86 research outputs found
Origins of the Ambient Solar Wind: Implications for Space Weather
The Sun's outer atmosphere is heated to temperatures of millions of degrees,
and solar plasma flows out into interplanetary space at supersonic speeds. This
paper reviews our current understanding of these interrelated problems: coronal
heating and the acceleration of the ambient solar wind. We also discuss where
the community stands in its ability to forecast how variations in the solar
wind (i.e., fast and slow wind streams) impact the Earth. Although the last few
decades have seen significant progress in observations and modeling, we still
do not have a complete understanding of the relevant physical processes, nor do
we have a quantitatively precise census of which coronal structures contribute
to specific types of solar wind. Fast streams are known to be connected to the
central regions of large coronal holes. Slow streams, however, appear to come
from a wide range of sources, including streamers, pseudostreamers, coronal
loops, active regions, and coronal hole boundaries. Complicating our
understanding even more is the fact that processes such as turbulence,
stream-stream interactions, and Coulomb collisions can make it difficult to
unambiguously map a parcel measured at 1 AU back down to its coronal source. We
also review recent progress -- in theoretical modeling, observational data
analysis, and forecasting techniques that sit at the interface between data and
theory -- that gives us hope that the above problems are indeed solvable.Comment: Accepted for publication in Space Science Reviews. Special issue
connected with a 2016 ISSI workshop on "The Scientific Foundations of Space
Weather." 44 pages, 9 figure
Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg
© 2018, The Author(s). High-pressure torsion (HPT) processing was applied to cast pure magnesium, and the effects of the deformation on the microstructure, hardness, tensile properties and corrosion resistance were evaluated. The microstructures of the processed samples were examined by electron backscatter diffraction, and the mechanical properties were determined by Vickers hardness and tensile testing. The corrosion resistance was studied using electrochemical impedance spectroscopy in a 3.5% NaCl solution. The results show that HPT processing effectively refines the grain size of Mg from millimeters in the cast structure to a few micrometers after processing and also creates a basal texture on the surface. It was found that one or five turns of HPT produced no significant difference in the grain size of the processed Mg and the hardness was a maximum after one turn due to recovery in some grains. Measurements showed that the yield strength of the cast Mg increased by about seven times whereas the corrosion resistance was not significantly affected by the HPT processing
Molecular and functional variation in iPSC-derived sensory neurons
Induced pluripotent stem cells (iPSCs), and cells derived from them, have become key tools for modeling biological processes, particularly in cell types that are difficult to obtain from living donors. Here we present a map of regulatory variants in iPSC-derived neurons, based on 123 differentiations of iPSCs to a sensory neuronal fate. Gene expression was more variable across cultures than in primary dorsal root ganglion, particularly for genes related to nervous system development. Using single-cell RNA-sequencing, we found that the number of neuronal versus contaminating cells was influenced by iPSC culture conditions before differentiation. Despite high differentiation-induced variability, our allele-specific method detected thousands of quantitative trait loci (QTLs) that influenced gene expression, chromatin accessibility, and RNA splicing. On the basis of these detected QTLs, we estimate that recall-by-genotype studies that use iPSC-derived cells will require cells from at least 20-80 individuals to detect the effects of regulatory variants with moderately large effect sizes
Pharmacological reversal of a pain phenotype in iPSC-derived sensory neurons and patients with inherited erythromelalgia
In common with other chronic pain conditions, there is an unmet clinical need in the treatment of inherited erythromelalgia (IEM). TheSCN9Agene encoding the sodium channel Nav1.7 expressed in the peripheral nervous system plays a critical role in IEM. A gain-of-function mutation in this sodium channel leads to aberrant sensory neuronal activity and extreme pain, particularly in response to heat. Five patients with IEM were treated with a new potent and selective compound that blocked the Nav1.7 sodium channel resulting in a decrease in heat-induced pain in most of the patients. We derived induced pluripotent stem cell (iPSC) lines from four of five subjects and produced sensory neurons that emulated the clinical phenotype of hyperexcitability and aberrant responses to heat stimuli. When we compared the severity of the clinical phenotype with the hyperexcitability of the iPSC-derived sensory neurons, we saw a trend toward a correlation for individual mutations. The in vitro IEM phenotype was sensitive to Nav1.7 blockers, including the clinical test agent. Given the importance of peripherally expressed sodium channels in many pain conditions, our approach may have broader utility for a wide range of pain and sensory conditions
Pranlukast is a novel small molecule activator of the two-pore domain potassium channel TREK2
TREK2 (KCNK10, K2P10.1) is a two-pore domain potassium (K2P) channel and a potential target for the treatment of pain. Like the majority of the K2P superfamily, there is currently a lack of useful pharmacological tools to study TREK2. Here we present a strategy for identifying novel TREK2 activators. A cell-based thallium flux assay was developed and used to screen a library of drug-like molecules, from which we identified the CysLT1 antagonist Pranlukast as a novel activator of TREK2. This compound was selective for TREK2 versus TREK1 and showed no activity at TRAAK. Pranlukast was also screened against other members of the K2P superfamily. Several close analogues of Pranlukast and other CysLT1 antagonists were also tested for their ability to activate K2P channels. Consistent with previous work, structure activity relationships showed that subtle structural changes to these analogues completely attenuated the activation of TREK2, whereas for TREK1, analogues moved from activators to inhibitors. Pranlukast's activity was also confirmed using whole-cell patch clamp electrophysiology. Studies using mutant forms of TREK2 suggest Pranlukast does not bind in the K2P modulator pocket or the BL-1249 binding site. Pranlukast therefore represents a novel tool by which to study the mechanism of TREK2 activation
