UV Plasmonic Metamaterial from Vertical Non-Conventional Nanoantennas

Boston, Massachusetts, November 29-December 4, 2015Metallic nanoantennas have been used as nanophotonic detectors of infrared and visible radiation [1] [2]. The extension of these elements to the ultraviolet (UV) range has not been satisfactory due to the poor optical absorption showed by metals at these frequencies. The low values of electrical conductivity of metals at UV frequencies compromise the generation of currents along the resonant geometries. In change, several non-conventional materials show a larger value of electrical conductivity, increasing notably the absorption of nanoantennas in the UV [3]. This electrical conductivity increment is more noticeable in liquid semimetals as Bismuth or Gallium. Another way to improve optical absorption of these resonant elements is to arrange them with a high spatial density of semimetal nanoantennas. In this contribution we evaluate numerically, using multiphysics simulation, the light to heat conversion performance of a vertical nanoantenna arrangement embedded in a dielectric matrix. The so-obtained UV metamaterial enabling strong electromagnetic plasmonic absorption and heating effects. The use of nanoantennas allows a polarization and frequency selectivity that can be adequate to generate ultraviolet sensors. These selectivities are strongly related with the shape of the resonant elements. Furthermore, since the vertical antennas are embedded within a robust dielectric matrix, this arrangement allows to change from solid to liquid phase maintaining the nanoantenna geometry. This is possible for materials as Bismuth or Gallium which show a lower melting temperature than dielectric substrates [4]. This phase transition makes the metamaterial active upon control of temperature. [1] L. Novotny and N. van Hulst, ¿Antennas for light,¿ Nat. Photon. 5 (2), 83-90, (2011). [2] A. Cuadrado, E. Briones, F.J. González, J. Alda, ¿Polarimetric Pixel using Seebeck Nanoantenna¿. Opt Exp, 22, No 11, 13835-13845, (2014). [3] J.Toudert, R.Serna, and M. Jiménez de Castro, ¿Exploring the optical potencial of nano-Bismuth: Tunable surface Plasmon resonances in the near Ultraviolet-to-Near Infrared range¿, J. Phys. Chem. C, 116 (38), pp 20530-20539, (2012). [4] M. Jiménez de Castro, F. Cabello, J. Toudert, R. Serna and E.Haro-Poniatowski, ¿Potential of bismuth nanoparticles embedded in a glass matrix for spectral-selective thermo-optical devices¿ Appl. Phys. Lett. 105, 113102 (2014).Peer Reviewe

Self-organization and optical response of silver nanoparticles dispersed in a dielectric matrix

Abstract. Double ion-beam sputtering has been used to fabricate nanocermet multilayers consisting of silver nanoparticles sandwiched between Si 3 N 4 dielectric layers. The organization of the nanoparticles has been studied in detail by quantitative analysis of transmission electronic microscopy and atomic force microscopy images. Our results show that the nanoparticles deposited on a plane surface present an isotropic macroscopic in-plane organization while their vertical arrangement displays a topology-induced self-organization. The use of faceted alumina substrates with periodic hill-and-valley structures results in the formation of linear chains of silver particles along the valleys. In that case, transmission optical measurements reveal in-plane anisotropy

Fresnel polarisation of infra-red radiation by elemental bismuth

We revisit the classical problem of electromagnetic wave refraction from a lossless dielectric to a lossy conductor, where both media are considered to be non-magnetic, linear, isotropic and homogeneous. We derive the Fresnel coefficients of the system and the Poynting vectors at the interface, in order to compute the reflectance and transmittance of the system. We use a particular parametrisation of the referred Fresnel coefficients so as to make a connection with the ones obtained for refraction by an interface between two lossless media. This analysis allows the discussion of an actual application, namely the Fresnel polarisation of infra-red radiation by elemental bismuth, based on the concept of pseudo Brewster’s angle.We acknowledge helpful discussions with M. Vasilevskiy, P. Alpuim, J. Caridad and B. Figueiredo. The authors thank the European Structural and Investment Funds in the FEDER component, through the Operational Programme for Competitiveness and Internationalization (COMPETE 2020) [under the Project GNESIS -Graphenest's New Engineered System and its Implementation Solutions; Funding Reference: POCI-01-0247-FEDER-033566], European Regional Development Fund. This work was also supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019

