A domain-specific design architecture for composite material design and aircraft part redesign

Advanced composites have been targeted as a 'leapfrog' technology that would provide a unique global competitive position for U.S. industry. Composites are unique in the requirements for an integrated approach to designing, manufacturing, and marketing of products developed utilizing the new materials of construction. Numerous studies extending across the entire economic spectrum of the United States from aerospace to military to durable goods have identified composites as a 'key' technology. In general there have been two approaches to composite construction: build models of a given composite materials, then determine characteristics of the material via numerical simulation and empirical testing; and experience-directed construction of fabrication plans for building composites with given properties. The first route sets a goal to capture basic understanding of a device (the composite) by use of a rigorous mathematical model; the second attempts to capture the expertise about the process of fabricating a composite (to date) at a surface level typically expressed in a rule based system. From an AI perspective, these two research lines are attacking distinctly different problems, and both tracks have current limitations. The mathematical modeling approach has yielded a wealth of data but a large number of simplifying assumptions are needed to make numerical simulation tractable. Likewise, although surface level expertise about how to build a particular composite may yield important results, recent trends in the KBS area are towards augmenting surface level problem solving with deeper level knowledge. Many of the relative advantages of composites, e.g., the strength:weight ratio, is most prominent when the entire component is designed as a unitary piece. The bottleneck in undertaking such unitary design lies in the difficulty of the re-design task. Designing the fabrication protocols for a complex-shaped, thick section composite are currently very difficult. It is in fact this difficulty that our research will address

Central Acceptance Testing for Camera Technologies for CTA

The Cherenkov Telescope Array (CTA) is an international initiative to build the next generation ground based very-high energy gamma-ray observatory. It will consist of telescopes of three different sizes, employing several different technologies for the cameras that detect the Cherenkov light from the observed air showers. In order to ensure the compliance of each camera technology with CTA requirements, CTA will perform central acceptance testing of each camera technology. To assist with this, the Camera Test Facilities (CTF) work package is developing a detailed test program covering the most important performance, stability, and durability requirements, including setting up the necessary equipment. Performance testing will include a wide range of tests like signal amplitude, time resolution, dead-time determination, trigger efficiency, performance testing under temperature and humidity variations and several others. These tests can be performed on fully-integrated cameras using a portable setup at the camera construction sites. In addition, two different setups for performance tests on camera sub-units are being built, which can provide early feedback for camera development. Stability and durability tests will include the long-term functionality of movable parts, water tightness of the camera housing, temperature and humidity cycling, resistance to vibrations during transport or due to possible earthquakes, UV-resistance of materials and several others. Some durability tests will need to be contracted out because they will need dedicated equipment not currently available within CTA. The planned test procedures and the current status of the test facilities will be presented.Comment: 8 pages, 3 figures. In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.0589

Design of light concentrators for Cherenkov telescope observatories

The Cherenkov Telescope Array (CTA) will be the largest cosmic gamma ray detector ever built in the world. It will be installed at two different sites in the North and South hemispheres and should be operational for about 30 years. In order to cover the desired energy range, the CTA is composed of typically 50-100 collecting telescopes of various sizes (from 6 to 24-m diameters). Most of them are equipped with a focal plane camera consisting of 1500 to 2000 Photomultipliers (PM) equipped with light concentrating optics, whose double function is to maximize the amount of Cherenkov light detected by the photo-sensors, and to block any stray light originating from the terrestrial environment. Two different optical solutions have been designed, respectively based on a Compound Parabolic Concentrator (CPC), and on a purely dioptric concentrating lens. In this communication are described the technical specifications, optical designs and performance of the different solutions envisioned for all these light concentrators. The current status of their prototyping activities is also given

Care of bullet-related injuries: A cross-sectional study of instructions and prescriptions provided on discharge from the emergency department

INTRODUCTION: There are more than 80,000 emergency department (ED) visits for non-fatal bullet-related injuries (BRI) per year in the United States. Approximately half of these patients are discharged home from the ED. Our objective in this study was to characterize the discharge instructions, prescriptions, and follow-up plans provided to patients discharged from the ED after BRI. METHODS: This was a single-center, cross-sectional study of the first 100 consecutive patients who presented to an urban, academic, Level I trauma center ED with an acute BRI beginning on January 1, 2020. We queried the electronic health record for patient demographics, insurance status, cause of injury, hospital arrival and discharge timestamps, discharge prescriptions, and documented instructions regarding wound care, pain management, and follow-up plans. We analyzed data using descriptive statistics and chi-square tests. RESULTS: During the study period, 100 patients presented to the ED with an acute firearm injury. Patients were predominantly young (median age 29, interquartile range 23-38 years), male (86%), Black (85%), non-Hispanic (98%), and uninsured (70%). We found that 12% of patients did not receive any type of written wound care instruction, while 37% received discharge paperwork that included instructions to take both an NSAID and acetaminophen. Fifty-one percent of patients received an opioid prescription, with a range from 3-42 tablets (median 10 tablets). The proportion of patients receiving an opioid prescription was significantly higher among White patients (77%) than among Black patients (47%). CONCLUSION: There is variability in prescriptions and instructions provided to survivors of bullet injuries upon ED discharge at our institution. Our data indicates that standardized discharge protocols could improve quality of care and equity in the treatment of patients who have survived a BRI. Current variable quality in discharge planning is an entry point for structural racism and disparity