Ultrafine grained plates of Al-Mg-Si alloy obtained by Incremental Equal Channel Angular Pressing : microstructure and mechanical properties
In this study, an Al-Mg-Si alloy was processed using via Incremental Equal Channel Angular Pressing (I-ECAP) in order to obtain homogenous, ultrafine grained plates with low anisotropy of the mechanical properties. This was the first attempt to process an Al-Mg-Si alloy using this technique. Samples in the form of 3 mm-thick square plates were subjected to I-ECAP with the 90˚ rotation around the axis normal to the surface of the plate between passes. Samples were investigated first in their initial state, then after a single pass of I-ECAP and finally after four such passes. Analyses of the microstructure and mechanical properties demonstrated that the I-ECAP method can be successfully applied in Al-Mg-Si alloys. The average grain size decreased from 15 - 19 µm in the initial state to below 1 µm after four I-ECAP passes. The fraction of high angle grain boundaries in the sample subjected to four I-ECAP passes lay within 53-57 % depending on the examined plane. The mechanism of grain refinement in Al-Mg-Si alloy was found to be distinctly different from that in pure aluminium with the grain rotation being more prominent than the grain subdivision, which was attributed to lower stacking fault energy and the reduced mobility of dislocations in the alloy. The ultimate tensile strength increased more than twice, whereas the yield strength - more than threefold. Additionally, the plates processed by I-ECAP exhibited low anisotropy of mechanical properties (in plane and across the thickness) in comparison to other SPD processing methods, which makes them attractive for further processing and applications
Pharmacologically Reversible, Loss of Function Mutations in the tm2 and tm4 Inner Pore Helices of Trek-1 k2p Channels
A better understanding of the gating of TREK two pore domain potassium (K2P) channels and their activation by compounds such as the negatively charged activator, flufenamic acid (FFA) is critical in the search for more potent and selective activators of these channels. Currents through wild-type and mutated human K2P channels expressed in tsA201 cells were measured using whole-cell patch-clamp recordings in the presence and absence of FFA. Mutation of the TM2.6 residue of TREK-1 to a phenylalanine (G171F) and a similar mutation of TM4.6 (A286F) substantially reduced current through TREK-1 channels. In complementary experiments, replacing the natural F residues at the equivalent position in TRESK channels, significantly enhanced current. Known, gain of function mutations of TREK-1 (G137I, Y284A) recovered current through these mutated channels. This reduction in current could be also be reversed pharmacologically, by FFA. However, an appropriate length MTS (MethaneThioSulfonate) cross-linking reagent (MTS14) restricted the activation of TREK-1_A286C channels by repeated application of FFA. This suggests that the cross-linker stabilises the channel in a conformation which blunts FFA activation. Pharmacologically reversible mutations of TREK channels will help to clarify the importance of these channels in pathophysiological conditions such as pain and depression
Ultrafine-Grained Plates of Al-Mg-Si Alloy Obtained by Incremental Equal Channel Angular Pressing: Microstructure and Mechanical Properties
Non-LTE line transfer with spatially correlated turbulence: Fluctuation against average emergent radiation field
The increasing interest in using turbulence to explain anomalies observed in stellar spectral lines is discussed.
This turbulence occurs at a finite spatial scale, a key parameter. In our previous work on non-LTE radiation
transfer in the presence of a turbulent velocity field (Loucif & Magnan 1982), we calculated individual profiles representing intensity fluctuations around the averaged line shape for photon diffusion with complete redistribution in frequency (CFR), a function well-adapted to media where collisional excitations dominate. We now generalize the problem by accounting for partial redistribution in frequency (PFR). To show the effect of the spatial correlation in the velocity field on the emergent line profiles as well as the importance of fluctuations in the medium's optical properties against the average, exhaustive calculations of emergent non-LTE line profiles are performed in the frame of a systematic comparison between the two processes of redistribution for the three following cases: static medium, averaged turbulent medium, and deviation from the average. In all cases, we confirm the differences and similarities in CFR and PFR descriptions previously derived for static media. These results seem reasonable since light scattering occurs at the atomic level–a scale well below the macroscopic size of the turbulence scale length. In addition, pronounced differences in the emergent radiation field are obtained between the average case and the so-called deviation from average for both frequency redistribution functions. These systematic differences rule out classical treatment of line formation in turbulent fields that assume averaged media to model observations obtained over an exposure time shorter than the turbulent field time scale (). Beyond the different assumptions made to describe the non-LTE line formation in a turbulent medium, our model provides a simple and coherent description of realistic media applicable to different astrophysical observational backgrounds. For this purpose, a unified picture is proposed for the radiation field formation, invoking mainly the medium opacity, the turbulence correlation length, and the velocity. Observations of variable objects, or along extended lines of sights, allowing a high probability for such deviations to occur (e.g., quasars), are suitable for application of our model
- …