The impact of the urban canyon geometry in the nocturnal heat island intensity: analysis by a simplified model adapted to a GIS

A geometria urbana é um dos fatores de maior influência na intensidade da ilha de calor urbana. Seu estudo requer a caracterização de cânions urbanos, geralmente medidos pela relação entre a altura dos edifícios e a largura da rua (H/W), conceito aplicado no modelo numérico de Oke em 1981. O objetivo deste artigo é verificar o impacto da geometria do cânion urbano na intensidade de ilhas de calor noturna. Para isso, foram realizados levantamento de dados climáticos e de geometria urbana em duas cidades brasileiras. Os valores de intensidade de ilha de calor foram confrontados com os simulados pelo modelo original de Oke (1981), o qual foi calibrado e adaptado à plataforma SIG, de forma a possibilitar a incorporação de outro parâmetro de geometria, além da relação H/W: o comprimento de rugosidade. Esse processo gerou uma nova ferramenta de cálculo, que é denominda THIS (Tool for Heat Island Simulation). Aplicou-se o novo modelo para simular alguns cenários urbanos hipotéticos, que representam vários tipos de cânions urbanos. Os resultados demonstraram que cânions urbanos de maior rugosidade amenizam as intensidades de ilha de calor noturna em relação a um cânion de mesmo valor de relação H/W e menor rugosidade.Urban geometry is one of the main factors influencing the development of urban heat islands. The study of urban geometry requires a characterization of urban canyons, which can be usually measured by the H/W ratio (a relationship between the height and the width of a street), a concept applied in a numerical model by Oke in 1981. The aim of this paper is to verify the impact of the canyon geometry on the intensity of the nocturnal urban heat islands. For this purpose, measurements of climate data and urban geometry were conducted in two Brazilian cities. The values of heat island intensity were cross-examined to those generated with the application of the original Oke's model. Therefore, this latter was calibrated and adapted to run in a GIS platform, allowing the incorporation of a geometric parameter other than the H/W ratio - the roughness length. Then, this process produced a new calculation tool, which is called THIS (Tool for Heat Island Simulation). The new model was applied to simulate some hypothetical urban scenarios representing several urban canyons types. The results showed that the urban canyons with the largest roughness reduce the nocturnal heat island intensities in relation to an urban canyon of the same H/W value, but presenting lower roughness rates instead.Fundação de Amparo à Pesquisa do Estado de São Paulo (Fapesp)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (Capes)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Building Conventional Metasurfaces with Unconventional Interband Plasmonics: A Versatile Route for Sustainable Structural Color Generation Based on Bismuth

This is the final version. Available on open access from Wiley via the DOI in this recordData Availability Statement: The data that support the findings of this study are available in the supplementary material of this article.Plasmonic metasurfaces for structural color generation are typically built using the archetypal noble metals, gold, and silver. These possess plasmonic properties in the visible spectrum due to their inherent high free carrier densities. However, they are much more expensive compared to many other metals and exhibit several nanofabrication issues such as bad surface adhesion or thermally activated inter-diffusion. In this work, it is shown that interband plasmonic materials –whose optical properties are driven by interband transitions instead of free carriers— are appealing candidates for the fabrication of sustainable and cost-efficient metasurfaces for structural coloring. By using bismuth, an environment-friendly interband plasmonic material cheaper than gold and silver, nanodisks gap-plasmon metasurfaces and planar Fabry-Perot cavities are modeled and fabricated, which both successfully enable pure colors that can be robustly tailored upon suitable design. By direct experimental comparison between both types of design in terms of color efficiency, fabrication complexity, and angular robustness; how bismuth-based gap surface plasmon metasurfaces can be excellent candidates for color microprinting is shown, whereas nanolayered Bi Fabry-Pérot cavities are ideal for macroscopic color coatings due to their ease of fabrication and implementation.European CommissionAgencia Estatal de InvestigaciónMinisterio de Ciencia e Innovació

urban sustainable development in the mediterranean area the case of sestri ponente genoa

