Structural design of a vertical antenna boresight 18.3 by 18.3-m planar near-field antenna measurement system

A large very precise near-field planar scanner was proposed for NASA Lewis Research Center. This scanner would permit near-field measurements over a horizontal scan plane measuring 18.3 m by 18.3 m. Large aperture antennas mounted with antenna boresight vertical could be tested up to 60 GHz. When such a large near field scanner is used for pattern testing, the antenna or antenna system under test does not have to be moved. Hence, such antennas and antenna systems can be positioned and supported to simulate configuration in zero g. Thus, very large and heavy machinery that would be needed to accurately move the antennas are avoided. A preliminary investigation was undertaken to address the mechanical design of such a challenging near-field antenna scanner. The configuration, structural design and results of a parametric NASTRAN structural optimization analysis are contained. Further, the resulting design was dynamically analyzed in order to provide resonant frequency information to the scanner mechanical drive system designers. If other large near field scanners of comparable dimensions are to be constructed, the information can be used for design optimization of these also

Development and application of a self-referencing glucose microsensor for the measurement of glucose consumption by pancreatic ?-cells

Glucose gradients generated by an artificial source and ?-cells were measured using an enzyme-based glucose microsensor, 8-?m tip diameter, as a self-referencing electrode. The technique is based on a difference measurement between two locations in a gradient and thus allows us to obtain real-time flux values with minimal impact of sensor drift or noise. Flux values were derived by incorporation of the measured differential current into Fick's first equation. In an artificial glucose gradient, a flux detection limit of 8.2 ± 0.4 pmol·cm-2·s-1 (mean ± SEM, n = 7) with a sensor sensitivity of 7.0 ± 0.4 pA/mM (mean ± SEM, n = 16) was demonstrated. Under biological conditions, the glucose sensor showed no oxygen dependence with 5 mM glucose in the bulk medium. The addition of catalase to the bulk medium was shown to ameliorate surface-dependent flux distortion close to specimens, suggesting an underlying local accumulation of hydrogen peroxide. Glucose flux from ?-cell clusters, measured in the presence of 5 mM glucose, was 61.7 ± 9.5 fmol·nL-1·s-1 (mean ± SEM, n = 9) and could be pharmacologically modulated. Glucose consumption in response to FCCP (1 ?M) transiently increased, subsequently decreasing to below basal by 93 ± 16 and 56 ± 6%, respectively (mean ± SEM, n = 5). Consumption was decreased after the application of 10 ?M rotenone by 74 ± 5% (mean ± SEM, n = 4). These results demonstrate that an enzyme-based amperometric microsensor can be applied in the self-referencing mode. Further, in obtaining glucose flux measurements from small clusters of cells, these are the first recordings of the real-time dynamic of glucose movements in a biological microenvironment. <br/

A non-invasive method for measuring preimplantation embryo physiology

Author Posting. © Cambridge University Press, 2000. This article is posted here by permission of Cambridge University Press for personal use, not for redistribution. The definitive version was published in Zygote 8 (2000): 15-24, doi:10.1017/S0967199400000782.The physiology of the early embryo may be indicative of embryo vitality and therefore methods for non-invasively monitoring physiological parameters from embryos could improve preimplantation diagnoses. The self-referencing electrophysiological technique is capable of non-invasive measurement of the physiology of individual cells by monitoring the movement of ions and molecules between the cell and the surrounding media. Here we use this technique to monitor gradients of calcium, potassium, oxygen and hydrogen peroxide around individual mouse preimplantation embryos. The calcium-sensitive electrode in self-referencing mode identified a region of elevated calcium concentration ([similar]0.25 pmol) surrounding each embryo. The calcium gradient surrounding embryos was relatively steep, such that the region of elevated calcium extended into the medium only 4 [mu]m from the embryo. By contrast, using an oxygen-sensitive electrode an extensive gradient of reduced dissolved oxygen concentration was measured surrounding the embryo and extended tens of micrometres into the medium. A gradient of neither potassium nor hydrogen peroxide was observed around unperturbed embryos. We also demonstrate that monitoring the physiology of embryos using the self-referencing technique does not compromise their subsequent development. Blastocysts studied with the self-referencing technique implanted and developed to term at the same frequency as did unexamined, control embryos. Therefore, the self-referencing electrode provides a valuable non-invasive technique for studying the physiology and pathophysiology of individual embryos without hindering their subsequent development.A portion of this work was funded by an NIH R21 #RR 12718–02 to D.L.K. and P.J.S.S., KO81099 to D.L.K. and NIH P41 RR01395 to P.J.S.S

