121 research outputs found

    Catalytic co-pyrolysis of oil palm trunk and polypropylene with Ni–Mo/TiO2 and Ni/Al2O3: Oil composition and mechanism

    Get PDF
    Pyrolysis oil from oil palm biomass can be a sustainable alternative to fossil fuels and the precursor for synthesizing petrochemical products due to its carbon-neutral properties and low sulfur and nitrogen content. This work investigated the effect of applying mesoporous acidic catalysts, Ni–Mo/TiO2 and Ni/Al2O3, in a catalytic co-pyrolysis of oil palm trunk (OPT) and polypropylene (PP) from 500 to 700 °C. The obtained oil yields varied between 12.67 and 19.50 wt.% and 12.33–17.17 wt.% for Ni–Mo/TiO2 and Ni/Al2O3, respectively. The hydrocarbon content in oil significantly increased up to 54.07–58.18% and 37.28–68.77% after adding Ni–Mo/TiO2 and Ni/Al2O3, respectively. The phenolic compounds content was substantially reduced to 8.46–20.16% for Ni–Mo/TiO2 and 2.93–14.56% for Ni/Al2O3. Minor reduction in oxygenated compounds was noticed from catalytic co-pyrolysis, though the parametric effects of temperature and catalyst type remain unclear. The enhanced deoxygenation and cracking of phenolic and oxygenated compounds and the PP decomposition resulted in increased hydrocarbon production in oil during catalytic co-pyrolysis. Catalyst addition also promoted the isomerization and oligomerization reactions, enhancing the formation of cyclic relative to aliphatic hydrocarbon

    Association of change in daily step count over five years with insulin sensitivity and adiposity: population based cohort study

    Get PDF
    Objectives: To investigate the association between change in daily step count and both adiposity and insulin sensitivity and the extent to which the association between change in daily step count and insulin sensitivity may be mediated by adiposity. Design: Population based cohort study. Setting: Tasmania, Australia. Participants: 592 adults (men (n=267), mean age 51.4 (SD 12.2) years; women (n=325), mean age 50.3 (12.3) years) who participated in the Tasmanian component of the national AusDiab Study in 2000 and 2005. Main outcome measures: Body mass index, waist to hip ratio, and HOMA insulin sensitivity at follow-up in 2005. Results: Over the five year period, the daily step count decreased for 65% (n=382) of participants. Having a higher daily step count in 2005 than in 2000 was independently associated with lower body mass index (0.08 (95% confidence interval 0.04 to 0.12) lower per 1000 steps), lower waist to hip ratio (0.15 (0.07 to 0.23) lower), and greater insulin sensitivity (1.38 (0.14 to 2.63) HOMA units higher) in 2005. The mean increase in HOMA units fell to 0.34 (-0.79 to 1.47) after adjustment for body mass index in 2005. Conclusions: Among community dwelling, middle aged adults, a higher daily step count at five year follow-up than at baseline was associated with better insulin sensitivity. This effect seems to be largely mediated through lower adiposity

    Dynamic analysis and design of a semiconductor supply chain: a control engineering approach

    Get PDF
    The combined make-to-stock and make-to-order (MTS-MTO) supply chain is well-recognised in the semiconductor industry in order to find a competitive balance between agility, including customer responsiveness and minimum reasonable inventory, to achieve cost efficiency while maintaining customer service levels. Such a hybrid MTS-MTO supply chain may suffer from the bullwhip effect, but few researchers have attempted to understand the dynamic properties of such a hybrid system. We utilise a model of the Intel supply chain to analytically explore the underlying mechanisms of bullwhip generation and compare its dynamic performance to the well-known Inventory and Order-Based Production Control System (IOBPCS) archetype. Adopting a control engineering approach, we find that the feedforward forecasting compensation in the MTO element plays a major role in the degree of bullwhip and the Customer Order Decoupling Point (CODP) profoundly impacts both the bullwhip effect and the inventory variance in the MTS part. Thus, managers should carefully tune the CODP inventory correction and balance the benefit between CODP inventory and bullwhip costs in hybrid MTS-MTO supply chains

    North or south? Phylogenetic and biogeographic origins of a globally distributed avian clade

