An evaluation of a refresher training intervention for HIV lay counsellors in Chongwe District, Zambia

To address a severe shortage of human resources for health, the Zambian Ministry of Health has begun to make use of lay counsellors for HIV counselling and testing. However, their skills and knowledge rarely have been reviewed or refreshed. We conducted a two-day refresher workshop for lay counsellors to review their performance and refresh their skills and knowledge. The objective of this study was to evaluate the refresher training intervention for HIV lay counsellors in the rural district of Chongwe in Zambia. The two-day refreshertraining workshop was held in November 2009. Twenty-five lay counsellors were selected by District Health Office and participated in the workshop. The workshop included: the opening, a pre-training exercise, lectures on quality assurance with regard to testing and safety precautions, lectures on counselling, filling the gap/Q&A session, and a post-training exercise. In both the pre- and post-trainingexercise, participants answered 25 true/false questions and tested 10 blood panel samples to demonstrate their knowledge and skill on HIV counselling and testing. The average overall knowledge test score  increased from 79% to 95% (p<0.001). At the baseline, knowledgetest scores in topic of standard precaution and post-exposure prophylaxis were relatively low (58%) but rose to 95% after the training (p<0.001). The per cent agreement of HIV testing by lay counsellors with reference laboratory was 99.2%. Participants’ knowledge was improved during the workshop and skill at HIV testing was found to remain at a high level of accuracy. Relatively weak knowledge of standard precautions and post-exposure prophylaxis suggests that lay counsellors are at risk of nosocomial infections, particularly in the absence of refresher training interventions. We conclude that the refresher training was effective for improving the knowledge and skills of lay counsellors and provided an opportunity to monitor their performance

Effectiveness and cost of an incentive-based intervention on food safety and income in "dibiteries" in Dakar, Senegal

BACKGROUND: Rapid urbanisation in Sub-Saharan African cities such as Dakar, Senegal, leads to proliferation of informal braised meat restaurants known as "dibiteries". Dibiteries do not often comply with minimal hygiene and food safety standards. The primary objective of this study was to assess the effectiveness and cost of a good hygiene practice intervention, identify factors that incentivize hygiene improvement and how that impacts on dibiteries' income. METHODS: A randomized controlled trial was carried out in Dakar dibiteries. The 120 random samples of braised meat were collected in three phases: (i) one-month pre-intervention, (ii) 2 months post-intervention, (iii) 10 months post-intervention. The trial comprised four groups of 10 dibiteries each: (a) (control) received no intervention, (b) a standardized training module, (c) a hygiene kit, (d) a training module and hygiene kit. Laboratory analysis of samples determined the total aerobic mesophilic flora (TAMF), thermotolerant coliforms (TC) and Staphylococcus aureus (SA). A questionnaire-based survey and focus group discussion were used to identify pre-intervention hygiene practices, and socioeconomic determinants of hygiene management in dibiteries post-intervention, respectively. RESULTS: Samples were found to be contaminated with TAMF, TC and SA. In phase 1, 27 and 13% of the samples contained TC and SA, respectively. In phase 2, no significant improvement of contamination rates was seen. In phase 3, microbiological quality of samples was significantly improved, with only 11.5% showing contamination with any of the bacterial species analysed (p < 0.1). Compared to the control group, only samples from dibiteries in group (b) had significantly reduced bacterial load in phase 3. The cost of intervention and hygiene improvement was estimated at 67 FCFA ($0.12) and 41 FCFA ($ 0.07) / day respectively and did not significantly impact on dibiterie profitability. Incentives to sustainably implement good hygiene practices were mainly linked to access to secure long-term workspaces. CONCLUSION: This intervention may have worked, but globally the results are mixed and not quite significant. However, continuous training in good hygiene practice and access to secure and sustainable infrastructure for dibiterie restaurants are the incentives necessary to achieve sustainable investments and behavioural change. We recommend further intervention refinement and testing other factors for promoting the adoption of good hygiene practices in the dibiteries in relation to consumers health risk

Consumer perception on purchase decision factors and health indicators related to the quality and safety of meat sold in dibiteries in Dakar, Senegal

