Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys

The presented work is focused on the determination of elastic constants of selected alloys of the systems Ni-Ti and Ni-Ti-Cu with use of ultrasonic methods. Sample preparation was carried out using VIM in graphite crucible in combination with pouring into graphite mould. The prepared samples were appropriately heattreated, polished into the desired shape and subjected to measurement of density and then to ultrasonic measurements. In addition to conventional methods, such as mechanical tests, also less known methods are applied. Among the specific methods we can mention dynamic mechanical analysis, dynamic super microhardness measurement, electro acoustic resonance or ultrasonic test.The group of thus tested materials includes also Ti alloys

Leaching refuse after sphalerite mineral for extraction zinc and cobalt

The paper deals with a possibility of zinc and cobalt extraction from refuse after sphalerite mineral leaching. It contains theoretic analysis of hydrometallurgical processes. Practical part describes samples and their leaching in 10 % and 20 % sulphuric acid. In the end of the paper it is evaluated under which conditions the highest yield of zinc and cobalt from refuse after sulphide ore leaching is reached

Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties

The paper reports on the fabrication and mechanical properties of Ni3Al based alloy, which represents the most frequently used basic composition of nickel based intermetallic alloys for high temperature applications. The structure of the alloy was controlled through directional solidification. The samples had a multi-phase microstructure. The directionally solidified specimens were subjected to tensile tests with concurrent measurement of acoustic emission (AE). The specimens exhibited considerable room temperature ductility before fracture. During tensile testing an intensive AE was observed

The sensitivity of the vortex filament method to different reconnection models

We present a detailed analysis on the effect of using different algorithms to model the reconnection of vortices in quantum turbulence, using the thin-filament approach. We examine differences between four main algorithms for the case of turbulence driven by a counterflow. In calculating the velocity field we use both the local induction approximation (LIA) and the full Biot-Savart integral. We show that results of Biot-Savart simulations are not sensitive to the particular reconnection method used, but LIA results are.Comment: 9 pages, 9 figure

Epidermal Growth Factor–PEG Functionalized PAMAM-Pentaethylenehexamine Dendron for Targeted Gene Delivery Produced by Click Chemistry

Aim of this study was the site-specific conjugation of an epidermal growth factor (EGF)-polyethylene glycol (PEG) chain by click chemistry onto a poly(amido amine) (PAMAM) dendron, as a key step toward defined multifunctional carriers for targeted gene delivery. For this purpose, at first propargyl amine cored PAMAM dendrons with ester ends were synthesized. The chain terminal ester groups were then modified by oligoamines with different secondary amino densities. The oligoamine-modified PAMAM dendrons were well biocompatible, as demonstrated in cytotoxicity assays. Among the different oligoamine-modified dendrons, PAMAM-pentaethylenehexamine (PEHA) dendron polyplexes displayed the best gene transfer ability. Conjugation of PAMAM-PEHA dendron with PEG spacer was conducted via click reaction, which was performed before amidation with PEHA. The resultant PEG-PAMAM-PEHA copolymer was then coupled with EGF ligand. pDNA transfections in HuH-7 hepatocellular carcinoma cells showed a 10-fold higher efficiency with the polyplexes containing conjugated EGF as compared to the ligand-free ones, demonstrating the concept of ligand targeting. Overall gene transfer efficiencies, however, were moderate, suggesting that additional measures for overcoming subsequent intracellular bottlenecks in delivery have to be taken

Prediction of peptide and protein propensity for amyloid formation

Understanding which peptides and proteins have the potential to undergo amyloid formation and what driving forces are responsible for amyloid-like fiber formation and stabilization remains limited. This is mainly because proteins that can undergo structural changes, which lead to amyloid formation, are quite diverse and share no obvious sequence or structural homology, despite the structural similarity found in the fibrils. To address these issues, a novel approach based on recursive feature selection and feed-forward neural networks was undertaken to identify key features highly correlated with the self-assembly problem. This approach allowed the identification of seven physicochemical and biochemical properties of the amino acids highly associated with the self-assembly of peptides and proteins into amyloid-like fibrils (normalized frequency of β-sheet, normalized frequency of β-sheet from LG, weights for β-sheet at the window position of 1, isoelectric point, atom-based hydrophobic moment, helix termination parameter at position j+1 and ΔGº values for peptides extrapolated in 0 M urea). Moreover, these features enabled the development of a new predictor (available at http://cran.r-project.org/web/packages/appnn/index.html) capable of accurately and reliably predicting the amyloidogenic propensity from the polypeptide sequence alone with a prediction accuracy of 84.9 % against an external validation dataset of sequences with experimental in vitro, evidence of amyloid formation

Tree method for quantum vortex dynamics

We present a numerical method to compute the evolution of vortex filaments in superfluid helium. The method is based on a tree algorithm which considerably speeds up the calculation of Biot-Savart integrals. We show that the computational cost scales as Nlog{(N) rather than N squared, where $N$ is the number of discretization points. We test the method and its properties for a variety of vortex configurations, ranging from simple vortex rings to a counterflow vortex tangle, and compare results against the Local Induction Approximation and the exact Biot-Savart law.Comment: 12 pages, 10 figure

A note on the propagation of quantized vortex rings through a quantum turbulence tangle:energy transport or energy dissipation?

