1,615 research outputs found
Mitochondrial and chloroplast stress responses are modulated in distinct touch and chemical inhibition phases
Previous studies have identified a range of transcription factors that modulate retrograde regulation of mitochondrial and chloroplast functions in Arabidopsis (Arabidopsis thaliana). However, the relative importance of these regulators and whether they act downstream of separate or overlapping signaling cascades is still unclear. Here, we demonstrate that multiple stress-related signaling pathways, with distinct kinetic signatures, converge on overlapping gene sets involved in energy organelle function. The transcription factor ANAC017 is almost solely responsible for transcript induction of marker genes around 3 to 6 h after chemical inhibition of organelle function and is a key regulator of mitochondrial and specific types of chloroplast retrograde signaling. However, an independent and highly transient gene expression phase, initiated within 10 to 30 min after treatment, also targets energy organelle functions, and is related to touch and wounding responses. Metabolite analysis demonstrates that this early response is concurrent with rapid changes in tricarboxylic acid cycle intermediates and large changes in transcript abundance of genes encoding mitochondrial dicarboxylate carrier proteins. It was further demonstrated that transcription factors AtWRKY15 and AtWRKY40 have repressive regulatory roles in this touch-responsive gene expression. Together, our results show that several regulatory systems can independently affect energy organelle function in response to stress, providing different means to exert operational control
The dual targeting ability of type II NAD(P)H dehydrogenases arose early in land plant evolution
Background: Type II NAD(PH) dehydrogenases are located on the inner mitochondrial membrane of plants, fungi, protists and some primitive animals. However, recent observations have been made which identify several Arabidopsis type II dehydrogenases as dual targeted proteins. Targeting either mitochondria and peroxisomes or mitochondria and chloroplasts. Results: Members of the ND protein family were identified in various plant species. Phylogenetic analyses and subcellular targeting predictions were carried out for all proteins. All ND proteins from three model plant species Arabidopsis, rice and Physcomitrella were cloned as N- and C-terminal GFP fusions and subcellular localisations were determined. Dual targeting of plant type II dehydrogenases was observed to have evolved early in plant evolution and to be widespread throughout different plant species. In all three species tested dual targeting to both mitochondria and peroxisomes was found for at least one NDA and NDB type protein. In addition two NDB type proteins from Physcomitrella were also found to target chloroplasts. The dual targeting of NDC type proteins was found to have evolved later in plant evolution. Conclusions: The functions of type II dehydrogenases within plant cells will have to be re-evaluated in light of this newly identified subcellular targeting information
A Neutron Star with a Massive Progenitor in Westerlund 1
We report the discovery of an X-ray pulsar in the young, massive Galactic
star cluster Westerlund 1. We detected a coherent signal from the brightest
X-ray source in the cluster, CXO J164710.2-455216, during two Chandra
observations on 2005 May 22 and June 18. The period of the pulsar is 10.6107(1)
s. We place an upper limit to the period derivative of Pdot<2e-10 s/s, which
implies that the spin-down luminosity is Edot<3e33 erg/s. The X-ray luminosity
of the pulsar is L_X = 3(+10,-2)e33 (D/5 kpc)^2 erg/s, and the spectrum can be
described by a kT = 0.61+/-0.02 keV blackbody with a radius of R_bb =
0.27+/-0.03 (D/5 kpc}) km. Deep infrared observations reveal no counterpart
with K1 Msun. Taken together,
the properties of the pulsar indicate that it is a magnetar. The rarity of slow
X-ray pulsars and the position of CXO J164710.2-455216 only 1.6' from the core
of Westerlund 1 indicates that it is a member of the cluster with >99.97%
confidence. Westerlund 1 contains 07V stars with initial masses M_i=35 Msun and
>50 post-main-sequence stars that indicate the cluster is 4+/-1 Myr old.
