256 research outputs found
Hanford Low-activity Waste Glass Composition-temperature-melt Viscosity Relationships
This study developed a model for predicting viscosity of alkali-alumino-borosilicate glass melts as functions of composition and temperature. The model is based on a total of 3935 viscosity-temperature data from 574 glasses with viscosity values ranging from 2.53 to 7260 Poise (P) in the temperature range of 900â1260°C. Several different model forms were surveyed, including those based on Arrhenius, Vogel-Fulcher-Tammann, Avramov-Milchev, and Mauro-Yue-Ellison-Gupta-Allen. For each of these models, combinations of the temperature-independent parameters were fitted to composition. It was found that generally fitting more than one temperature-independent parameter as functions of composition resulted in overfitting. The Avramov-Milchev-based model was found to best represent the Hanford low-activity waste glass melt viscosity data based on model fit and validation statistics. A 21-term partial quadratic mixture model was recommended for use. This model predicts melt viscosity with a root-mean square error of.1736 ln(P), which is similar to the error in viscosity measurements from replicate glass analyses of.1383 ln(P). Viscosity was found to be most increased by SiO2 \u3e Al2O3 \u3e ZrO2 \u3e SnO2 and most decreased by Li2O \u3e Na2O \u3e B2O3 \u3e CaO \u3e K2O \u3e MgO, at temperatures from 900 to 1260°C
Recommended from our members
Database and Interim Glass Property Models for Hanford HLW Glasses
The purpose of this report is to provide a methodology for an increase in the efficiency and a decrease in the cost of vitrifying high-level waste (HLW) by optimizing HLW glass formulation. This methodology consists in collecting and generating a database of glass properties that determine HLW glass processability and acceptability and relating these properties to glass composition. The report explains how the property-composition models are developed, fitted to data, used for glass formulation optimization, and continuously updated in response to changes in HLW composition estimates and changes in glass processing technology. Further, the report reviews the glass property-composition literature data and presents their preliminary critical evaluation and screening. Finally the report provides interim property-composition models for melt viscosity, for liquidus temperature (with spinel and zircon primary crystalline phases), and for the product consistency test normalized releases of B, Na, and Li. Models were fitted to a subset of the screened database deemed most relevant for the current HLW composition region
Life Cycle Replacement by Gene Introduction under an Allee Effect in Periodical Cicadas
Periodical cicadas (Magicicada spp.) in the USA are divided into three species groups (-decim, -cassini, -decula) of similar but distinct morphology and behavior. Each group contains at least one species with a 17-year life cycle and one with a 13-year cycle; each species is most closely related to one with the other cycle. One explanation for the apparent polyphyly of 13- and 17-year life cycles is that populations switch between the two cycles. Using a numerical model, we test the general feasibility of life cycle switching by the introduction of alleles for one cycle into populations of the other cycle. Our results suggest that fitness reductions at low population densities of mating individuals (the Allee effect) could play a role in life cycle switching. In our model, if the 13-year cycle is genetically dominant, a 17-year cycle population will switch to a 13-year cycle given the introduction of a few 13-year cycle alleles under a moderate Allee effect. We also show that under a weak Allee effect, different year-classes (âbroodsâ) with 17-year life cycles can be generated. Remarkably, the outcomes of our models depend only on the dominance relationships of the cycle alleles, irrespective of any fitness advantages
57Co Production using RbCl/RbCl/58Ni Target Stacks at the Los Alamos Isotope Production Facility: LA-UR-14-22122
Introduction
The Los Alamos Isotope Production Program commonly irradiates target stacks consisting of high, medium and low-energy targets in the
âA-â, âB-â, and âC-slotsâ, respectively, with a 100MeV proton beam. The Program has recently considered the production of 57Co (t1/2 = 271.74 d, 100% EC) from 58Ni using the low-energy posi-tion of the Isotope Production Facility, down-stream of two RbCl salt targets. Initial MCNPX/ CINDERâ90 studies predicted 57Co radioisotopic purities >90% depending on time allotted for decay. But these studies do not account for broadening of the proton beamâs energy distribution caused by density changes in molten, potentially boiling RbCl targets upstream of the 58Ni (see e.g., [1]). During a typical production with 230 ”A average proton intensity, the RbCl targetsâ temperature is expected to produce beam energy changes of several MeV and commensurate effects on the yield and purity of any radioisotope irradiated in the low-energy posi-tion of the target stack. An experiment was designed to investigate both the potential for 57Coâs large-scale production and the 2-dimensional proton beam energy distribution.
Material and Methods
Two aluminum targets holders were fabricated to each contain 31 58Ni discs (99.48%, Isoflex, CA), 4.76 mm (Ί) x 0.127 mm (thickness). Each foil was indexed with a unique cut pattern by EDM with a 0.254 mm brass wire to allow their position in the target to be tracked through hot cell disassembly and assay (see FIG. 1). Brass residue from EDM was removed with HNO3/HCl solution. The holdersâ front windows were 2.87 and 1.37 mm thick, corresponding to predicted average incident energies of 17.9 and 24.8 MeV on the Ni [2].