We investigate quantum vortex ring dynamics at scales smaller than the inter-vortex spacing in quantum turbulence. Through geometrical arguments and high-resolution numerical simulations, we examine the validity of simple estimates for the mean free path and the structure of vortex rings post-reconnection. We find that a large proportion of vortex rings remain coherent objects where approximately 75% of their energy is preserved. This leads us to consider the effectiveness of energy transport in turbulent tangles. Moreover, we show that in low density tangles, appropriate for the ultra-quantum regime, ring emission cannot be ruled out as an important mechanism for energy dissipation. However at higher vortex line densities, typically associated with the quasi-classical regime, loop emission is expected to make a negligible contribution to energy dissipation, even allowing for the fact that our work shows rings can survive multiple reconnection events. Hence the Kelvin wave cascade seems the most plausible mechanism leading to energy dissipatio

Derivation of a biomass proxy for dynamic analysis of whole genome metabolic models

A whole genome metabolic model (GEM) is essentially a reconstruction of a network of enzyme-enabled chemical reactions representing the metabolism of an organism, based on information present in its genome. Such models have been designed so that flux balance analysis (FBA) can be applied in order to analyse metabolism under steady state. For this purpose, a biomassfunctionisaddedtothesemodelsasanoverallindicatorofthemodel’s viability. Our objective is to develop dynamic models based on these FBA models in order to observe new and complex behaviours, including transient behaviour. There is however a major challenge in that the biomass function does not operate under dynamic simulation. An appropriate biomass function would enable the estimation under dynamic simulation of the growth of both wildtype and genetically modified bacteria under different, possibly dynamically changing growth conditions. Using data analytics techniques, we have developed a dynamic biomass function which acts as a faithful proxy for the FBA equivalent for a reduced GEM for E. coli. This involved consolidating data for reaction rates and metabolite concentrations generated under dynamic simulation with gold standard target data for biomass obtained by steady state analysis using FBA. It also led to a number of interesting insights regarding biomass fluxes for pairs of conditions. These findings were reproduced in our dynamic proxy function

Mapping the temporary and perennial character of whole river networks

Knowledge of the spatial distribution of temporary and perennial river channels in a whole catchment is important for effective integrated basin management and river biodiversity conservation. However, this information is usually not available or is incomplete. In this study, we present a statistically based methodology to classify river segments from a whole river network (Deva-Cares catchment, Northern Spain) as temporary or perennial. This method is based on an a priori classification of a subset of river segments as temporary or perennial, using field surveys and aerial images, and then running Random Forest models to predict classification membership for the rest of the river network. The independent variables and the river network were derived following a computer-based geospatial simulation of riverine landscapes. The model results show high values of overall accuracy, sensitivity, and specificity for the evaluation of the fitted model to the training and testing data set (?0.9). The most important independent variables were catchment area, area occupied by broadleaf forest, minimum monthly precipitation in August, and average catchment elevation. The final map shows 7525 temporary river segments (1012.5 km) and 3731 perennial river segments (662.5 km). A subsequent validation of the mapping results using River Habitat Survey data and expert knowledge supported the validity of the proposed maps. We conclude that the proposed methodology is a valid method for mapping the limits of flow permanence that could substantially increase our understanding of the spatial links between terrestrial and aquatic interfaces, improving the research, management, and conservation of river biodiversity and functioning.We would like to thank the Journal Editor and the three referees for their comments and suggestions, which have greatly improved the manuscript. This study was partly funded by the Spanish Ministry of Economy and Competitiveness as part of the RIVERLANDS (Ref: BIA-2012–33572) and HYDRA (Ref: BIA-2015–71197) projects. Alexia María González-Ferreras is supported by a predoctoral research grant (Ref: BES-2013–065770) from the Spanish Ministry of Economy and Competitiveness, and José Barquín was supported by a Ramon y Cajal grant (Ref: RYC-2011–08313) from the Spanish Ministry of Economy and Competitiveness. We would like to thank the Government of Cantabria, the Principado de Asturias and the forest guards of the study areas for providing useful information. We would also like to acknowledge the Interautonomic Consortium of the Picos de Europa National Park and the Biodiversity Foundation from the Ministry of Agriculture, Food and Environment, for their advice and project support. Finally, we would also like to thank all the people involved in the field data collection, and those who read an early draft of the manuscript and suggested several improvements. The data and the data sources used in this study are cited and explained in the text. Readers can obtain further information about the data supporting the analysis and conclusions by contacting the corresponding author