Out-of-plane orientation of luminescent excitons in atomically thin indium selenide flakes

Van der Waals materials offer a wide range of atomic layers with unique properties that can be easily combined to engineer novel electronic and photonic devices. A missing ingredient of the van der Waals platform is a two-dimensional crystal with naturally occurring out-of-plane luminescent dipole orientation. Here we measure the far-field photoluminescence intensity distribution of bulk InSe and two-dimensional InSe, WSe$_2$ and MoSe$_2$. We demonstrate, with the support of ab-initio calculations, that layered InSe flakes sustain luminescent excitons with an intrinsic out-of-plane orientation, in contrast with the in-plane orientation of dipoles we find in two-dimensional WSe$_2$ and MoSe$_2$ at room-temperature. These results, combined with the high tunability of the optical response and outstanding transport properties, position layered InSe as a promising semiconductor for novel optoelectronic devices, in particular for hybrid integrated photonic chips which exploit the out-of-plane dipole orientation.Comment: Published in Nature Communications. 12 pages, 5 figures. Link: https://www.nature.com/articles/s41467-019-11920-

Optical and electronic properties of 2H−MoS₂ under pressure : revealing the spin-polarized nature of bulk electronic bands

Monolayers of transition-metal dichalcogenide semiconductors present spin-valley locked electronic bands, a property with applications in valleytronics and spintronics that is usually believed to be absent in their centrosymmetric (as the bilayer or bulk) counterparts. Here we show that bulk 2H−MoS₂ hides a spin-polarized nature of states determining its direct band gap, with the spin sequence of valence and conduction bands expected for its single layer. This relevant finding is attained by investigating the behavior of the binding energy of A and B excitons under high pressure, by means of absorption measurements and density-functional-theory calculations. These results raise an unusual situation in which bright and dark exciton degeneracy is naturally broken in a centrosymmetric material. Additionally, the phonon-assisted scattering process of excitons has been studied by analyzing the pressure dependence of the linewidth of discrete excitons observed at the absorption coefficient edge of 2H−MoS₂. Also, the pressure dependence of the indirect optical transitions of bulk 2H−MoS2 has been analyzed by absorption measurements and density-functional-theory calculations. These results reflect a progressive closure of the indirect band gap as pressure increases, indicating that metallization of bulk MoS₂ may occur at pressures higher than 26 GPa

Revealing giant exciton fine-structure splitting in 2D perovskites using van der Waals passivation

The study of two-dimensional (2D) van der Waals materials has been an active field of research in the development of new optoelectronics and photonic applications over the last decade. Organic-inorganic layered perovskites are currently some of the most promising 2D van der Waals materials, due to their exceptional optical brightness and enhanced excitonic effects. However, low crystal quality and spectral diffusion usually broaden the exciton linewidth, obscuring the fine structure of the exciton in conventional photoluminescence experiments. Here, we propose a mechanical approach for reducing the effect of spectral diffusion by means of hBN-capping on layered perovskites with different thicknesses, revealing the exciton fine structure. We used a stochastic model to link the reduction of the spectral linewidth with the population of active charge fluctuation centres present in the organic spacer taking part in the dynamical Stark shift. Active fluctuation centres are reduced by a factor of 3.7 to 7.1 when we include hBN-capping according to our direct spectral measurements. This rate is in good agreement with the analysis of the overlap between the squared perovskite lattice and the hexagonal hBN lattice. Van der Waals forces between both lattices cause the partial clamping of the perovskite organic spacer molecules, and hence, the amplitude of the dynamical Stark shift characteristic of the spectral diffusion effect is reduced. Our work provides an easy and low-cost solution to the problem of accessing important fine-structure excitonic state information, along with an explanation of the important carrier dynamics present in the organic spacer that affect the quality of the optical emission

Formation of Si/SiO2 Luminescent Quantum Dots From Mesoporous Silicon by Sodium Tetraborate/Citric Acid Oxidation Treatment

We propose a rapid, one-pot method to generate photoluminescent (PL) mesoporous silicon nanoparticles (PSiNPs). Typically, mesoporous silicon (meso-PSi) films, obtained by electrochemical etching of monocrystalline silicon substrates, do not display strong PL because the silicon nanocrystals (nc-Si) in the skeleton are generally too large to display quantum confinement effects. Here we describe an improved approach to form photoluminescent PSiNPs from meso-PSi by partial oxidation in aqueous sodium borate (borax) solutions. The borax solution acts to simultaneously oxidize the nc-Si surface and to partially dissolve the oxide product. This results in reduction of the size of the nc-Si core into the quantum confinement regime, and formation of an insulating silicon dioxide (SiO2) shell. The shell serves to passivate the surface of the silicon nanocrystals more effectively localizing excitons and increasing PL intensity. We show that the oxidation/dissolution process can be terminated by addition of excess citric acid, which changes the pH of the solution from alkaline to acidic. The process is monitored in situ by measurement of the steady-state PL spectrum from the PSiNPs. The measured PL intensity increases by 1.5- to 2-fold upon addition of citric acid, which we attribute to passivation of non-radiative recombination centers in the oxide shell. The measured PL quantum yield of the final product is up to 20%, the PL activation procedure takes <20 min, and the resulting material remains stable in aqueous dispersion for at least 1 day. The proposed phenomenological model explaining the process takes into account both pH changes in the solution and the potential increase in solubility of silicic acid due to interaction with sodium cations

