HVOF-Deposited WCCoCr as Replacement for Hard Cr in Landing Gear Actuators

WCCoCr coatings deposited by HVOF can replace hard Cr on landing gear components. Powders with two different WC particle sizes (micro and nano-) and geometries have been employed to study the effects on the coating’s properties. Moreover, coatings produced employing two sets of parameters resulting in high and low flame temperatures have been evaluated. Minor differences in microstructure and morphology were observed for the two powders employing the same spraying parameters, but the nano-sized powder exhibited a higher spraying efficiency. However, more significant microstructural changes result when the low- and high-energy spray parameters are used. Moreover, results of various tests which include adhesion, wear, salt fog corrosion resistance, liquid immersion, and axial fatigue strength, indicate that the coatings produced with high-energy flame are similar in behavior. On the other hand, the nanostructured low-energy flame coating exhibited a significantly lower salt fog corrosion resistanc

Long-term symptoms in dizzy patients examined in a university clinic

Background: The long-term course of dizziness was investigated combining medical chart and survey data. The survey was undertaken median (interquartile range (IQR)) 4.6 (4.3) years after the initial medical examination. Methods: Chart data comprised sex, age, diagnosis, symptom duration, postural sway and neck pain. Survey data comprised symptom severity assessed by the Vertigo Symptom Scale – Short Form (VSS-SF), and data regarding current state of dizziness, medication, neck pain and other chronic conditions. Results: The sample consisted of 503 patients, the mean (standard deviation (SD)) age was 50.0 (11.6) years, women being slightly overrepresented (60%). Severe problems with dizziness (VSS-SF mean (SD) 13.9, (10.8)) were indicated in the total group and in 5 of 6 diagnostic sub-groups. Vertigo/balance- and autonomic/anxiety-related symptoms were present in all groups. Current dizziness was confirmed by 73% who had significantly more severe problems than the non-dizzy (VSS-SF mean (SD): 17.2 (10.1) versus 5.0 (7.3)). Symptoms were related to vertigo/balance more than to autonomic/anxiety (test of interaction p < 0.001). Based on simple logistic regression analysis, sex, symptom duration, neck pain, sway and diagnoses predicted dizziness. Symptom duration and neck pain remained predictors in the adjusted analysis. Age, symptom duration, neck pain, sway and diagnoses predicted vertigo/balance-related dizziness in both regression analyses. Sex, neck pain and sway predicted development of autonomic/anxiety-related dizziness according to simple regression analysis, while only neck pain remained a significant predictor in the adjusted analysis. With respect to diagnosis, simple regression analysis showed significant reduced likelihood for development of dizziness in all vestibular sub-groups when compared to the non-otogenic dizziness group. With respect to vertigo/balance- and autonomic/anxiety-related symptoms, the implication of diagnostic belonging varied. No effect of diagnoses was seen in adjusted analyses. Conclusion: The majority of patients had persistent and severe problems with dizziness. The wait-and-see attitude before referral to specialist institutions may be questioned. Early, active movements seem necessary, and attention should be paid to the presence of neck pain. Diagnoses had limited prognostic value. Questionnaire-based evaluations could assist in classification and identification of type of dizziness and thereby provide a better basis for specific rehabilitation

