 alloys in 3 mm-thick sheets. The AA6082-T6 alloy was the stringer, and the other alloys were located either on the advancing or retreating sides of the skin. All the T-joint welds were produced with a constant tool rotation speed but with different welding speeds. The microstructures of the welds were analyzed using optical microscopy, scanning electron microscopy with energy dispersive spectroscopy, and the electron backscatter diffraction technique. The mechanical properties were assessed according to micro-hardness, tensile, and fatigue testing. Good quality welds of the three dissimilar aluminum alloys could be achieved with friction stir welding, but a high ratio between the tool's rotational and traverse speeds was required. The welding speed influenced the weld morphology and fatigue strength. The positioning of the skin materials influenced the nugget morphology and the mechanical behavior of the joints. The joints in which the AA2017 alloy was positioned on the advancing side presented the best tensile properties and fatigue strength.info:eu-repo/semantics/publishedVersio

Effects of match location, quality of opposition and match outcome on match running performance in a Portuguese professional football team

The aim of this study was to analyze the effects of match location, quality of opposition and match outcome on match running performance according to playing position in a Portuguese professional football team. Twenty-three male professional football players were monitored from eighteen Portuguese Football League matches during the 2019–2020 season. Global positioning system technology (GPS) was used to collect time-motion data. The match running performance was obtained from five playing positions: central defenders (CD), fullbacks (FB), central midfielders (CM), wide midfielders (WM) and forwards (FW). Match running performance was analyzed within specific position and contextual factors using one-way analysis of variance (ANOVA) for repeated measures, standardized (Cohen) differences and smallest worthwhile change. CM and WM players covered significantly greater total distance (F = 15.45, p = 0.000, η2 = 0.334) and average speed (F = 12.79, p < 0.001, η2 = 0.294). WM and FB players covered higher distances at high-speed running (F = 16.93, p = 0.000, η2 = 0.355) and sprinting (F = 13.49; p < 0.001, η2 = 0.305). WM players covered the highest number of accelerations (F = 4.69, p < 0.001, η2 = 0.132) and decelerations (F = 12.21, p < 0.001, η2 = 0.284). The match running performance was influenced by match location (d = 0.06–2.04; CI: −0.42–2.31; SWC = 0.01–1.10), quality of opposition (d = 0.13–2.14; CI: –0.02–2.60; SWC = 0.01–1.55) and match outcome (d = 0.01–2.49; CI: −0.01–2.31; SWC = 0.01–0.35). Contextual factors influenced the match running performance with differential effects between playing positions. This study provides the first report about the contextual influence on match running performance in a Portuguese professional football team. Future research should also integrate tactical and technical key indicators when analyzing the match-related contextual influence on match running performanceThis research was supported by the Douro Higher Institute of Educational Sciences and the Portuguese Foundation for Science and Technology, I.P. (project UIDB04045/2021)info:eu-repo/semantics/publishedVersio

Hope for GWAS: Relevant Risk Genes Uncovered from GWAS Statistical Noise

Hundreds of genetic variants have been associated to common diseases through genome-wide association studies (GWAS), yet there are limits to current approaches in detecting true small effect risk variants against a background of false positive findings. Here we addressed the missing heritability problem, aiming to test whether there are indeed risk variants within GWAS statistical noise and to develop a systematic strategy to retrieve these hidden variants. Employing an integrative approach, which combines protein-protein interactions with association data from GWAS for 6 common diseases, we found that associated-genes at less stringent significance levels (p < 0.1) with any of these diseases are functionally connected beyond noise expectation. This functional coherence was used to identify disease-relevant subnetworks, which were shown to be enriched in known genes, outperforming the selection of top GWAS genes. As a proof of principle, we applied this approach to breast cancer, supporting well-known breast cancer genes, while pinpointing novel susceptibility genes for experimental validation. This study reinforces the idea that GWAS are under-analyzed and that missing heritability is rather hidden. It extends the use of protein networks to reveal this missing heritability, thus leveraging the large investment in GWAS that produced so far little tangible gain.FCT: SFRH/BPD/64281/2009

Joining of fibre-reinforced thermoplastic polymer composites by friction stir welding—A review

The objective of the current work is to show the potential of the friction stir welding (FSW) and its variants to join fibre-reinforced thermoplastic polymer (FRTP) composites. To accomplish that, the FSW technique and two other important variants, the friction stir spot welding (FSSW) and the refill friction stir spot welding (RFSSW), are presented and explained in a brief but complete way. Since the joining of FRTP composites by FSSW has not yet been demonstrated, the literature review will be focused on the FSW and RFSSW techniques. In each review, the welding conditions and parameters studied by the different authors are presented and discussed, as well as the most important conclusions taken from them. About FSW, it can be concluded that the rotational speed and the welding speed have great influence on heat generation, mixture quality, and fibre fragmentation degree, while the tilt angle only has residual influence on the process. The reduction of internal and external defects can be achieved by adjusting axial force and plunge depth. Threaded or grooved conical pins achieved better results than other geometries. Stationary shoulder tools showed better performance than conventional tools. Regarding the RFSSW, it has not yet been possible to deepen conclusions about most of the welding parameters, but its feasibility is demonstrated.info:eu-repo/semantics/publishedVersio

Green Space Typologies in the City of Porto – Portugal: Identifying Nodes and Links for Greenway Planning

In the XIX century, Porto was a small and compact urban centre surrounded by a large belt of agriculture and forest. Since the mid XX century, as a consequence of the industrial revolution, the city sprawled throughout the rural fringes up to its administrative limits creating an urban continuum with the adjacent municipalities. As a result, the current green structure of the city lacks a long-term planning strategy with resulting breakdown of the rural matrix, fragmentation and discontinuity of main green systems. Functioning as habitat and corridors, urban greenways are very effective strategies for minimizing overall impacts of ecological fragmentation: habitat loss and habitat isolation. A greenway system articulates ecological structure and function, providing simultaneously recreational opportunities, biodiversity protection and assuring present and future open space needs (Ahern, 2002). Currently, greenways are being established in cities worldwide, proving their relevance, especially in rapidly changing urban contexts. Supported by these assumptions and the results of current studies on Porto green structure, this work aims at proposing a greenway network for the city, grounded on an integrated and coherent system of multifunctional green areas. The adopted approach relies on the premise that a structure of green nodes and links (corridors) should act as the framework for that greenway system