623 research outputs found
Association mapping and marker-assisted selection of the lettuce dieback resistance gene Tvr1
Background: Lettuce (Lactuca saliva L.) is susceptible to dieback, a soilborne disease caused by two
viruses from the family Tombusviridae. Susceptibility to dieback is widespread in romaine and leaf-type
lettuce, while modern iceberg cultivars are resistant to this disease. Resistance in iceberg cultivars is
conferred by Tvr1 - a single, dominant gene that provides durable resistance. This study describes fine
mapping of the resistance gene, analysis of nucleotide polymorphism and linkage disequilibrium in the Tvr1
region, and development of molecular markers for marker-assisted selection.
Results: A combination of classical linkage mapping and association mapping allowed us to pinpoint the
location of the Tvr1 resistance gene on chromosomal linkage group 2. Nine molecular markers, based on
expressed sequence tags (EST), were closely linked to Tvr1 in the mapping population, developed from
crosses between resistant (Salinas and Salinas 88) and susceptible (Valmaine) cultivars. Sequencing of these
markers from a set of 68 cultivars revealed a relatively high level of nucleotide polymorphism (θ = 6.7 ×
10-3) and extensive linkage disequilibrium (r2 = 0.124 at 8 cM) in this region. However, the extent of linkage
disequilibrium was affected by population structure and the values were substantially larger when the
analysis was performed only for romaine (r2 = 0.247) and crisphead (r2 = 0.345) accessions. The association
mapping approach revealed that one of the nine markers (Cntg10192) in the Tvr1 region matched exactly
with resistant and susceptible phenotypes when tested on a set of 200 L. sativa accessions from all
horticultural types of lettuce. The marker-trait association was also confirmed on two accessions of
Lactuca serriola - a wild relative of cultivated lettuce. The combination of three single-nucleotide
polymorphisms (SNPs) at the Cntg10192 marker identified four haplotypes. Three of the haplotypes were
associated with resistance and one of them was always associated with susceptibility to the disease.
Conclusion: We have successfully applied high-resolution DNA melting (HRM) analysis to distinguish all
four haplotypes of the Cntg10192 marker in a single analysis. Marker-assisted selection for dieback
resistance with HRM is now an integral part of our breeding program that is focused on the development
of improved lettuce cultivars
Isolation of Putative Disease Resistance Gene Clones from Chickpea and Pigeonpea
Nucleotide binding sites conferring disease resistance were cloned from chickpea (Cicer arietinum) and pigeon pea (Cajanus cajan). The majority of amplified resistance gene candidates showed high homology to N (tobacco) and L6 (flax) resistance genes
Crop to wild introgression in lettuce: following the fate of crop genome segments in backcross populations
Background: After crop-wild hybridization, some of the crop genomic segments may become established in wild populations through selfing of the hybrids or through backcrosses to the wild parent. This constitutes a possible route through which crop (trans)genes could become established in natural populations. The likelihood of introgression of transgenes will not only be determined by fitness effects from the transgene itself but also by the crop genes linked to it. Although lettuce is generally regarded as self-pollinating, outbreeding does occur at a low frequency. Backcrossing to wild lettuce is a likely pathway to introgression along with selfing, due to the high frequency of wild individuals relative to the rarely occurring crop-wild hybrids. To test the effect of backcrossing on the vigour of inter-specific hybrids, Lactuca serriola, the closest wild relative of cultivated lettuce, was crossed with L. sativa and the F1 hybrid was backcrossed to L. serriola to generate BC1 and BC2 populations. Experiments were conducted on progeny from selfed plants of the backcrossing families (BC1S1 and BC2S1). Plant vigour of these two backcrossing populations was determined in the greenhouse under non-stress and abiotic stress conditions (salinity, drought, and nutrient deficiency).
Results: Despite the decreasing contribution of crop genomic blocks in the backcross populations, the BC1S1 and BC2S1 hybrids were characterized by a substantial genetic variation under both non-stress and stress conditions. Hybrids were identified that performed equally or better than the wild genotypes, indicating that two backcrossing events did not eliminate the effect of the crop genomic segments that contributed to the vigour of the BC1 and BC2 hybrids. QTLs for plant vigour under non-stress and the various stress conditions were detected in the two populations with positive as well as negative effects from the crop.