Therefore, the progenitor to this pulsar had an initial mass M_i>40 Msun. This
is the most secure result among a handful of observational limits to the masses
of the progenitors to neutron stars.Comment: 4 pages, 5 figures. Final version to match ApJL (added one figure
since v2
The Least Luminous Galaxy: Spectroscopy of the Milky Way Satellite Segue 1
We present Keck/DEIMOS spectroscopy of Segue 1, an ultra-low luminosity (M_V
= -1.5) Milky Way satellite companion. While the combined size and luminosity
of Segue 1 are consistent with either a globular cluster or a dwarf galaxy, we
present spectroscopic evidence that this object is a dark matter-dominated
dwarf galaxy. We identify 24 stars as members of Segue 1 with a mean
heliocentric recession velocity of 206 +/- 1.3 kms. We measure an internal
velocity dispersion of 4.3+/-1.2 kms. Under the assumption that these stars are
in dynamical equilibrium, we infer a total mass of 4.5^{+4.7}_{-2.5} x 10^5
Msun in the case where mass-follow-light; using a two-component maximum
likelihood model, we determine a similar mass within the stellar radius of 50
pc. This implies a mass-to-light ratio of ln(M/L_V) = 7.2^{+1.1}_{-1.2} or
M/L_V = 1320^{+2680}_{-940}. The error distribution of the mass-to-light ratio
is nearly log-normal, thus Segue 1 is dark matter-dominated at a high
significance. Using spectral synthesis modeling, we derive a metallicity for
the single red giant branch star in our sample of [Fe/H]=-3.3 +/- 0.2 dex.
Finally, we discuss the prospects for detecting gamma-rays from annihilation of
dark matter particles and show that Segue 1 is the most promising satellite for
indirect dark matter detection. We conclude that Segue 1 is the least luminous
of the ultra-faint galaxies recently discovered around the Milky Way, and is
thus the least luminous known galaxy.Comment: 12 pages, 6 figures, ApJ accepte
Recommended from our members
Mediating punitiveness: understanding public attitudes towards work-related fatality cases
This paper concerns an empirical investigation into public attitudes towards work-related fatality cases, where organizational offenders cause the death of workers or members of the public. This issue is particularly relevant following the introduction of the Corporate Manslaughter and Corporate Homicide Act 2007 into UK law. Here, as elsewhere, the use of criminal law against companies reflects governmental concerns over public confidence in the law’s ability to regulate risk. The empirical findings demonstrate that high levels of public concern over these cases do not translate into punitive attitudes. Such cases are viewed rationally and constructively, and lead to instrumental rather than purely expressive enforcement preferences
Lucky Imaging Adaptive Optics of the brown dwarf binary GJ569Bab
The potential of combining Adaptive Optics (AO) and Lucky Imaging (LI) to
achieve high precision astrometry and differential photometry in the optical is
investigated by conducting observations of the close 0\farcs1 brown dwarf
binary GJ569Bab. We took 50000 -band images with our LI instrument FastCam
attached to NAOMI, the 4.2-m William Herschel Telescope (WHT) AO facility. In
order to extract the most of the astrometry and photometry of the GJ569Bab
system we have resorted to a PSF fitting technique using the primary star
GJ569A as a suitable PSF reference which exhibits an -band magnitude of
. The AO+LI observations at WHT were able to resolve the binary
system GJ569Bab located at 4\farcs 92 \pm 0\farcs05 from GJ569A. We measure a
separation of mas and -band magnitudes of
and and colors of 2.720.08 and 2.830.08 for
the Ba and Bb components, respectively. Our study rules out the presence of any
other companion to GJ569A down to magnitude I 17 at distances larger than
1\arcsec. The colors measured are consistent with M8.5-M9 spectral types
for the Ba and Bb components. The available dynamical, photometric and
spectroscopic data are consistent with a binary system with Ba being slightly
(10-20%) more massive than Bb. We obtain new orbital parameters which are in
good agreement with those in the literature.Comment: 13 pages, 9 figures, 7 tables, in press in MNRA
Analytic Detection Thresholds for Measurements of Linearly Polarized Intensity Using Rotation Measure Synthesis
A fully analytic statistical formalism does not yet exist to describe
radio-wavelength measurements of linearly polarized intensity that are produced
using rotation measure synthesis. In this work we extend the analytic formalism
for standard linear polarization, namely that describing measurements of the
quadrature sum of Stokes Q and U intensities, to the rotation measure synthesis
environment. We derive the probability density function and expectation value
for Faraday-space polarization measurements for both the case where true
underlying polarized emission is present within unresolved Faraday components,
and for the limiting case where no such emission is present. We then derive
relationships to quantify the statistical significance of linear polarization
measurements in terms of standard Gaussian statistics. The formalism developed
in this work will be useful for setting signal-to-noise ratio detection
thresholds for measurements of linear polarization, for the analysis of
polarized sources potentially exhibiting multiple Faraday components, and for
the development of polarization debiasing schemes.Comment: 14 pages, 6 figures, accepted for publication in MNRA
Analyzing Recent Coronary Heart Disease Mortality Trends in Tunisia between 1997 and 2009.
