Serpentinization, Carbonation, and Metasomatism of Ultramafic Sequences in the Northern Apennine Ophiolite (NW Italy)

Fluid-rock interaction in ultramafic rocks considerably affects the chemical and isotopic composition of the oceanic lithosphere. We present a geochemical and petrological study of serpentinites and ophicalcites of the Northern Apennine ophiolite, Italy. This ophiolite sequence represents fragments of Jurassic oceanic lithosphere that have been denuded by low angle detachment faults, exposing peridotites on the ocean floor and triggering hydrothermal alteration. Seawater circulation is documented by (Jurassic) seawater-like 87Sr/86Sr values and δ13C values of 1.1–3.0‰ in carbonate veins of the ophicalcites. Bulk rock ophicalcites have low 87Sr/86Sr values of 0.70489–0.70599, elevated SiO2 contents, and talc druses filling calcite veins that record Si-metasomatism. In contrast, underlying serpentinites have 87Sr/86Sr values above Jurassic seawater values. Bulk rock δD and δ18O values of ophicalcites and serpentinites suggest interaction with an evolved seawater-derived and/or magmatic fluid. These chemical signatures result from a complex history of serpentinization, carbonation, and metasomatism. Multiphase water-rock interaction includes infiltration of basement-derived fluids during initial mantle upwelling within an opening ocean basin, followed by localized high-temperature fluid infiltration, extensive seawater circulation resulting in carbonation, and oxidation near the seawater-exposed surface, and finally, fluid-rock interaction with overlying mafic lithologies leading to Si-metasomatism. The studied sequence represents an excellent example of the evolution from serpentinite to ophicalcite during continuous uplift and exposure of ultramafic rocks on the seafloor and documents the complex hydrothermal evolution of ultramafic rocks associated with this process. The extensive chemical transformation of mantle peridotites likely has an impact on geochemical cycles and subduction zone processes

Role of hydrodynamic factors in controlling the formation and location of unconformity-related uranium deposits: insights from reactive-flow modeling

The role of hydrodynamic factors in controlling the formation and location of unconformity-related uranium (URU) deposits in sedimentary basins during tectonically quiet periods is investigated. A number of reactive-flow modeling experiments at the deposit scale were carried out by assigning different dip angles and directions to a fault and various permeabilities to hydrostratigraphic units). The results show that the fault dip angle and direction, and permeability of the hydrostratigraphic units govern the convection pattern, temperature distribution, and uranium mineralization. Avertical fault results in uranium mineralization at the bottom of the fault within the basement, while a dipping fault leads to precipitation of uraninite below the unconformity either away from or along the plane of the fault, depending on the fault permeability. A more permeable fault causes uraninite precipitates along the fault plane,whereas a less permeable one gives rise to the precipitation of uraninite away from it. No economic ore mineralization can form when either very low or very high permeabilities are assigned to the sandstone or basement suggesting that these units seem to have an optimal window of permeability for the formation of uranium deposits. Physicochemical parameters also exert an additional control in both the location and grade of URU deposits. These results indicate that the difference in size and grade of different URU deposits may result from variation in fluid flow pattern and physicochemical conditions, caused by the change in structural features and hydraulic properties of the stratigraphic units involved

Integrated Multi-Parameter Exploration Footprints of the Canadian Malartic Disseminated Au, McArthur River-Millennium Unconformity U, and Highland Valley Porphyry Cu Deposits: Preliminary Results from the NSERC-CMIC Mineral Exploration Footprints Research Network

Mineral exploration in Canada is increasingly focused on concealed and deeply buried targets, requiring more effective tools to detect large-scale ore-forming systems and to vector from their most distal margins to their high grade cores. A new generation of ore system models is required to achieve this. The Mineral Exploration Footprints Research Network is a consortium of 70 faculty, research associates, and students from 20 Canadian universities working with 30 mining, mineral exploration, and mining service providers to develop new approaches to ore system modelling based on more effective integration and visualization of multi-parameter geological-structural-mineralogical-lithogeochemical-petrophysical-geophysical exploration data. The Network is developing the next generation ore system models and exploration strategies at three sites based on integrated data visualization using self-consistent 3D Common Earth Models and geostatistical/machine learning technologies. Thus far over 60 footprint components and vectors have been identified at the Canadian Malartic stockwork-disseminated Au deposit, 20–30 at the McArthur-Millennium unconformity U deposits, and over 20 in the Highland Valley porphyry Cu system. For the first time, these are being assembled into comprehensive models that will serve as landmark case studies for data integration and analysis in the today’s challenging exploration environment