Conclusion: As it was shown that the crop contributed QTLs with either a positive or a negative effect on plant vigour, we hypothesize that genomic regions exist where transgenes could preferentially be located in order to mitigate their persistence in natural populations through genetic hitchhiking
QTLs for shelf life in lettuce co-locate with those for leaf biophysical properties but not with those for leaf developmental traits
Developmental and biophysical leaf characteristics that influence post-harvest shelf life in lettuce, an important leafy crop, have been examined. The traits were studied using 60 informative F9 recombinant inbed lines (RILs) derived from a cross between cultivated lettuce (Lactuca sativa cv. Salinas) and wild lettuce (L. serriola acc. UC96US23). Quantitative trait loci (QTLs) for shelf life co-located most closely with those for leaf biophysical properties such as plasticity, elasticity, and breakstrength, suggesting that these are appropriate targets for molecular breeding for improved shelf life. Significant correlations were found between shelf life and leaf size, leaf weight, leaf chlorophyll content, leaf stomatal index, and epidermal cell number per leaf, indicating that these pre-harvest leaf development traits confer post-harvest properties. By studying the population in two contrasting environments in northern and southern Europe, the genotype by environment interaction effects of the QTLs relevant to leaf development and shelf life were assessed. In total, 107 QTLs, distributed on all nine linkage groups, were detected from the 29 traits. Only five QTLs were common in both environments. Several areas where many QTLs co-located (hotspots) on the genome were identified, with relatively little overlap between developmental hotspots and those relating to shelf life. However, QTLs for leaf biophysical properties (breakstrength, plasticity, and elasticity) and cell area correlated well with shelf life, confirming that the ideal ideotype lettuce should have small cells with strong cell walls. The identification of QTLs for leaf development, strength, and longevity will lead to a better understanding of processability at a genetic and cellular level, and allow the improvement of salad leaf quality through marker-assisted breeding
A microsatellite marker for yellow rust resistance in wheat
Bulk segregant analysis (BSA) was used to identify molecular markers associated with yellow rust disease resistance in wheat (Triticum aestivum L.). DNAs isolated from the selected yellow rust tolerant and susceptible F-2 individuals derived from a cross between yellow rust resistant and susceptible wheat genotypes were used to established a "tolerant" and a "susceptible" DNA pool. The BSA was then performed on these DNA pools using 230 markers that were previously mapped onto the individual wheat chromosomes. One of the SSR markers (Xgwm382) located on chromosome group 2 (A, B, D genomes) was present in the resistant parent and the resistant bulk but not in the susceptible parent and the susceptible bulk, suggesting that this marker is linked to a yellow rust resistance gene. The presence of Xgwm382 was also tested in 108 additional wheat genotypes differing in yellow rust resistance. This analysis showed that 81% of the wheat genotypes known to be yellow rust resistant had the Xgwm382 marker, further suggesting that the presence of this marker correlates with yellow rust resistance in diverse wheat germplasm. Therefore, Xgwm382 could be useful for marker assisted selection of yellow rust resistances genotypes in wheat breeding programs
High resolution mapping of a novel late blight resistance gene Rpi-avll, from the wild Bolivian species Solanum avilesii
Both Mexico and South America are rich in Solanum species that might be valuable sources of resistance (R) genes to late blight (Phytophthora infestans). Here, we focus on an R gene present in the diploid Bolivian species S. avilesii. The genotype carrying the R gene was resistant to eight out of 10 Phytophthora isolates of various provenances. The identification of a resistant phenotype and the generation of a segregating population allowed the mapping of a single dominant R gene, Rpi-avl1, which is located in an R gene cluster on chromosome 11. This R gene cluster is considered as an R gene “hot spot”, containing R genes to at least five different pathogens. High resolution mapping of the Rpi-avl1 gene revealed a marker co-segregating in 3890 F1 individuals, which may be used for marker assisted selection in breeding programs and for further cloning of Rpi-avl
High-resolution genetic mapping with pooled sequencing
Background:
Modern genetics has been transformed by high-throughput sequencing. New experimental designs in model organisms involve analyzing many individuals, pooled and sequenced in groups for increased efficiency. However, the uncertainty from pooling and the challenge of noisy sequencing data demand advanced computational methods.
