8 research outputs found
Metal artifacts from titanium and steel screws in CT, 1.5T and 3T MR images of the tibial Pilon: a quantitative assessment in 3D
Free to read Radiographs are commonly used to assess articular reduction of the distal tibia (pilon) fractures postoperatively, but may reveal malreductions inaccurately. While Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) are potential 3D alternatives they generate metal-related artifacts. This study aims to quantify the artifact size from orthopaedic screws using CT, 1.5T and 3T MRI data. Three screws were inserted into one intact human cadaver ankle specimen proximal to and along the distal articular surface, then CT, 1.5T and 3T MRI scanned. Four types of screws were investigated: titanium alloy (TA), stainless steel (SS) (Ø = 3.5 mm), cannulated TA (CTA) and cannulated SS (CSS)(Ø = 4.0 mm, Ø empty core = 2.6 mm). 3D artifact models were reconstructed using adaptive thresholding. The artifact size was measured by calculating the perpendicular distance from the central screw axis to the boundary of the artifact in four anatomical directions with respect to the distal tibia. The artifact sizes (in the order of TA, SS, CTA and CSS) from CT were 2.0 mm, 2.6 mm, 1.6 mm and 2.0 mm; from 1.5T MRI they were 3.7 mm, 10.9 mm, 2.9 mm, and 9 mm; and 3T MRI they were 4.4 mm, 15.3 mm, 3.8 mm, and 11.6 mm respectively. Therefore, CT can be used as long as the screws are at a safe distance of about 2 mm from the articular surface. MRI can be used if the screws are at least 3 mm away from the articular surface except SS and CSS. Artifacts from steel screws were too large thus obstructed the pilon from being visualised in MRI. Significant differences (P < 0.05) were found in the size of artifacts between all imaging modalities, screw types and material types, except 1.5T versus 3T MRI for the SS screws (P = 0.063). CTA screws near the joint surface can improve postoperative assessment in CT and MRI. MRI presents a favourable non-ionising alternative when using titanium hardware. Since these factors may influence the quality of postoperative assessment, potential improvements in operative techniques should be considered
Gastrografin can be detected in ex vivo biological specimens by dual‐energy CT scanning
Background: Dual‐energy CT is able to distinguish between materials based on differences in X‐ray absorption at different X‐ray beam energies. The strong k‐edge photoelectric effect of materials with a high atomic number makes this modality ideal for identifying iodine‐containing compounds. We aim to evaluate dual‐energy CT for the detection of Gastrografin (GG) (diatrizoate, Bayer PLC, Reading, UK) enteric contrast medium and validate the conditions for the measurement in ex vivo samples. Methods: Dual‐energy CT acquisitions were performed to detect Gastrografin in serial dilutions of water, saline and body fluids. We also evaluated the stability of Gastrografin solutions over time at room temperature. Stool specimens were examined to validate the proposed study protocol for clinical applications. Results: Concentrations as low as 0.2% of Gastrografin were reproducibly detected in vitro and ex vivo samples by DECT, with linear readings ranging from 0.2% to 25% Gastrografin. Gastrografin was shown to be stable in ex vivo biological samples, and there was no difference in detection over time. Gastrografin was detected in stool specimens when administered orally. The detection curves followed the expected saturation effect at high concentrations of iodine. Conclusions: Dual‐energy CT offers a convenient, quick, reliable and reproducible method for detecting and quantifying the presence of Gastrografin in ex vivo clinical specimens. Biological solutions containing Gastrografin are stable over time. A minimum dilution level of 25% is suggested to avoid beam saturation and inaccurate results
Imaging and right ventricular pacing lead position: a comparison of CT, MRI, and echocardiography
BackgroundRight ventricular nonapical (RVNA) pacing may reduce the risk of heart failure. Fluoroscopy is the standard approach to determine lead tip position, but is inaccurate. We compared cardiac computed tomography (CT), magnetic resonance imaging (MRI), two-dimensional and three-dimensional transthoracic echocardiography (TTE), and chest x-ray (CXR) to assess which provides the optimal assessment of right ventricular (RV) lead tip position
Can MRI accurately detect pilon articular malreduction? A quantitative comparison between CT and 3T MRI bone models
Background: Pilon fracture reduction is a challenging surgery. Radiographs are commonly used to assess the quality of reduction, but are limited in revealing the remaining bone incongruities. The study aimed to develop a method in quantifying articular malreductions using 3D computed tomography (CT) and magnetic resonance imaging (MRI) models