24,254 research outputs found
The Optimum Position of Water Heat Transfer Coils Downstream of a Radial Swirler in a 20kW Heater
A 76mm outlet diameter radial swirler with 8mm vane depth was investigated in a 140mm combustor diameter condensing 20 kW ultra-low NOx boiler. The aim was to show that small turbulent flames could achieve compact ultra-low NOx water heating. Low NOx was achieved using lean well mixed low flame temperature combustion with a 0.7 equivalence ratio (Ø). Thermal NOx formation was also minimised by cooling the flame downstream of the swirler outlet. A water cooled heat transfer coil was traversed into the flame to determine how close to the swirler exit the heat transfer could occur, without a major increase in the combustion inefficiency. This was shown to be 70mm from the radial swirler throat outlet. Rapid fuel and air mixing was achieved using fuel injection through the wall of the 76mm swirler outlet throat, assisted by a 41mm diameter outlet orifice at the exit of the 76mm internal diameter wall fuel injector. This created swirling flow with higher axial velocities and a more concentrated high turbulence region downstream of the orifice outlet. A 4 mb burner pressure loss was used, which is typical of domestic forced draught combustion systems. The air inlet temperature was 400K, which is typical of reverse air flow cooled combustion chambers at domestic water heater conditions. The strong swirling flow interaction with the heat exchanger coil give an 89% thermal efficiency with the front of the coil 70mm from the swirler outlet. The emissions measurements showed that the combustion inefficiency was below 0.1%, the CO/CO2 ratio <0.001 and the NOx emissions were 5ppm at 0% oxygen with the heat exchanger at 70mm from the radial swirler outlet. This design easily met the 2018 EU legislation for eco-design of domestic water heaters
Influence of Fuel Injection Location in a Small Radial Swirler Low NOₓ Combustor for Micro Gas Turbine Applications
The influence of fuel injection location in a low NOₓ (1) micro-gas turbine [MGT] in the ∼50kWe (kW electric) size range was investigated, for NG and propane, to extend the power turn down using a pilot fuel injector. The low NOx main combustor (1) was a radial swirler with vane passage fuel injection and had ultra-low NOₓ emissions of 3ppm at 15% O2 at 1800K with natural gas, NG at a combustion intensity of 11.2 MW/m2bara (MW thermal). This was a 40mm diameter outlet eight bladed radial swirler in a 76mm diameter combustor, investigated at 740K air temperature at atmospheric pressure. However, power turn down was poor and the present work was undertaken to determine the optimum position of pilot fuel injection that would enable leaner mixtures to be burned at low powers. Central injection of pilot fuel was investigated using 8 radial outward holes. This was compared with pilot fuel injected at the 76mm wall just downstream of the 40mm swirler outlet. It was show that the central injection pilot was poor with a worse weak extinction than for radial passage fuel injection. The 76mm outlet wall injection was much more successful as a pilot fuel location and had a weak extinction of 0.18Ø compared with 0.34Ø for vane passage fuel injection. NOₓ emissions were higher for wall fuel injection, but were still relatively low at 16ppm at 15% oxygen for natural gas. This indicates that wall fuel injection could be combined with vane passage fuel injection to improve the micro-gas turbine low NOₓ performance across the power range
The Zeroth Law of Thermodynamics and Volume-Preserving Conservative Dynamics with Equilibrium Stochastic Damping
We propose a mathematical formulation of the zeroth law of thermodynamics and
develop a stochastic dynamical theory, with a consistent irreversible
thermodynamics, for systems possessing sustained conservative stationary
current in phase space while in equilibrium with a heat bath. The theory
generalizes underdamped mechanical equilibrium: , with and respectively
representing phase-volume preserving dynamics and stochastic damping. The
zeroth law implies stationary distribution . We find an
orthogonality as a hallmark of the system. Stochastic
thermodynamics based on time reversal
is formulated: entropy
production ; generalized "heat" ,
being "internal energy", and "free
energy" never increases.
Entropy follows . Our formulation is shown to
be consistent with an earlier theory of P. Ao. Its contradistinctions to other
theories, potential-flux decomposition, stochastic Hamiltonian system with even
and odd variables, Klein-Kramers equation, Freidlin-Wentzell's theory, and
GENERIC, are discussed.Comment: 25 page
Detection of fraudulent campaigns on donation-based crowdfunding platforms using a combination of machine
In today’s world where acts of kindness are seldom and rare, there are still many people who are able and willing to help their fellow human beings. One such way of doing that is donating to a crowdfunding campaign. People in need of financial assistance describe their stories on a crowdfunding platform and generous people donate to these campaigns. Even in such a noble cause, there are malicious actors who post fake campaigns and misuse the donations made to the campaign. In this study, we propose a fraud detection method to classify a campaign as genuine or fake. We have collected the details of non-fraudulent campaigns from ww.GoFundMe.com and we are collecting details of fraudulent campaigns from www.GoFraudMe.com. We propose a combination of machine learning classifier and a rule-based classifier to classify a campaign as genuine or fake. We have based our rule-based classifier on theories in deception which uses cognitive load, certainty, emotion, and distancing strategy depicted in a text. We then aggregate the results of these two classifiers to label a campaign as genuine or fake. Fraudulent campaigns add up to $30M and hence their detection has significant practical use
Shear viscosity, instability and the upper bound of the Gauss-Bonnet coupling constant
We compute the dimensionality dependence of for charged black branes
with Gauss-Bonnet correction. We find that both causality and stability
constrain the value of Gauss-Bonnet coupling constant to be bounded by 1/4 in
the infinite dimensionality limit. We further show that higher dimensionality
stabilize the gravitational perturbation. The stabilization of the perturbation
in higher dimensional space-time is a straightforward consequence of the
Gauss-Bonnet coupling constant bound.Comment: 16 pages,3 figures+3 tables,typos corrected, published versio
- …