Results:
We present MULTIPOOL, a computational method for genetic mapping in model organism crosses that are analyzed by pooled genotyping. Unlike other methods for the analysis of pooled sequence data, we simultaneously consider information from all linked chromosomal markers when estimating the location of a causal variant. Our use of informative sequencing reads is formulated as a discrete dynamic Bayesian network, which we extend with a continuous approximation that allows for rapid inference without a dependence on the pool size. MULTIPOOL generalizes to include biological replicates and case-only or case-control designs for binary and quantitative traits.
Conclusions:
Our increased information sharing and principled inclusion of relevant error sources improve resolution and accuracy when compared to existing methods, localizing associations to single genes in several cases. MULTIPOOL is freely available at http://cgs.csail.mit.edu/multipool/ webcite.National Science Foundation (U.S.) (Graduate Research Fellowship Grant 0645960
Balancing Selection at the Tomato RCR3 Guardee Gene Family Maintains Variation in Strength of Pathogen Defense
Coevolution between hosts and pathogens is thought to occur between interacting molecules of both species. This results in the maintenance of genetic diversity at pathogen antigens (or so-called effectors) and host resistance genes such as the major histocompatibility complex (MHC) in mammals or resistance (R) genes in plants. In plant-pathogen interactions, the current paradigm posits that a specific defense response is activated upon recognition of pathogen effectors via interaction with their corresponding R proteins. According to the''Guard-Hypothesis,'' R proteins (the ``guards'') can sense modification of target molecules in the host (the ``guardees'') by pathogen effectors and subsequently trigger the defense response. Multiple studies have reported high genetic diversity at R genes maintained by balancing selection. In contrast, little is known about the evolutionary mechanisms shaping the guardee, which may be subject to contrasting evolutionary forces. Here we show that the evolution of the guardee RCR3 is characterized by gene duplication, frequent gene conversion, and balancing selection in the wild tomato species Solanum peruvianum. Investigating the functional characteristics of 54 natural variants through in vitro and in planta assays, we detected differences in recognition of the pathogen effector through interaction with the guardee, as well as substantial variation in the strength of the defense response. This variation is maintained by balancing selection at each copy of the RCR3 gene. Our analyses pinpoint three amino acid polymorphisms with key functional consequences for the coevolution between the guardee (RCR3) and its guard (Cf-2). We conclude that, in addition to coevolution at the ``guardee-effector'' interface for pathogen recognition, natural selection acts on the ``guard-guardee'' interface. Guardee evolution may be governed by a counterbalance between improved activation in the presence and prevention of auto-immune responses in the absence of the corresponding pathogen
The genome sequences of Arachis duranensis and Arachis ipaensis, the diploid ancestors of cultivated peanut.
Advances in Arachis genomics for peanut improvement
Peanut genomics is very challenging due to its inherent problem of genetic architecture. Blockage of gene flow from diploid wild relatives to the tetraploid; cultivated peanut, recent polyploidization combined with self pollination, and the narrow genetic base of the primary genepool have resulted in low genetic diversity that has remained a major bottleneck for genetic improvement of peanut. Harnessing the rich source of wild relatives has been negligible due to differences in ploidy level as well as genetic drag and undesirable alleles for low yield. Lack of appropriate genomic resources has severely hampered molecular breeding activities, and this crop remains among the less-studied crops. The last five years, however, have witnessed accelerated development of genomic resources such as development of molecular markers, genetic and physical maps, generation of expressed sequenced tags (ESTs), development of mutant resources, and functional genomics platforms that facilitate the identification of QTLs and discovery of genes associated with tolerance/resistance to abiotic and biotic stresses and agronomic traits. Molecular breeding has been initiated for several traits for development of superior genotypes. The genome or at least gene space sequence is expected to be available in near future and this will further accelerate use of biotechnological approaches for peanut improvement
- …