BACKGROUND: In Tunisia, Cardiovascular Diseases are the leading causes of death (30%), 70% of those are coronary heart disease (CHD) deaths and population studies have demonstrated that major risk factor levels are increasing.
OBJECTIVE: To explain recent CHD trends in Tunisia between 1997 and 2009.
METHODS: DATA SOURCES: Published and unpublished data were identified by extensive searches, complemented with specifically designed surveys.
ANALYSIS: Data were integrated and analyzed using the previously validated IMPACT CHD policy model. Data items included: (i)number of CHD patients in specific groups (including acute coronary syndromes, congestive heart failure and chronic angina)(ii) uptake of specific medical and surgical treatments, and(iii) population trends in major cardiovascular risk factors (smoking, total cholesterol, systolic blood pressure (SBP), body mass index (BMI), diabetes and physical inactivity).
RESULTS: CHD mortality rates increased by 11.8% for men and 23.8% for women, resulting in 680 additional CHD deaths in 2009 compared with the 1997 baseline, after adjusting for population change. Almost all (98%) of this rise was explained by risk factor increases, though men and women differed. A large rise in total cholesterol level in men (0.73 mmol/L) generated 440 additional deaths. In women, a fall (-0.43 mmol/L), apparently avoided about 95 deaths. For SBP a rise in men (4 mmHg) generated 270 additional deaths. In women, a 2 mmHg fall avoided 65 deaths. BMI and diabetes increased substantially resulting respectively in 105 and 75 additional deaths. Increased treatment uptake prevented about 450 deaths in 2009. The most important contributions came from secondary prevention following Acute Myocardial Infarction (AMI) (95 fewer deaths), initial AMI treatments (90), antihypertensive medications (80) and unstable angina (75).
CONCLUSIONS: Recent trends in CHD mortality mainly reflected increases in major modifiable risk factors, notably SBP and cholesterol, BMI and diabetes. Current prevention strategies are mainly focused on treatments but should become more comprehensive
Modeling the initiation of others into injection drug use, using data from 2,500 injectors surveyed in Scotland during 2008-2009
The prevalence of injection drug use has been of especial interest for assessment of the impact of blood-borne viruses. However, the incidence of injection drug use has been underresearched. Our 2-fold aim in this study was to estimate 1) how many other persons, per annum, an injection drug user (IDU) has the equivalent of full responsibility (EFR) for initiating into injection drug use and 2) the consequences for IDUs' replacement rate. EFR initiation rates are strongly associated with incarceration history, so that our analysis of IDUs' replacement rate must incorporate when, in their injecting career, IDUs were first incarcerated. To do so, we have first to estimate piecewise constant incarceration rates in conjunction with EFR initiation rates, which are then combined with rates of cessation from injecting to model IDUs' replacement rate over their injecting career, analogous to the reproduction number of an epidemic model. We apply our approach to Scotland's IDUs, using over 2,500 anonymous injector participants who were interviewed in Scotland's Needle Exchange Surveillance Initiative during 2008-2009. Our approach was made possible by the inclusion of key questions about initiations. Finally, we extend our model to include an immediate quit rate, as a reasoned compensation for higher-than-expected replacement rates, and we estimate how high initiates' quit rate should be for IDUs' replacement rate to be 1
Hardened properties of high-performance printing concrete
This paper presents the hardened properties of a high-performance fibre-reinforced fine-aggregate concrete extruded through a 9 mm diameter nozzle to build layer-by-layer structural components in a printing process. The printing process is a digitally controlled additive method capable of manufacturing architectural and structural components without formwork, unlike conventional concrete construction methods. The effects of the layering process on density, compressive strength, flexural strength, tensile bond strength and drying shrinkage are presented together with the implication for mix proportions. A control concrete (mould-cast specimens) had a density of approximately 2250 kg/m3, high strength (107 MPa in compression, 11 MPa in flexure) and 3 MPa in direct tension, together with a relatively low drying shrinkage of 175 μm (cured in water) and 855 μm (cured in a chamber at 20 °C and 60% relative humidity) at 184 days. In contrast well printed concrete had a density of 2350 kg/m3, compressive strength of 75–102 MPa, flexural strength of 6–17 MPa depending on testing direction, and tensile bond strength between layers varying from 2.3 to 0.7 MPa, reducing as the printing time gap between layers increased. The well printed concrete had significantly fewer voids greater than 0.2 mm diameter (1.0%) when compared with the mould-cast control (3.8%), whilst samples of poorly printed material had more voids (4.8%) mainly formed in the interstices between filaments. The additive extrusion process was thus shown to retain the intrinsic high performance of the material
- …