Each target was irradiated with protons for 1 h with an average beam current of 218 ± 3 ”A to ensure an upstream RbCl target temperature and density that would mimic routine production. Following irradiation, targets were disassembled and each disc was assayed by HPGe γ-spectroscopy. Residuals 56Co (t1/2 = 77.2 d, 100% EC) and 57Co have inversely varying measured nuclear formation cross sections between approximately 15 and 40 MeV.
Results and Conclusion
Distributions of 56,57,58,60Co were tracked as described in both irradiated targets.
The distribution of activities matched expectations, with radioisotopes produced by proton interactions with the 58Ni target (56Co and 57Co) concentrated in the area struck by IPFâs rastered, annulus-shaped proton beam, and the distribution of radioisotopes produced by neutron-induced reactions (58Co and 60Co) relatively uniform across all irradiated foils. The potential range of such temperature variations predicted by thermal modeling (approx. ± 200 °C) corre-sponds to a density variation of nearly 0.2 g.cmâ3, and a change in the average energy of protons incident on the low-energy âC-slotâ of approximately 5 MeV, well-matched to the indi-rectly measured energy variation plotted in FIG. 3. No energy distribution in the plane per-pendicular to the beam axis has previously been assumed in the design of IPF targets.
The effective incident energy measured by yields of 57Co and 56Co is, however, almost 5 MeV higher than those predicted using Anderson and Zieglerâs well-known formalism [2]. This discrepancy is supported by previous reports [3] and likely exacerbated compared to these reports by the large magnitude of energy degradation (from 100 MeV down to 30 MeV) in the IPF target stack. For more detailed discussion, refer to Marus et al.âs abstract, also reported at this meeting. While the experiments reported do confirm the potential for many Ci-scale yields of 57Co from months-long irradiations at the IPF, the level radioisotopic impurities 56Co and 58Co are concerning. Commercial radioisotope producers using U-150 (23 MeV) and RIC-14 (14 MeV) cyclotrons in Obninsk, Russia specify 56/58Co activities at levels <0.2% of available 57C
Tissue tropisms opt for transmissible reassortants during avian and swine influenza A virus co-infection in swine
Genetic reassortment between influenza A viruses (IAVs) facilitate emergence of pandemic strains, and swine are proposed as a âmixing vesselâ for generating reassortants of avian and mammalian IAVs that could be of risk to mammals, including humans. However, how a transmissible reassortant emerges in swine are not well understood. Genomic analyses of 571 isolates recovered from nasal wash samples and respiratory tract tissues of a group of co-housed pigs (influenza-seronegative, avian H1N1 IAVâinfected, and swine H3N2 IAVâ infected pigs) identified 30 distinct genotypes of reassortants. Viruses recovered from lower respiratory tract tissues had the largest genomic diversity, and those recovered from turbinates and nasal wash fluids had the least. Reassortants from lower respiratory tracts had the largest variations in growth kinetics in respiratory tract epithelial cells, and the cold temperature in swine nasal cells seemed to select the type of reassortant viruses shed by the pigs. One reassortant in nasal wash samples was consistently identified in upper, middle, and lower respiratory tract tissues, and it was confirmed to be transmitted efficiently between pigs. Study findings suggest that, during mixed infections of avian and swine IAVs, genetic reassortments are likely to occur in the lower respiratory track, and tissue tropism is an important factor selecting for a transmissible reassortant
Reducing Implicit Racial Preferences: II Intervention Effectiveness Across Time
Implicit preferences are malleable, but does that change last? We tested 9 interventions (8 real and 1 sham) to reduce implicit racial preferences over time. In 2 studies with a total of 6,321 participants, all 9 interventions immediately reduced implicit preferences. However, none were effective after a delay of several hours to several days. We also found that these interventions did not change explicit racial preferences and were not reliably moderated by motivations to respond without prejudice. Short-term malleability in implicit preferences does not necessarily lead to long-term change, raising new questions about the flexibility and stability of implicit preferences. (PsycINFO Database Recor
Intelligent Front-End Sample Preparation Tool Using Acoustic Streaming