Acute Aortic Dissection and Intramural Hematoma : A Systematic Review

IMPORTANCE: Acute aortic syndrome (AAS), a potentially fatal pathologic process within the aortic wall, should be suspected in patients presenting with severe thoracic pain and hypertension. AAS, including aortic dissection (approximately 90% of cases) and intramural hematoma, may be complicated by poor perfusion, aneurysm, or uncontrollable pain and hypertension. AAS is uncommon (approximately 3.5-6.0 per 100,000 patient-years) but rapid diagnosis is imperative as an emergency surgical procedure is frequently necessary.OBJECTIVE: To systematically review the current evidence on diagnosis and treatment of AAS.EVIDENCE REVIEW: Searches of MEDLINE, EMBASE, and the Cochrane Register of Controlled Trials for articles on diagnosis and treatment of AAS from June 1994 to January 29, 2016, were performed. Only clinical trials and prospective observational studies of 10 or more patients were included. Eighty-two studies (2 randomized clinical trials and 80 observational) describing 57,311 patients were reviewed.FINDINGS: Chest or back pain was the most commonly reported presenting symptom of AAS (61.6%-84.8%). Patients were typically aged 60 to 70 years, male (50%-81%), and had hypertension (45%-100%). Sensitivities of computerized tomography and magnetic resonance imaging for diagnosis of AAS were 100% and 95% to 100%, respectively. Transesophageal echocardiography was 86% to 100% sensitive, whereas D-dimer was 51.7% to 100% sensitive and 32.8% to 89.2% specific among 6 studies (n\u2009=\u2009876). An immediate open surgical procedure is needed for dissection of the ascending aorta, given the high mortality (26%-58%) and proximity to the aortic valve and great vessels (with potential for dissection complications such as tamponade). An RCT comparing endovascular surgical procedure to medical management for uncomplicated AAS in the descending aorta (n\u2009=\u200961) revealed no dissection-related deaths in either group. Endovascular surgical procedure was better than medical treatment (97% vs 43%, P\u2009<\u2009.001) for the primary end point of "favorable aortic remodeling" (false lumen thrombosis and no aortic dilation or rupture). The remaining evidence on therapies was observational, introducing significant selection bias.CONCLUSIONS AND RELEVANCE: Because of the high mortality rate, AAS should be considered and diagnosed promptly in patients presenting with acute chest or back pain and high blood pressure. Computerized tomography, magnetic resonance imaging, and transesophageal echocardiography are reliable tools for diagnosing AAS. Available data suggest that open surgical repair is optimal for treating type A (ascending aorta) AAS, whereas thoracic endovascular aortic repair may be optimal for treating type B (descending aorta) AAS. However, evidence is limited by the paucity of randomized trials

Multi-component Transparent Conducting Oxides: Progress in Materials Modelling

Transparent conducting oxides (TCOs) play an essential role in modern optoelectronic devices through their combination of electrical conductivity and optical transparency. We review recent progress in our understanding of multi-component TCOs formed from solid-solutions of ZnO, In2O3, Ga2O3 and Al2O3, with a particular emphasis on the contributions of materials modelling, primarily based on Density Functional Theory. In particular, we highlight three major results from our work: (i) the fundamental principles governing the crystal structures of multi-component oxide structures including (In2O3)(ZnO)n, named IZO, and (In2O3)m(Ga2O3)l(ZnO)n, named IGZO; (ii) the relationship between elemental composition and optical and electrical behaviour, including valence band alignments; (iii) the high-performance of amorphous oxide semiconductors. From these advances, the challenge of the rational design of novel electroceramic materials is discussed.Comment: Part of a themed issue of Journal of Physics: Condensed Matter on "Semiconducting Oxides". In Press (2011

Freeze-out configuration properties in the 197Au + 197Au reaction at 23 AMeV

Data from the experiment on the 197Au + 197Au reaction at 23 AMeV are analyzed with an aim to find signatures of exotic nuclear configurations such as toroid-shaped objects. The experimental data are compared with predictions of the ETNA code dedicated to look for such configurations and with the QMD model. A novel criterion of selecting events possibly resulting from the formation of exotic freeze-out configurations, "the efficiency factor", is tested. Comparison between experimental data and model predictions may indicate for the formation of flat/toroidal nuclear systems

Projected Quasi-particle Perturbation theory

The BCS and/or HFB theories are extended by treating the effect of four quasi-particle states perturbatively. The approach is tested on the pairing hamiltonian, showing that it combines the advantage of standard perturbation theory valid at low pairing strength and of non-perturbative approaches breaking particle number valid at higher pairing strength. Including the restoration of particle number, further improves the description of pairing correlation. In the presented test, the agreement between the exact solution and the combined perturbative + projection is almost perfect. The proposed method scales friendly when the number of particles increases and provides a simple alternative to other more complicated approaches