The economic burden of bronchiectasis - known and unknown:a systematic review

Abstract Background The increasing prevalence and recognition of bronchiectasis in clinical practice necessitates a better understanding of the economic disease burden to improve the management and achieve better clinical and economic outcomes. This study aimed to assess the economic burden of bronchiectasis based on a review of published literature. Methods A systematic literature review was conducted using MEDLINE, Embase, EconLit and Cochrane databases to identify publications (1 January 2001 to 31 December 2016) on the economic burden of bronchiectasis in adults. Results A total of 26 publications were identified that reported resource use and costs associated with management of bronchiectasis. Two US studies reported annual incremental costs of bronchiectasis versus matched controls of US$5681 and US$2319 per patient. Twenty-four studies reported on hospitalization rates or duration of hospitalization for patients with bronchiectasis. Mean annual hospitalization rates per patient, reported in six studies, ranged from 0.3–1.3, while mean annual age-adjusted hospitalization rates, reported in four studies, ranged from 1.8–25.7 per 100,000 population. The average duration of hospitalization, reported in 12 studies, ranged from 2 to 17 days. Eight publications reported management costs of bronchiectasis. Total annual management costs of €3515 and €4672 per patient were reported in two Spanish studies. Two US studies reported total costs of approximately US$26,000 in patients without exacerbations, increasing to US$36,00–37,000 in patients with exacerbations. Similarly, a Spanish study reported higher total annual costs for patients with > 2 exacerbations per year (€7520) compared with those without exacerbations (€3892). P. aeruginosa infection increased management costs by US$31,551 to US$56,499, as reported in two US studies, with hospitalization being the main cost driver. Conclusions The current literature suggests that the economic burden of bronchiectasis in society is significant. Hospitalization costs are the major driver behind these costs, especially in patients with frequent exacerbations. However, the true economic burden of bronchiectasis is likely to be underestimated because most studies were retrospective, used ICD-9-CM coding to identify patients, and often ignored outpatient burden and cost. We present a conceptual framework to facilitate a more comprehensive assessment of the true burden of bronchiectasis for individuals, healthcare systems and society

Niobium and niobium-iron coatings on API 5LX 70 steel applied with HVOF

The present study aimed to create and characterize niobium and niobium-iron60% coatings applied to steel API 5L X70 using the hypersonic thermal spray process (HVOF). The morphologies of the coatings were analyzed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and profilometry, while the coatings’ hardnesses was evaluated using the Vickers hardness test. The coatings’ corrosion resistance was evaluated by monitoring their open circuit potential and potentiodynamic polarization and performing electrochemical impedance spectroscopy in a 0.05 M NaCl solution. The results showed that the niobium-iron coating contained minor porosity regions, while such defects occurred over large regions of the niobium coating. In terms of corrosion resistance, the coatings obtained in this work promoted a reduction in the substrate’s corrosion rate, but the presence of discontinuities such as porosity compromised the barrier effects of these coatings

Diagnostic tools in Rhinology EAACI position paper

This EAACI Task Force document aims at providing the readers with a comprehensive and complete overview of the currently available tools for diagnosis of nasal and sino-nasal disease. We have tried to logically order the different important issues related to history taking, clinical examination and additional investigative tools for evaluation of the severity of sinonasal disease into a consensus document. A panel of European experts in the field of Rhinology has contributed to this consensus document on Diagnostic Tools in Rhinology

Structure property relationship of suspension thermally sprayed WC-Co nanocomposite coatings.

Tribomechanical properties of nanostructured coatings deposited by suspension high velocity oxy-fuel (S-HVOF) and conventional HVOF (Jet Kote) spraying were evaluated. Nanostructured S-HVOF coatings were obtained via ball milling of the agglomerated and sintered WC-12Co feedstock powder, which were deposited via an aqueous-based suspension using modified HVOF (TopGun) process. Microstructural evaluations of these hardmetal coatings included transmission electron microscopy, x-ray diffraction, and scanning electron microscopy equipped with energy dispersive x-ray spectroscopy. The nanohardness and modulus of the coated specimens were investigated using a diamond Berkovich nanoindenter. Sliding wear tests were conducted using a ball-on-flat test rig. Results indicated that low porosity coatings with nanostructured features were obtained. High carbon loss was observed, but coatings showed a high hardness up to 1000 HV2.9N. S-HVOF coatings also showed improved sliding wear and friction behavior, which were attributed to nanosized particles reducing ball wear in three-body abrasion and support of metal matrix due to uniform distribution of nanoparticles in the coating microstructure