Accelerated socio-economic and demographic changes have led to the transformation of eating habits in sub-Saharan African cities including Dakar, Senegal. The result is the proliferation of informal fast-food establishments, such as the 'dibiteries' serving braised sheep meat. However, owing to poor hygiene practices, consumption of dibiterie meat poses a public health concern. It was unclear how the dibiterie meat quality and safety were perceived among customers who define their own purchasing social norms. A total of 165 meat consumers were randomly selected and interviewed, from 165 dibiteries sampled by convenience in the Dakar region using a structured questionnaire. Results showed that purchase decisions were guided by trust in the salesperson's expertise, the taste of the product, perceived risk of meat contamination, tenderness, price, the nutritional value, the smell and the colour and freshness of the meat. The perceived quality and safety of dibiterie meat was expressed by the 'organoleptic quality', 'environment and service' and 'price and trust of the product's safety' factors. The majority of consumers (61%) were 'less concerned' about the safety of dibiterie meat, and the acceptable price range of the product was between $5.08 and$7.62. As this food product is gaining popularity in Dakar and the majority of our participating consumers do not show high levels of concern, we suggest stricter standards

Application of Numerical Newton-Raphson Method in Calculation of Emitter Water Discharge of Drip Irrigation System in “Mutis Cemerlang” Coffee Plantation

Based on the slope class, the shape of the area and the elevation of dry land in Nusa Tenggara, agricultural land in Noepesu Village is suitable for planting coffee plants with an agroforestry scheme. To overcome the problem of limited water, drip irrigation system technology can be applied. The use of drip irrigation as an agricultural technology in Noepesu village has been carried out by many farmer groups. Still, the installation process does not consider the pipe specifications (pipe length and pipe diameter) and the condition of agricultural land. This causes the service life of drip irrigation to be not long. If this continues, of course, it will increase system installation costs. To optimize service life, a hydraulics analysis method is needed for drip irrigation pipe network systems that take into account pipe specifications and agricultural land conditions.The hydraulics analysis of the drip irrigation network system determines the emitter’s water flow rate. The emitter flow rate forms a nonlinear equation known as the closed pipe equation. In the process of solving these equations, numerical methods can be used, specifically the Newton-Raphson method. This study focuses on applying the Newton-Raphson method to calculate the amount of water discharge from each emitter of the drip irrigation network system on the farmland of the Mutis Cemerlang Farmer Group in Noepesu Village. The drip irrigation system is designed with 250 nodes, 275 pipes, 26 loops, and 86 outlets divided into two sides, with the left side containing 84 outlets with one emitter and the right side containing 102 outlets with two emitters. The amount of water discharge for each emitter is 0,0008 ml/second≤Q≤2,6 ml/second for the left side and 0,001 ml/second≤Q≤1,1 ml/second for the right side, as determined by simulation calculations utilizing the Newton-Raphson method and Matlab software. The simulation results show that the amount of water discharge at each emitter is ideal in the first iteration because it has a discharge correction value (∆Q)≈0

Natural selection increases female fitness by reversing the exaggeration of a male sexually selected trait

This is the final version. Available on open access from Nature Research via the DOI in this recordData availability: The data that support the findings of this study are provided in Supplementary Data 1. This includes population mean trait values during and on completion of experimental evolution, fighting data, predation-mandible size data and the pedigree data. Source data are provided with this paper.Theory shows how sexual selection can exaggerate male traits beyond naturally selected optima and also how natural selection can ultimately halt trait elaboration. Empirical evidence supports this theory, but to our knowledge, there have been no experimental evolution studies directly testing this logic, and little examination of possible associated effects on female fitness. Here we use experimental evolution of replicate populations of broad-horned flour beetles to test for effects of sex-specific predation on an exaggerated sexually selected male trait (the mandibles), while also testing for effects on female lifetime reproductive success. We find that populations subjected to male-specific predation evolve smaller sexually selected mandibles and this indirectly increases female fitness, seemingly through intersexual genetic correlations we document. Predation solely on females has no effects. Our findings support fundamental theory, but also reveal unforseen outcomes—the indirect effect on females—when natural selection targets sex-limited sexually selected characters.Leverhulme TrustJapan Society for the Promotion of Scienc

Curvature fluctuations and Lyapunov exponent at Melting

We calculate the maximal Lyapunov exponent in constant-energy molecular dynamics simulations at the melting transition for finite clusters of 6 to 13 particles (model rare-gas and metallic systems) as well as for bulk rare-gas solid. For clusters, the Lyapunov exponent generally varies linearly with the total energy, but the slope changes sharply at the melting transition. In the bulk system, melting corresponds to a jump in the Lyapunov exponent, and this corresponds to a singularity in the variance of the curvature of the potential energy surface. In these systems there are two mechanisms of chaos -- local instability and parametric instability. We calculate the contribution of the parametric instability towards the chaoticity of these systems using a recently proposed formalism. The contribution of parametric instability is a continuous function of energy in small clusters but not in the bulk where the melting corresponds to a decrease in this quantity. This implies that the melting in small clusters does not lead to enhanced local instability.Comment: Revtex with 7 PS figures. To appear in Phys Rev