Rabies Management Implications Based on Raccoon Population Density Indexes

An estimate or index of target species density is important in determining oral rabies vaccination (ORV) bait densities to control and eliminate specific rabies variants. From 1997–2011, we indexed raccoon (Procyon lotor) densities 253 times based on cumulative captures on 163 sites from Maine to Alabama, USA, near ORV zones created to prevent raccoon rabies from spreading to new areas. We conducted indexing under a common cage trapping protocol near the time of annual ORV to aid in bait density decisions. Unique raccoons (n = 8,415) accounted for 68.0% of captures (n = 12,367). We recaptured raccoons 2,669 times. We applied Schnabel and Huggins mark‐recapture models on sites with ≥3 years of capture data and ≥25% recaptures as context for raccoon density indexes (RDIs). Simple linear relationships between RDIs and mark‐recapture estimates supported application of our 2 index. Raccoon density indexes ranged from 0.0–56.9 raccoons/km . For bait density decisions, we evaluated RDIs in the following 4 raccoon density groups, which were statistically different: (0.0–5.0 [n = 70], 5.1–15.0 [n = 129], 15.1–25.0 [n = 31], and \u3e25.0 raccoons/km2 [n = 23]). Mean RDI was positively associated with a higher percentage of developed land cover and a lower percentage of evergreen forest. Non‐target species composition (excluding recaptured raccoons) accounted for 32.0% of captures. Potential bait competitors accounted for 76.5% of non‐targets. The opossum (Didelphis virginiana) was the primary potential bait competitor from 27°N to 44°N latitude, north of which it was numerically replaced by the striped skunk (Mephitis mephitis). We selected the RDI approach over mark-recapture methods because of costs, geographic scope, staff availability, and the need for supplemental serologic samples. The 4 density groups provided adequate sensitivity to support bait density decisions for the current 2 bait density options. Future improvements to the method include providing random trapping locations to field personnel to prevent trap clustering and marking non‐targets to better characterize bait competitors

Dynamical mean-field approach to materials with strong electronic correlations

We review recent results on the properties of materials with correlated electrons obtained within the LDA+DMFT approach, a combination of a conventional band structure approach based on the local density approximation (LDA) and the dynamical mean-field theory (DMFT). The application to four outstanding problems in this field is discussed: (i) we compute the full valence band structure of the charge-transfer insulator NiO by explicitly including the p-d hybridization, (ii) we explain the origin for the simultaneously occuring metal-insulator transition and collapse of the magnetic moment in MnO and Fe2O3, (iii) we describe a novel GGA+DMFT scheme in terms of plane-wave pseudopotentials which allows us to compute the orbital order and cooperative Jahn-Teller distortion in KCuF3 and LaMnO3, and (iv) we provide a general explanation for the appearance of kinks in the effective dispersion of correlated electrons in systems with a pronounced three-peak spectral function without having to resort to the coupling of electrons to bosonic excitations. These results provide a considerable progress in the fully microscopic investigations of correlated electron materials.Comment: 24 pages, 14 figures, final version, submitted to Eur. Phys. J. for publication in the Special Topics volume "Cooperative Phenomena in Solids: Metal-Insulator Transitions and Ordering of Microscopic Degrees of Freedom

Fabry disease and COVID-19: International expert recommendations for management based on real-world experience

The rapid spread of coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 has raised questions about Fabry disease (FD) as an independent risk factor for severe COVID-19 symptoms. Available real-world data on 22 patients from an international group of healthcare providers reveals that most patients with FD experience mild-to-moderate COVID-19 symptoms with an additional complication of Fabry pain crises and transient worsening of kidney function in some cases; however, two patients over the age of 55 years with renal or cardiac disease experienced critical COVID-19 complications. These outcomes support the theory that pre-existent tissue injury and inflammation may predispose patients with more advanced FD to a more severe course of COVID-19, while less advanced FD patients do not appear to be more susceptible than the general population. Given these observed risk factors, it is best to reinforce all recommended safety precautions for individuals with advanced FD. Diagnosis of FD should not preclude providing full therapeutic and organ support as needed for patients with FD and severe or critical COVID-19, although a FD-specific safety profile review should always be conducted prior to initiating COVID-19-specific therapies. Continued specific FD therapy with enzyme replacement therapy, chaperone therapy, dialysis, renin–angiotensin blockers or participation to clinical trials during the pandemic is recommended as FD progression will only increase susceptibility to infection. In order to compile outcome data and inform best practices, an international registry for patients affected by Fabry and infected by COVID-19 should be established