TABATA INTERVAL VS. ELLIPTICAL INTERVAL TOTAL WORK AND RER

Kayla Hamner, Cody Pace, Mitch Lawson, Troy Kyser. University of Central Missouri; e-mail: [email protected] Tabata interval training, a form of high intensity interval training (HIIT), has become increasingly popular in the past few years. Tabata targets the anaerobic endurance of individuals with a goal that short bursts of high intensity work will be beneficial. PURPOSE: The purpose of this study was to compare two different interval workouts, Tabata intervals and elliptical intervals, and determine which workout had a higher total work output and a higher overall anaerobic component. METHODS: Ten regularly active male students between the ages of 18 and 27 from the University of Central Missouri were recruited as subjects to perform two twenty minute interval workout sessions on two occasions separated by at least 3 days. Before beginning the workouts, the subjects performed a warm-up consisting of a ¼ mile jog and several dynamic stretches. The Tabata workout consisted of eight rounds of high-intensity exercises in a specific 20-seconds-on, 10-seconds-off interval work. The exercises performed were kettle bell swings, burpees, sprinting in place, split lunges, and lateral shuffling on a speed ladder. The elliptical interval workout was a preset computerized workout that was set on the 15th level of difficulty out of 20 with a rest level intensity of 3. Ventilatory gases were collected and analyzed to determine both total work and intensity. RESULTS: The results indicated that a tabata interval workout had a higher overall total work output (292.1 ± 51.7 kcals) than the elliptical interval workout (234.2 ±62.38 kcals). RER of the ten subjects were also higher when they performed the tabata workout (0.99 ±0.06) than they were during the elliptical workout (0.96 ±0.07). CONCLUSION: The hypothesis that the tabata interval workout would have a higher total work output and higher mean RER value compared to the elliptical interval workout was supported. Faculty Sponsor: Dr. Steve Burn

Comparison of diagenetic fluids in the Proterozoic Thelon and Athabasca Basins, Canada: implications for protracted fluid histories in stable intracratonic basins

International audienc

Zinc deposits and related mineralization of the Burketown mineral field, including the world-class Century Deposit, Northern Australia: Fluid inclusion and stable isotope evidence for basin fluid sources

The stratiform Century Zn-Pb deposit and the discordant Zn-Pb lode deposits of the Burketown mineral field, northern Australia, host ore and gangue minerals with primary fluid inclusions that have not been affected by the Isan orogeny, thus providing a unique opportunity to investigate the nature of the ore-forming brines. All of the deposits are hosted in shales and siltstones belonging to the Isa superbasin and comprise sphalerite, pyrite, carbonate, quartz, galena, minor chalcopyrite, and minor illite. According to Pb model ages, the main ore stage of mineralization at Century formed at I575 Ma, some 20 m.y. after deposition of the host shale sequence. Microthermometry on undeformed, primary fluid inclusions hosted in porous sphalerite shows that the Zn at Century was transported to the deposit by a homogeneous, Ca2+- and Na+-bearing brine with a salinity of 21.6 wt percent NaCl equiv. delta D-fluid of the fluid inclusion water ranges from -89 to -83 per mil, consistent with a basinal brine that evolved from meteoric water. Fluid inclusion homogenization temperatures range between 74 degrees and 125 degrees C, which are lower than the 120 degrees to 160 degrees C range calculated from vitrinite reflectance and illite crystallinity data from the deposit. This discrepancy indicates that mineralization likely formed at 50 to 85 Mpa, corresponding to a depth of 1,900 to 3,100 m. Transgressive galena-sphalerite veins that cut stratiform mineralization at Century and breccia-filled quartz-dolomite-sphalerite-galena veins in the discordant Zn-Pb lodes have Pb model ages between 1575 and 1485 Ma. Raman spectroscopy and microthermometry reveal that the primary fluid inclusions in these veins contain Ca2+, Na+. but they have lower salinities between 23 and 10 wt percent NaCl equiv and higher delta D-fluid values ranging from -89 to -61 per mil than fluid inclusions in porous sphalerite from Century. Fluid inclusion water from sphalerite in one of the lode deposits has delta O-18(fluid) values of 1.6 and 2.4 per mil, indistinguishable from delta O-18(fluid) values between -0.3 to +7.4 per mil calculated from the isotopic composition of coexisting quartz, dolomite, and illite. The trend toward lower salinities and higher delta D-fluid values relative to the earlier mineralizing fluids is attributed to mixing between the fluid that formed Century and a seawater-derived fluid from a different source. Based on seismic data from the Lawn Hill platform and paragenetic and geochemical results from the Leichhardt River fault trough to the south, diagenetic aquifers in the Underlying Calvert superbasin appear to have been the most likely sources for the fluids that formed Century and the discordant lode deposits. Paragenetically late sphalerite and calcite cut sphalerite, quartz, and dolomite in the lode deposits and contain Na+-dominated fluid inclusions with much lower salinities than their older counterparts. The isotopic composition of calcite also indicates delta O-18(fluid) from 3.3 to 10.7 per mil, which is larger than the range obtained from synmineralization minerals, supporting the idea that a unique fluid source was involved. The absolute timing of this event is unclear, but a plethora of Pb model, K-Ar, and Ar-40/Ar-39 ages between 1440 and 1300 Ma indicate that a significant volume of fluid was mobilized at this time. The deposition of the Roper superbasin from ca. 1492 +/- 4 Ma suggests that these late veins formed from fluids that may have been derived from aquifers in overlying sediments of the Roper superbasin. Clear, buck, and drusy quartz in veins unrelated to any form of Pb-Zn mineralization record the last major fluid event in the Burketown mineral field and form distinct outcrops and ridges in the district. Fluid inclusions in these veins indicate formation from a low-salinity, 300 degrees +/- 80 degrees C fluid. Temperatures approaching 300 degrees C recorded in organic matter adjacent to faults and at sequence boundaries correspond to K-Ar ages spanning 1300 to 1100 Ma, which coincides with regional hydrothermal activity in the northern Lawn Hill platform and the emplacement of the Lakeview Dolerite at the time of assemblage of the Rodinia supercontinent