Additively manufactured heterogeneous substrates for three-dimensional control of local permittivity

The concept of using additive manufacturing as a method to construct heterogeneous substrates from a single building material via stereolithography is introduced. The dynamic variation of air cavities within the bulk material is used to control the effective permittivity of the host medium. The digitally driven layer process enables full three-dimensional variation of the local permittivity. The high resolution of stereolithography enables sub-millimetre control of air inclusion features. Measurements of the effective permittivity with different air fractions have been compared to analytical results

The need for biokineticists in the South African public health care system

Background: Noncommunicable diseases (NCDs) are increasingly prevalent within South Africa. Physical inactivity is a significant, independent and modifiable risk factor increasing the prevalence of NCDs.Discussion: The integration of physical activity programmes into the primary health care system through multidisciplinary platforms is thus advocated for and envisioned to be more cost-effective than current practices. However, currently within the primary health care setting of South Africa, there is an absence of health care professionals adequately equipped to develop and implement physical activity programmes. Biokineticists, whose scope of practice is to improve physical functioning and health through exercise as a modality, are ideally suited to developing and implementing physical activity programmes in the public sector. Yet despite their evident demand, the role of the biokineticist is not incorporated into the national public health care system.Conclusion: This short report calls firstly, for the inclusion of biokinetics into the public health care sector, and secondly, for the funding of multidisciplinary community health programmes supporting education, healthy eating and physical activity levels.Keywords: noncommunicable disease, physical activity, community health programme, primary health car

Young people's attitudes to religious diversity : quantitative approaches from social psychology and empirical theology

This essay discusses the design of the quantitative component of the ‘Young People’s Attitudes to Religious Diversity’ project, conceived by Professor Robert Jackson within the Warwick Religions and Education Research Unit, and presents some preliminary findings from the data. The quantitative component followed and built on the qualitative component within a mixed method design. The argument is advanced in seven steps: introducing the major sources of theory on which the quantitative approach builds from the psychology of religion and from empirical theology; locating the empirical traditions of research among young people that have shaped the study; clarifying the notions and levels of measurement employed in the study anticipating the potential for various forms of data analysis; discussing some of the established measures incorporated in the survey; defining the ways in which the sample was structured to reflect the four nations of the UK, and London; illustrating the potential within largely descriptive cross-tabulation forms of analysis; and illustrating the potential within more sophisticated multivariate analytic models

Predicting microbial water quality with models: Over-arching questions for managing risk in agricultural catchments

The application of models to predict concentrations of faecal indicator organisms (FIOs) in environmental systems plays an important role for guiding decision-making associated with the management of microbial water quality. In recent years there has been an increasing demand by policy-makers for models to help inform FIO dynamics in order to prioritise efforts for environmental and human-health protection. However, given the limited evidence-base on which FIO models are built relative to other agricultural pollutants (e.g. nutrients) it is imperative that the end-user expectations of FIO models are appropriately managed. In response, this commentary highlights four over-arching questions associated with: (i) model purpose; (ii) modelling approach; (iii) data availability; and (iv) model application, that must be considered as part of good practice prior to the deployment of any modelling approach to predict FIO behaviour in catchment systems. A series of short and longer-term research priorities are proposed in response to these questions in order to promote better model deployment in the field of catchment microbial dynamics

Multifunctional metal matrix composites with embedded printed electrical materials fabricated by Ultrasonic Additive Manufacturing

This work proposes a new method for the fabrication of Multifunctional Metal Matrix Composite (MMC) structures featuring embedded printed electrical materials through Ultrasonic Additive Manufacturing (UAM). Printed electrical circuitries combining conductive and insulating materials were directly embedded within the interlaminar region of UAM aluminium matrices to realise previously unachievable multifunctional composites. A specific surface flattening process was developed to eliminate the risk of short circuiting between the metal matrices and printed conductors, and simultaneously reduce the total thickness of the printed circuitry. This acted to improve the integrity of the UAM MMC’s and their resultant mechanical strength. The functionality of embedded printed circuitries was examined via four-point probe measurement. DualBeam Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) milling were used to investigate the microstructures of conductive materials to characterize the effect of UAM embedding energy whilst peel testing was used to quantify mechanical strength of MMC structures in combination with optical microscopy. Through this process, fully functioning MMC structures featuring embedded insulating and conductive materials were realised whilst still maintaining high peel resistances of ca. 70 N and linear weld densities of ca. 90%

Re-examining the relationship between audiometric profile and tinnitus pitch

Objective: We explored the relationship between audiogram shape and tinnitus pitch to answer questions arising from neurophysiological models of tinnitus: ‘Is the dominant tinnitus pitch associated with the edge of hearing loss?’ and ‘Is such a relationship more robust in people with narrow tinnitus bandwidth or steep sloping hearing loss?’ Design: A broken-stick fitting objectively quantified slope, degree and edge of hearing loss up to 16 kHz. Tinnitus pitch was characterized up to 12 kHz. We used correlation and multiple regression analyses for examining relationships with many potentially predictive audiometric variables. Study Sample: 67 people with chronic bilateral tinnitus (43 men and 24 women, aged from 22 to 81 years). Results: In this ample of 67 subjects correlation failed to reveal any relationship between the tinnitus pitch and the edge frequency. The tinnitus pitch generally fell within the area of hearing loss. The pitch of the tinnitus in a subset of subjects with a narrow tinnitus bandwidth (n = 23) was associated with the audiometric edge. Conclusions: Our findings concerning subjects with narrow tinnitus bandwidth suggest that this can be used as an a priori inclusion criterion. A large group of such subjects should be tested to confirm these results

Measurement of the B0-anti-B0-Oscillation Frequency with Inclusive Dilepton Events

The $B^0$-$\bar B^0$ oscillation frequency has been measured with a sample of 23 million \B\bar B pairs collected with the BABAR detector at the PEP-II asymmetric B Factory at SLAC. In this sample, we select events in which both B mesons decay semileptonically and use the charge of the leptons to identify the flavor of each B meson. A simultaneous fit to the decay time difference distributions for opposite- and same-sign dilepton events gives $\Delta m_d = 0.493 \pm 0.012{(stat)}\pm 0.009{(syst)}$ ps$^{-1}$.Comment: 7 pages, 1 figure, submitted to Physical Review Letter