Self-assembled MgxZn1−xO quantum dots (0 ≤ x ≤ 1) on different substrates using spray pyrolysis methodology

By using the spray pyrolysis methodology in its classical configuration we have grown self-assembled MgxZn1−xO quantum dots (size [similar]4–6 nm) in the overall range of compositions 0 ≤ x ≤ 1 on c-sapphire, Si (100) and quartz substrates. Composition of the quantum dots was determined by means of transmission electron microscopy-energy dispersive X-ray analysis (TEM-EDAX) and X-ray photoelectron spectroscopy. Selected area electron diffraction reveals the growth of single phase hexagonal MgxZn1−xO quantum dots with composition 0 ≤ x ≤ 0.32 by using a nominal concentration of Mg in the range 0 to 45%. Onset of Mg concentration about 50% (nominal) forces the hexagonal lattice to undergo a phase transition from hexagonal to a cubic structure which resulted in the growth of hexagonal and cubic phases of MgxZn1−xO in the intermediate range of Mg concentrations 50 to 85% (0.39 ≤ x ≤ 0.77), whereas higher nominal concentration of Mg ≥ 90% (0.81 ≤ x ≤ 1) leads to the growth of single phase cubic MgxZn1−xO quantum dots. High resolution transmission electron microscopy and fast Fourier transform confirm the results and show clearly distinguishable hexagonal and cubic crystal structures of the respective quantum dots. A difference of 0.24 eV was detected between the core levels (Zn 2p and Mg 1s) measured in quantum dots with hexagonal and cubic structures by X-ray photoemission. The shift of these core levels can be explained in the frame of the different coordination of cations in the hexagonal and cubic configurations. Finally, the optical absorption measurements performed on single phase hexagonal MgxZn1−xO QDs exhibited a clear shift in optical energy gap on increasing the Mg concentration from 0 to 40%, which is explained as an effect of substitution of Zn2+ by Mg2+ in the ZnO lattice

¿Deben los modelos de emergencia de Lolium rigidum adaptarse en función de las condiciones climáticas?

Lolium rigidum es una problemática mala hierba a nivel mundial que en España produce importantes pérdidas de cultivo y económicas. El grupo de Biología y Agroecología de Malas hierbas (BAMh) de la SEMh ha estudiado la emergencia de esta especie durante dos campañas, 2016-17 y 2017-18. Para ello, se estableció un experimento en 10 localidades con una población de L. rigidum recolectada en Cataluña y se realizó el seguimiento de su emergencia cada 2-7 días. La emergencia se parametrizó en función de registros de temperatura y humedad procedentes de un datalogger enterrado a 2 cm. Los resultados muestran que el uso de los grados térmicos horarios es suficiente para una correcta descripción de la emergencia, desechando la opción de aplicar los grados hidrotérmicos, más comunes en los modelos de malas hierbas de invierno. Sin embargo, la emergencia de esta población de L. rigidum fue diferente en el centro y noreste de España respecto al sur, sugiriendo un efecto ambiental debido a su adaptación climática. Por ello, se plantea la necesidad de incluir poblaciones locales con el fin de adaptar el modelo desarrollado en el presente trabajo para los biotipos climáticos existentesPostprint (published version

Riesgo quirúrgico tras resección pulmonar anatómica en cirugía torácica. Modelo predictivo a partir de una base de datos nacional multicéntrica

Introduction: the aim of this study was to develop a surgical risk prediction model in patients undergoing anatomic lung resections from the registry of the Spanish Video-Assisted Thoracic Surgery Group (GEVATS). Methods: data were collected from 3,533 patients undergoing anatomic lung resection for any diagnosis between December 20, 2016 and March 20, 2018. We defined a combined outcome variable: death or Clavien Dindo grade IV complication at 90 days after surgery. Univariate and multivariate analyses were performed by logistic regression. Internal validation of the model was performed using resampling techniques. Results: the incidence of the outcome variable was 4.29% (95% CI 3.6-4.9). The variables remaining in the final logistic model were: age, sex, previous lung cancer resection, dyspnea (mMRC), right pneumonectomy, and ppo DLCO. The performance parameters of the model adjusted by resampling were: C-statistic 0.712 (95% CI 0.648-0.750), Brier score 0.042 and bootstrap shrinkage 0.854. Conclusions: the risk prediction model obtained from the GEVATS database is a simple, valid, and reliable model that is a useful tool for establishing the risk of a patient undergoing anatomic lung resection