A comparison of matrix methods for calculating eigenvalues in acoustically lined ducts

Three approximate methods - finite differences, weighted residuals, and finite elements - were used to solve the eigenvalue problem which arises in finding the acoustic modes and propagation constants in an absorptively lined two-dimensional duct without airflow. The matrix equations derived for each of these methods were solved for the eigenvalues corresponding to various values of wall impedance. Two matrix orders, 20 x 20 and 40 x 40, were used. The cases considered included values of wall admittance for which exact eigenvalues were known and for which several nearly equal roots were present. Ten of the lower order eigenvalues obtained from the three approximate methods were compared with solutions calculated from the exact characteristic equation in order to make an assessment of the relative accuracy and reliability of the three methods. The best results were given by the finite element method using a cubic polynomial. Excellent accuracy was consistently obtained, even for nearly equal eigenvalues, by using a 20 x 20 order matrix

JPL Energy Consumption Program (ECP) documentation: A computer model simulating heating, cooling and energy loads in buildings

The engineering manual provides a complete companion documentation about the structure of the main program and subroutines, the preparation of input data, the interpretation of output results, access and use of the program, and the detailed description of all the analytic, logical expressions and flow charts used in computations and program structure. A numerical example is provided and solved completely to show the sequence of computations followed. The program is carefully structured to reduce both user's time and costs without sacrificing accuracy. The user would expect a cost of CPU time of approximately $5.00 per building zone excluding printing costs. The accuracy, on the other hand, measured by deviation of simulated consumption from watt-hour meter readings, was found by many simulation tests not to exceed + or - 10 percent margin

Endoscopic Shearography and Thermography Methods for Nondestructive Evaluation of Lined Pressure Vessels

The goal of this research effort was the development of methods for shearography and thermography inspection of coatings, bonds, or laminates inside rocket fuel or oxidizer tanks, fuel lines, and other closed structures. The endoscopic methods allow imaging and inspection inside cavities which are traditionally inaccessible with shearography or thermography cameras. The techniques are demonstrated and suggestions for practical application are made in this report. Drawings of the experimental setups, detailed procedures, and experimental data are included

Thermal Excitation System for Shearography (TESS)

One of the most convenient and effective methods of stressing a part or structure for shearographic evaluation is thermal excitation. This technique involves heating the part, often convectively with a heat gun, and then monitoring with a shearography device the deformation during cooling. For a composite specimen, unbonds, delaminations, inclusions, or matrix cracking will deform during cooling differently than other more structurally sound regions and thus will appear as anomalies in the deformation field. However, one of the difficulties that cause this inspection to be dependent on the operator experience is the conventional heating process. Fanning the part with a heat gun by hand introduces a wide range of variability from person to person and from one inspection to the next. The goal of this research effort was to conduct research in the methods of thermal excitation for shearography inspection. A computerized heating system was developed for inspection of 0.61 m (24 in.) square panels. The Thermal Excitation System for Shearography (TESS) provides radiant heating with continuous digital measurement of the surface temperature profile to ensure repeatability. The TESS device functions as an accessory to any electronic shearography device

Probability of detection of defects in coatings with electronic shearography

The goal of this research was to utilize statistical methods to evaluate the probability of detection (POD) of defects in coatings using electronic shearography. The coating system utilized in the POD studies was to be the paint system currently utilized on the external casings of the NASA space transportation system reusable solid rocket motor boosters. The population of samples was to be large enough to determine the minimum defect size for 90-percent POD of 95-percent confidence POD on these coatings. Also, the best methods to excite coatings on aerospace components to induce deformations for measurement by electronic shearography were to be determined

On a Calculus-based Statistics Course for Life Science Students

The choice of pedagogy in statistics should take advantage of the quantitative capabilities and scientific background of the students. In this article, we propose a model for a statistics course that assumes student competency in calculus and a broadening knowledge in biology. We illustrate our methods and practices through examples from the curriculum

Communications Biophysics

Contains research objectives, summary of research and reports on two research projects.National Institutes of Health (Grant 5 PO1 GM-14940-02)Joint Services Electronics Programs (U. S. Army, U.S. Navy, and U. S. Air Force) under Contract DA 28-043-AMC-02536(E)National Aeronautics and Space Administration (Grant NGL 22-009-304)National Institutes of Health (Grant 5 TO1 GM-01555-02)National Institutes of Health (Grant NB-08082-01

Correlations, Causes and the Logic of Obscuration: Donor Shaping of Dominant Narratives in Indonesia's Irrigation Development

This article analyses policy trends in Indonesian irrigation, particularly during the last five decades, from the perspective of dominant narratives, as authored, suggested and pushed by international donors. It argues that international donors' adherence to ‘deferred maintenance’ as the core element of irrigation policy problem framing does not match with farmers' and the irrigation agency staff perceptions and practices. The logic of obscuration and the discursive manoeuvers that maintain it are analysed. The article concludes that there is space for more profound conceptual contestation and for alternative actions pathways even within the ‘dominant paradigm’ to address management problems more effectively

Conceptualising Social Housing within the Wider Housing Market: A Vacancy Chain Model

There have been increasing calls for studies of housing systems that are more integrative and pluralistic in nature. Understanding the relationship of social housing systems to the wider housing market remains a key challenge. The mobility of households and the structural configuration of supply are both of importance, demanding methods able to reconcile both. This paper propounds vacancy chain models as offering significant potential in this regard, allowing policy analysis and options appraisal to be built on more dynamic conceptualisations of housing systems. The theoretical basis for vacancy chain models is developed before an account is given of a model developed of the Bradford (UK) social rented sector. The results suggest that social renting is very closely linked to the wider housing market and consequently the impacts of policy and investment may be felt beyond the sector. Observations on the future development of vacancy chain models are offered