    Get PDF
    Establishing phylogenetic relationships within a clade can help to infer ancestral origins and indicate how widespread species reached their current biogeographic distributions. The small plovers, genus Charadrius, are cosmopolitan shorebirds, distributed across all continents except Antarctica. Here we present a global, species-level molecular phylogeny of this group based on four nuclear (ADH5, FIB7, MYO2 and RAG1) and two mitochondrial (COI and ND3) genes, and use the phylogeny to examine the biogeographic origin of the genus. A Bayesian multispecies coalescent approach identified two major clades (CRD I and CRD II) within the genus. Clade CRD I contains three species (Thinornis novaeseelandiae, Thinornis rubricollis and Eudromias morinellus), and CRD II one species (Anarhynchus frontalis), that were previously placed outside the Charadrius genus. In contrast to earlier work, ancestral area analyses using parsimony and Bayesian methods supported an origin of the Charadrius plovers in the Northern hemisphere. We propose that major radiations in this group were associated with shifts in the range of these ancestral plover species, leading to colonisation of the Southern hemisphere

    Soluble forms of tau are toxic in Alzheimer's disease

    Get PDF
    Accumulation of neurofibrillary tangles (NFT), intracellular inclusions of fibrillar forms of tau, is a hallmark of Alzheimer Disease. NFT have been considered causative of neuronal death, however, recent evidence challenges this idea. Other species of tau, such as soluble misfolded, hyperphosphorylated, and mislocalized forms, are now being implicated as toxic. Here we review the data supporting soluble tau as toxic to neurons and synapses in the brain and the implications of these data for development of therapeutic strategies for Alzheimer’s disease and other tauopathies

    Centrilobular emphysema and coronary artery calcification: Mediation analysis in the SPIROMICS cohort

    Get PDF
    Background: Chronic obstructive pulmonary disease (COPD) is associated with a two-to-five fold increase in the risk of coronary artery disease independent of shared risk factors. This association is hypothesized to be mediated by systemic inflammation but this link has not been established. Methods: We included 300 participants enrolled in the SPIROMICS cohort, 75 each of lifetime non-smokers, smokers without airflow obstruction, mild-moderate COPD, and severe-very severe COPD. We quantified emphysema and airway disease on computed tomography, characterized visual emphysema subtypes (centrilobular and paraseptal) and airway disease, and used the Weston visual score to quantify coronary artery calcification (CAC). We used the Sobel test to determine whether markers of systemic inflammation mediated a link between spirometric and radiographic features of COPD and CAC. Results: FEV 1 /FVC but not quantitative emphysema or airway wall thickening was associated with CAC (p = 0.036), after adjustment for demographics, diabetes mellitus, hypertension, statin use, and CT scanner type. To explain this discordance, we examined visual subtypes of emphysema and airway disease, and found that centrilobular emphysema but not paraseptal emphysema or bronchial thickening was independently associated with CAC (p = 0.019). MMP3, VCAM1, CXCL5 and CXCL9 mediated 8, 8, 7 and 16% of the association between FEV 1 /FVC and CAC, respectively. Similar biomarkers partially mediated the association between centrilobular emphysema and CAC. Conclusions: The association between airflow obstruction and coronary calcification is driven primarily by the centrilobular subtype of emphysema, and is linked through bioactive molecules implicated in the pathogenesis of atherosclerosis. Trial Registration: ClinicalTrials.gov: Identifier: NCT01969344

    Factors Associated with Revision Surgery after Internal Fixation of Hip Fractures

    Get PDF
    Background: Femoral neck fractures are associated with high rates of revision surgery after management with internal fixation. Using data from the Fixation using Alternative Implants for the Treatment of Hip fractures (FAITH) trial evaluating methods of internal fixation in patients with femoral neck fractures, we investigated associations between baseline and surgical factors and the need for revision surgery to promote healing, relieve pain, treat infection or improve function over 24 months postsurgery. Additionally, we investigated factors associated with (1) hardware removal and (2) implant exchange from cancellous screws (CS) or sliding hip screw (SHS) to total hip arthroplasty, hemiarthroplasty, or another internal fixation device. Methods: We identified 15 potential factors a priori that may be associated with revision surgery, 7 with hardware removal, and 14 with implant exchange. We used multivariable Cox proportional hazards analyses in our investigation. Results: Factors associated with increased risk of revision surgery included: female sex, [hazard ratio (HR) 1.79, 95% confidence interval (CI) 1.25-2.50; P = 0.001], higher body mass index (fo
    • …
    corecore