438 research outputs found
Consistency and asymptotic normality of least squares estimates used in linear systems identification
AbstractLeast squares estimation of the parameters of a single input-single output linear autonomous system is considered where both plant noise and observation noise are present. It is shown that under fairly general conditions the estimates converge almost surely to the true system parameters and that the estimates are asymptotically normal
Nonnegative idempotent matrices and the minus partial order
AbstractWe describe the structure of nonnegative matrices dominated by a nonnegative idempotent matrix under the minus order
Flutter and forced response of mistuned rotors using standing wave analysis
A standing wave approach is applied to the analysis of the flutter and forced response of tuned and mistuned rotors. The traditional traveling wave cascade airforces are recast into standing wave arbitrary motion form using Pade approximants, and the resulting equations of motion are written in the matrix form. Applications for vibration modes, flutter, and forced response are discussed. It is noted that the standing wave methods may prove to be more versatile for dealing with certain applications, such as coupling flutter with forced response and dynamic shaft problems, transient impulses on the rotor, low-order engine excitation, bearing motion, and mistuning effects in rotors
phosphorus and potassium fertilizer effects on alfalfa and soil in a non limited soil
Fertilization strategies for high-yielding alfalfa (Medicago sativa L.) should take in account the increase in soil nutritional status that occurred during the last decades in areas with intensive agricultural use. A field study was conducted at the University of Padova, northeastern Italy, to determine the response of alfalfa yield and nutritive value to various combinations of P and K rates in a soil lacking nutrient deficiency. Alfalfa cultivar Delta was seeded in March 2005 on a silt loam soil having 38 mg kg -1 available P and 178 mg kg -1 exchangeable K. Nine treatments deriving from the combination of three P fertilization rates (0, 100, and 200 kg ha -1 P 2 O 5 ) and three K rates (0, 300, and 600 kg ha -1 K 2 O) were compared in a randomized complete block design. Plots were harvested at bud stage during three growing seasons (2005-2007) and dry matter (DM) yield, forage nutritive value, P and K contents, canopy height, and stem density were measured at each harvest. Soil samples were collected at the end of the research period for determination of available P and exchangeable K. The results demonstrated that P application had no impact on yield and did not interact with K in determining productivity, while K had a positive effect on yield. However, the 300 kg ha -1 K 2 O rate appeared sufficient to maximize yield, without adverse effects on the forage nutritive value. Data from soil analyses showed that alfalfa has a high K uptake even when it is fertilized at high rates
An efficient algorithm to calculate intrinsic thermoelectric parameters based on Landauer approach
The Landauer approach provides a conceptually simple way to calculate the
intrinsic thermoelectric (TE) parameters of materials from the ballistic to the
diffusive transport regime. This method relies on the calculation of the number
of propagating modes and the scattering rate for each mode. The modes are
calculated from the energy dispersion (E(k)) of the materials which require
heavy computation and often supply energy relation on sparse momentum (k)
grids. Here an efficient method to calculate the distribution of modes (DOM)
from a given E(k) relationship is presented. The main features of this
algorithm are, (i) its ability to work on sparse dispersion data, and (ii)
creation of an energy grid for the DOM that is almost independent of the
dispersion data therefore allowing for efficient and fast calculation of TE
parameters. The inclusion of scattering effects is also straight forward. The
effect of k-grid sparsity on the compute time for DOM and on the sensitivity of
the calculated TE results are provided. The algorithm calculates the TE
parameters within 5% accuracy when the K-grid sparsity is increased up to 60%
for all the dimensions (3D, 2D and 1D). The time taken for the DOM calculation
is strongly influenced by the transverse K density (K perpendicular to
transport direction) but is almost independent of the transport K density
(along the transport direction). The DOM and TE results from the algorithm are
bench-marked with, (i) analytical calculations for parabolic bands, and (ii)
realistic electronic and phonon results for .Comment: 16 Figures, 3 Tables, submitted to Journal of Computational
electronic
Exploring morphological correlations among H2CO, 12CO, MSX and continuum mappings
There are relatively few H2CO mappings of large-area giant molecular cloud
(GMCs). H2CO absorption lines are good tracers for low-temperature molecular
clouds towards star formation regions. Thus, the aim of the study was to
identify H2CO distributions in ambient molecular clouds. We investigated
morphologic relations among 6-cm continuum brightness temperature (CBT) data
and H2CO (111-110; Nanshan 25-m radio telescope), 12CO (1--0; 1.2-m CfA
telescope) and midcourse space experiment (MSX) data, and considered the impact
of background components on foreground clouds. We report simultaneous 6-cm H2CO
absorption lines and H110\alpha radio recombination line observations and give
several large-area mappings at 4.8 GHz toward W49 (50'\times50'), W3
(70'\times90'), DR21/W75 (60'\times90') and NGC2024/NGC2023 (50'\times100')
GMCs. By superimposing H2CO and 12CO contours onto the MSX color map, we can
compare correlations. The resolution for H2CO, 12CO and MSX data was about 10',
8' and 18.3", respectively. Comparison of H2CO and 12CO contours, 8.28-\mu m
MSX colorscale and CBT data revealed great morphological correlation in the
large area, although there are some discrepancies between 12CO and H2CO peaks
in small areas. The NGC2024/NGC2023 GMC is a large area of HII regions with a
high CBT, but a H2CO cloud to the north is possible against the cosmic
microwave background. A statistical diagram shows that 85.21% of H2CO
absorption lines are distributed in the intensity range from -1.0 to 0 Jy and
the \Delta V range from 1.206 to 5 km/s.Comment: 18 pages, 22 figures, 5 tables. Accepted to be published in
Astrophysics and Space Scienc
From thermal rectifiers to thermoelectric devices
We discuss thermal rectification and thermoelectric energy conversion from
the perspective of nonequilibrium statistical mechanics and dynamical systems
theory. After preliminary considerations on the dynamical foundations of the
phenomenological Fourier law in classical and quantum mechanics, we illustrate
ways to control the phononic heat flow and design thermal diodes. Finally, we
consider the coupled transport of heat and charge and discuss several general
mechanisms for optimizing the figure of merit of thermoelectric efficiency.Comment: 42 pages, 22 figures, review paper, to appear in the Springer Lecture
Notes in Physics volume "Thermal transport in low dimensions: from
statistical physics to nanoscale heat transfer" (S. Lepri ed.
Grain Surface Models and Data for Astrochemistry
AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of âŒ25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions
- âŠ