In November 2014 a green facade was built in the Sestri Ponente district in Genoa, Italy, on an office building owned by the Istituto Nazionale di Previdenza Sociale (National Institute of Social Insurance). This area, which is characterized by a relatively high population density, faces important environmental issues related to, for example, air pollution, stormwater management, and the urban heat island effect. The Department of Sciences for Architecture at the University of Genoa (Italy) is conducting monitoring activity to evaluate the effectiveness of the green facade with regard to summer cooling, winter heating – in collaboration with Research on the Energy System – air quality improvement, and economic and environmental sustainability. Starting from this first pilot project a question arises: what would be the effect of vegetation at the district scale? This article discusses the potentialities for urban sustainable development of the integration of green infrastructure. Simulations carried out with ENVI-Met software demonstrate the potentialities of different amounts of vegetation for urban heat island mitigation. In addition, the possible stormwater runoff reduction was calculated. Such calculations are based on urban design projects developed for the area to evaluate the possible improvement to environmental quality owing to the integration of green infrastructure

Influence of ground surface characteristics on the mean radiant temperature in urban areas

The effect of variations in land cover on mean radiant surface temperature (Tmrt) is explored through a simple scheme developed within the radiation model SOLWEIG. Outgoing longwave radiation is parameterised using surface temperature observations on a grass and an asphalt surface, whereas outgoing shortwave radiation is modelled through variations in albedo for the different surfaces. The influence of surface materials on Tmrt is small compared to the effects of shadowing. Nevertheless, altering ground surface materials could contribute to a reduction on Tmrt to reduce the radiant load during heat-wave episodes in locations where shadowing is not an option. Evaluation of the new scheme suggests that despite its simplicity it can simulate the outgoing fluxes well, especially during sunny conditions. However, it underestimates at night and in shadowed locations. One grass surface used to develop the parameterisation, with very different characteristics compared to an evaluation grass site, caused Tmrt to be underestimated. The implications of using high resolution (e.g. 15 minutes) temporal forcing data under partly cloudy conditions are demonstrated even for fairly proximal sites

Thin films composed of Ag nanoclusters dispersed in TiO2: Influence of composition and thermal annealing on the microstructure and physical responses

Noble metal powders containing gold and silver have been used for many centuries, providing different colours in the windows of the medieval cathedrals and in ancient Roman glasses. Nowadays, the interest in nanocomposite materials containing noble nanoparticles embedded in dielectric matrices is related with their potential use for a wide range of advanced technological applications. They have been proposed for environmental and biological sensing, tailoring colour of functional coatings, or for surface enhanced Raman spectroscopy. Most of these applications rely on the so-called localised surface plasmon resonance absorption, which is governed by the type of the noble metal nanoparticles, their distribution, size and shape and as well as of the dielectric characteristics of the host matrix. The aim of this work is to study the influence of the composition and thermal annealing on the morphological and structural changes of thin films composed of Ag metal clusters embedded in a dielectric TiO2 matrix. Since changes in size, shape and distribution of the clusters are fundamental parameters for tailoring the properties of plasmonic materials, a set of films with different Ag concentrations was prepared. The optical properties and the thermal behaviour of the films were correlated with the structural and morphological changes promoted by annealing. The films were deposited by DC magnetron sputtering and in order to promote the clustering of the Ag nanoparticles the as-deposited samples were subjected to an in-air annealing protocol. It was demonstrated that the clustering of metallic Ag affects the optical response spectrum and the thermal behaviour of the films.This research was sponsored by FEDER funds through the COMPETE program (Programa Operacional Factores de Competitividade) and by FCT (Fundação para a Ciência e a Tecnologia), under the projects PEST-C/FIS/UI607/2013 and PEst-C/EME/UI0285/2013. The authors also acknowledge the financial support by the project Nano4color – Design and develop a new generation of color PVD coatings for decorative applications (FP7 EC R4SME Project No. 315286). J. Borges also acknowledges the support by the European social fund within the framework of realising the project “Support of inter-sectoral mobility and quality enhancement of research teams at Czech Technical University in Prague”, CZ.1.07/2.3.00/30.0034. C. Lopes acknowledges FCT for the PhD grant SFRH/BD/103373/2014. F.M. Couto acknowledges CAPES – Foundation, Ministry of Education of Brazil, Brasília – DF 70040-20, Brazil, funding by stage sandwich doctorate, through PDSE – Doctoral Program Sandwich