Big-Data-Driven Materials Science and its FAIR Data Infrastructure

This chapter addresses the forth paradigm of materials research -- big-data driven materials science. Its concepts and state-of-the-art are described, and its challenges and chances are discussed. For furthering the field, Open Data and an all-embracing sharing, an efficient data infrastructure, and the rich ecosystem of computer codes used in the community are of critical importance. For shaping this forth paradigm and contributing to the development or discovery of improved and novel materials, data must be what is now called FAIR -- Findable, Accessible, Interoperable and Re-purposable/Re-usable. This sets the stage for advances of methods from artificial intelligence that operate on large data sets to find trends and patterns that cannot be obtained from individual calculations and not even directly from high-throughput studies. Recent progress is reviewed and demonstrated, and the chapter is concluded by a forward-looking perspective, addressing important not yet solved challenges.Comment: submitted to the Handbook of Materials Modeling (eds. S. Yip and W. Andreoni), Springer 2018/201

Defining Developmental Potency and Cell Lineage Trajectories by Expression Profiling of Differentiating Mouse Embryonic Stem Cells

Biologists rely on morphology, function and specific markers to define the differentiation status of cells. Transcript profiling has expanded the repertoire of these markers by providing the snapshot of cellular status that reflects the activity of all genes. However, such data have been used only to assess relative similarities and differences of these cells. Here we show that principal component analysis of global gene expression profiles map cells in multidimensional transcript profile space and the positions of differentiating cells progress in a stepwise manner along trajectories starting from undifferentiated embryonic stem (ES) cells located in the apex. We present three ‘cell lineage trajectories’, which represent the differentiation of ES cells into the first three lineages in mammalian development: primitive endoderm, trophoblast and primitive ectoderm/neural ectoderm. The positions of the cells along these trajectories seem to reflect the developmental potency of cells and can be used as a scale for the potential of cells. Indeed, we show that embryonic germ cells and induced pluripotent cells are mapped near the origin of the trajectories, whereas mouse embryo fibroblast and fibroblast cell lines are mapped near the far end of the trajectories. We suggest that this method can be used as the non-operational semi-quantitative definition of cell differentiation status and developmental potency. Furthermore, the global expression profiles of cell lineages provide a framework for the future study of in vitro and in vivo cell differentiation

Design, synthesis and biological assessment of novel N-substituted 3-(phthalimidin-2-yl)-2,6-dioxopiperidines and 3-substituted 2,6-dioxopiperidines for TNF-α inhibitory activity

Eight novel 2-(2,6-dioxopiperidin-3-yl)phthalimidine EM-12 dithiocarbamates 9 and 10, N-substituted 3-(phthalimidin-2-yl)-2,6-dioxopiperidines 11-14 and 3-substituted 2,6-dioxopiperidines 16 and 18 were synthesized as tumor necrosis factor-α (TNF-α) synthesis inhibitors. Synthesis involved utilization of a novel condensation approach, a one-pot reaction involving addition, iminium rearrangement and elimination, to generate the phthalimidine ring required for the creation of compounds 9-14. Agents were, thereafter, quantitatively assessed for their ability to suppress the synthesis on TNF-α in a lipopolysaccharide (LPS)-challenged mouse macrophage-like cellular screen, utilizing cultured RAW 264.7 cells. Whereas compounds 9, 14 and 16 exhibited potent TNF-α lowering activity, reducing TNF-α by up to 48% at 30 μM, compounds 12, 17 and 18 presented moderate TNF-α inhibitory action. The TNF-α lowering properties of these analogs proved more potent than that of revlimid (3) and thalidomide (1). In particular, N-dithiophthalimidomethyl-3-(phthalimidin-2-yl)-2,6-dioxopiperidine 14 not only possessed the greatest potency of the analogs to reduce TNF-α synthesis, but achieved this with minor cellular toxicity at 30 μM. The pharmacological focus of the presented compounds is towards the development of well-tolerated agents to ameliorate the neuroinflammation, that is, commonly associated with neurodegenerative disorders, epitomized by Alzheimer's disease and Parkinson's disease