The H.E.S.S. extragalactic sky

The H.E.S.S. Cherenkov telescope array, located on the southern hemisphere in Namibia, studies very high energy (VHE; E>100 GeV) gamma-ray emission from astrophysical objects. During its successful operations since 2002 more than 80 galactic and extra-galactic gamma-ray sources have been discovered. H.E.S.S. devotes over 400 hours of observation time per year to the observation of extra-galactic sources resulting in the discovery of several new sources, mostly AGNs, and in exciting physics results e.g. the discovery of very rapid variability during extreme flux outbursts of PKS 2155-304, stringent limits on the density of the extragalactic background light (EBL) in the near-infrared derived from the energy spectra of distant sources, or the discovery of short-term variability in the VHE emission from the radio galaxy M 87. With the recent launch of the Fermi satellite in 2008 new insights into the physics of AGNs at GeV energies emerged, leading to the discovery of several new extragalactic VHE sources. Multi-wavelength observations prove to be a powerful tool to investigate the production mechanism for VHE emission in AGNs. Here, new results from H.E.S.S. observations of extragalactic sources will be presented and their implications for the physics of these sources will be discussed.Comment: 8 pages, 6 figures, invited review talk, in the proceedings of the "International Workshop on Beamed and Unbeamed Gamma-Rays from Galaxies" 11-15 April 2011, Lapland Hotel Olos, Muonio, Finland, Journal of Physics: Conference Series Volume 355, 201

New AGNs discovered by H.E.S.S

During the last year, six new Active Galactic Nuclei (AGN) have been discovered and studied by H.E.S.S. at Very High Energies (VHE). Some of these recent discoveries have been made thanks to new enhanced analysis methods and are presented at this conference for the first time. The three blazars 1ES 0414+009, SHBL J001355.9-185406 and 1RXS J101015.9-311909 have been targeted for observation due to their high levels of radio and X-ray fluxes, while the Fermi/LAT catalogue of bright sources triggered the observation of PKS 0447-439 and AP Librae. Additionally, the BL Lac 1ES 1312-423 was discovered in the field-of-view (FoV) of Centaurus A thanks to the large exposure dedicated by H.E.S.S. to this particularly interesting source. The newly-discovered sources are presented here and in three companion presentations at this conference.Comment: 8 pages, 3 figures, proceeding from the 25th Texas Symposium on Relativistic Astrophysics (Heidelberg, Germany, 2010

Object recognition in lake and estuary environments

Traditionally, autonomous underwater vehicles employ multiple configurations of sensor payloads in order to accomplish a specific mission. Due to advances in imaging technology, imaging sonar arrays and optical imaging devices are among these payloads. Independent of mission specifics, the majority of imaging data is either stored onboard the vehicle or transmitted to a base station for later analysis. In either situation, there is limited local real time analysis and limited mission duration. One focus for increasing real time analysis is the reduction of image information. By using image processing techniques, such as edge detection, less relevant information can be eliminated while preserving important object features. This reduced object information is then used as inputs to a neural network. A neural network is a cognitive algorithm which has the ability to adapt to achieve desired tasks. These networks are able to generalize and make decisions based on partial or limited input information. The goal of this research is to create an autonomous in-situ recognition system for marine environments, specifically the processing and classification of object image data. Image information will be applied to a neural network approach to mimic higher order decision making in an artificial cognitive algorithm

Optimizing projectional radiographic imaging of the abdomen of obese patients: an e-Delphi study

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this record.Purpose: Obesity is increasing in prevalence globally, with increased demands placed on radiology departments to image obese patients to assist with diagnosis and management. The aim of this study was to determine perceived best practice techniques currently used in clinical practice for projectional radiography of the abdomen for obese patients with the aim to help elucidate areas for future research and education needs in this field. Experimental Design: A two round e-Delphi study was undertaken to establish a consensus within a reference group of expert Australian clinical educator diagnostic radiographers (CEDRs). Initially, a conceptual map of issues regarding imaging obese patients was undertaken by analysing interview transcripts of 12 CEDRs. This informed an online questionnaire design used in Delphi rounds 1 and 2. A consensus threshold was set <75% “agreement/disagreement”, with 15 and 14 CEDRs participating in rounds 1 and 2, respectively. Results: Seven of the 11 statements reach consensus after round 2. Consensus on using a combination of higher peak kilovoltage (kVp) and milliampere-seconds (mAs) to increase radiation exposure increased source-to-image distance and tighter collimation was achieved. There was no consensus regarding patient positioning practices or patient communication strategies. The expert group reported the importance of personal confidence and treating patients as individuals when applying techniques. Conclusion: Diversity of experts' opinions and current practice may be due to the variations in obese patients’ size and presentation. Therefore, there is a need for extensive empirical evidence to underpin practice and education resources for radiographers when imaging obese patients