We have successfully developed a nucleic acid extraction system based on a microacoustic lysis array coupled to an integrated nucleic acid extraction system all on a single cartridge. The microacoustic lysing array is based on 36{sup o} Y cut lithium niobate, which couples bulk acoustic waves (BAW) into the microchannels. The microchannels were fabricated using Mylar laminates and fused silica to form acoustic-fluidic interface cartridges. The transducer array consists of four active elements directed for cell lysis and one optional BAW element for mixing on the cartridge. The lysis system was modeled using one dimensional (1D) transmission line and two dimensional (2D) FEM models. For input powers required to lyse cells, the flow rate dictated the temperature change across the lysing region. From the computational models, a flow rate of 10 {micro}L/min produced a temperature rise of 23.2 C and only 6.7 C when flowing at 60 {micro}L/min. The measured temperature changes were 5 C less than the model. The computational models also permitted optimization of the acoustic coupling to the microchannel region and revealed the potential impact of thermal effects if not controlled. Using E. coli, we achieved a lysing efficacy of 49.9 {+-} 29.92 % based on a cell viability assay with a 757.2 % increase in ATP release within 20 seconds of acoustic exposure. A bench-top lysing system required 15-20 minutes operating up to 58 Watts to achieve the same level of cell lysis. We demonstrate that active mixing on the cartridge was critical to maximize binding and release of nucleic acid to the magnetic beads. Using a sol-gel silica bead matrix filled microchannel the extraction efficacy was 40%. The cartridge based magnetic bead system had an extraction efficiency of 19.2%. For an electric field based method that used Nafion films, a nucleic acid extraction efficiency of 66.3 % was achieved at 6 volts DC. For the flow rates we tested (10-50 {micro}L/min), the nucleic acid extraction time was 5-10 minutes for a volume of 50 {micro}L. Moreover, a unique feature of this technology is the ability to replace the cartridges for subsequent nucleic acid extractions
Overweight, physical activity, tobacco and alcohol consumption in a cross-sectional random sample of German adults
BACKGROUND: There is a current paucity of data on the health behaviour of non-selected populations in Central Europe. Data on health behaviour were collected as part of the EMIL study which investigated the prevalence of infection with Echinococcus multilocularis and other medical conditions in an urban German population. METHODS: Participating in the present study were 2,187 adults (1,138 females [52.0%]; 1,049 males [48.0%], age: 18â65 years) taken from a sample of 4,000 persons randomly chosen from an urban population. Data on health behaviour like physical activity, tobacco and alcohol consumption were obtained by means of a questionnaire, documentation of anthropometric data, abdominal ultrasound and blood specimens for assessment of chemical parameters. RESULTS: The overall rate of participation was 62.8%. Of these, 50.3% of the adults were overweight or obese. The proportion of active tobacco smokers stood at 30.1%. Of those surveyed 38.9% did not participate in any physical activity. Less than 2 hours of leisure time physical activity per week was associated with female sex, higher BMI (Body Mass Index), smoking and no alcohol consumption. Participants consumed on average 12 grams of alcohol per day. Total cholesterol was in 62.0% (>5.2 mmol/l) and triglycerides were elevated in 20.5% (â„ 2.3 mmol/l) of subjects studied. Hepatic steatosis was identified in 27.4% of subjects and showed an association with male sex, higher BMI, higher age, higher total blood cholesterol, lower HDL, higher triglycerides and higher ALT. CONCLUSION: This random sample of German urban adults was characterised by a high prevalence of overweight and obesity. This and the pattern of alcohol consumption, smoking and physical activity can be considered to put this group at high risk for associated morbidity and underscore the urgent need for preventive measures aimed at reducing the significantly increased health risk
A new specimen of the ornithischian dinosaur Hesperosaurus mjosi from the Upper Jurassic Morrison Formation of Montana, U.S.A., and implications for growth and size in Morrison stegosaurs
Stegosauria is a clade of ornithischian dinosaurs characterized by a bizarre array of dermal armor that extends from the neck to the end of the tail. Two genera of stegosaur are currently recognised from North America: the well-known Stegosaurus stenops and the much rarer Hesperosaurus mjosi. A new specimen of Hesperosaurus mjosi was discovered in some of the most northerly outcrops of the Upper Jurassic Morrison Formation near Livingston, Montana. The new specimen includes cranial, vertebral, and appendicular material as well as a dermal plate, and the excellent state of preservation of the palate reveals new anatomical information about this region in stegosaurs. Histological examination of the tibia indicates that the individual was not skeletally mature at time of death. Comparison with previously studied Stegosaurus and Hesperosaurus individuals indicates that Hesperosaurus mjosi may have been a smaller species than Stegosaurus stenops. Physiological processes scale with body mass, M, according to the relationship M0.75 in extant megaherbivores; thus, larger animals are better able to cope with more arid environments where forage is less abundant. Under this scenario, it is possible that Stegosaurus stenops and Hesperosaurus mjosi were environmentally partitioned, with the larger S. stenops occupying more arid environments. Analyses of the temporal overlap and latitudinal range of Morrison stegosaurs would allow this hypothesis to be investigated.The attached document is the authorsâ final accepted version of the journal article. You are advised to consult the publisherâs version if you wish to cite from it
- âŠ