1,693 research outputs found
Variable cavity volume tooling for high-performance resin infusion moulding
This article describes the research carried out by Warwick under the BAE Systems/EPSRC programme ‘Flapless Aerial Vehicles Integrated Interdisciplinary Research – FLAVIIR’. Warwick's aim in FLAVIIR was to develop low-cost innovative tooling technologies to enable the affordable manufacture of complex composite aerospace structures and to help realize the aim of the Grand Challenge of maintenance-free, low-cost unmanned aerial vehicle manufacture. This article focuses on the evaluation of a novel tooling process (variable cavity tooling) to enable the complete infusion of resin throughout non-crimp fabric within a mould cavity under low (0.1 MPa) injection pressure. The contribution of the primary processing parameters to the mechanical properties of a carbon composite component (bulk-head lug section), and the interactions between parameters, was determined. The initial mould gap (di) was identified as having the most significant effect on all measured mechanical properties, but complex interactions between di, n (number of fabric layers), and vc (mould closure rate) were observed. The process capability was low due to the manual processing, but was improved through process optimization, and delivered properties comparable to high-pressure resin transfer moulding
Integrated food safety and nutrition assessments in the dairy cattle value chain in Tanzania
The consumption of even small amounts of animal-source foods has the potential to improve nutrition, especially in vulnerable households. However, scaling up their production bears food safety risks that are often overlooked due to a disconnect between human nutrition and animal sciences. The aim of this scoping study in Tanzania was to identify opportunities for nutritional and food safety benefits from cow milk
Experimental approaches to the difference in the Casimir force through the varying optical properties of boundary surface
We propose two novel experiments on the measurement of the Casimir force
acting between a gold coated sphere and semiconductor plates with markedly
different charge carrier densities. In the first of these experiments a
patterned Si plate is used which consists of two sections of different dopant
densities and oscillates in the horizontal direction below a sphere. The
measurement scheme in this experiment is differential, i.e., allows the direct
high-precision measurement of the difference of the Casimir forces between the
sphere and sections of the patterned plate or the difference of the equivalent
pressures between Au and patterned parallel plates with static and dynamic
techniques, respectively. The second experiment proposes to measure the Casimir
force between the same sphere and a VO film which undergoes the
insulator-metal phase transition with the increase of temperature. We report
the present status of the interferometer based variable temperature apparatus
developed to perform both experiments and present the first results on the
calibration and sensitivity. The magnitudes of the Casimir forces and pressures
in the experimental configurations are calculated using different theoretical
approaches to the description of optical and conductivity properties of
semiconductors at low frequencies proposed in the literature. It is shown that
the suggested experiments will aid in the resolution of theoretical problems
arising in the application of the Lifshitz theory at nonzero temperature to
real materials. They will also open new opportunities in nanotechnology.Comment: 23 pages of the text, 2 tables, and captions of 12 figures (to appear
in Phys. Rev. A
A lean six sigma framework for continuous and incremental improvement in the oil and gas sector
This article aims to explore synergies between Lean Production (LP) and Six Sigma principles in order to propose a Lean Six Sigma (LSS) framework for continuous and incremental improvement in the oil and gas sector. The Three-Dimensional LSS Framework seeks to provide various combinations about the integration between LP principles, DMAIC cycle and PDCA cycle to support operations management needs. Design/methodology/approach - The research method is composed of two main steps: (i) diagnostic of current problems and proposition of a conceptual framework that qualitatively integrates synergistic aspects of LP and Six Sigma; and (ii) analysis of the application of the construct through semi-structured interviews with leaders from oil and gas companies to assess and validate the proposed framework. Findings - As a result, a conceptual framework of LSS is developed contemplating the integration of LP and Six Sigma and providing a systemic and holistic approach to problemsolving through continuous and incremental improvement in the oil and gas sector. Originality/value - This research is different from previous studies because it integrates LP principles, DMAIC and PDCA cycles into a unique framework that fulfils a specific need of oil and gas sector. It presents a customized LSS framework that guides wastes and costs reduction, while enhances quality and reduces process variability to elevate efficiency in operations management of this sector. The paper type is an original research that present new and original scientific findings.N/
Benevolent characteristics promote cooperative behaviour among humans
Cooperation is fundamental to the evolution of human society. We regularly
observe cooperative behaviour in everyday life and in controlled experiments
with anonymous people, even though standard economic models predict that they
should deviate from the collective interest and act so as to maximise their own
individual payoff. However, there is typically heterogeneity across subjects:
some may cooperate, while others may not. Since individual factors promoting
cooperation could be used by institutions to indirectly prime cooperation, this
heterogeneity raises the important question of who these cooperators are. We
have conducted a series of experiments to study whether benevolence, defined as
a unilateral act of paying a cost to increase the welfare of someone else
beyond one's own, is related to cooperation in a subsequent one-shot anonymous
Prisoner's dilemma. Contrary to the predictions of the widely used inequity
aversion models, we find that benevolence does exist and a large majority of
people behave this way. We also find benevolence to be correlated with
cooperative behaviour. Finally, we show a causal link between benevolence and
cooperation: priming people to think positively about benevolent behaviour
makes them significantly more cooperative than priming them to think
malevolently. Thus benevolent people exist and cooperate more
EMS Systems: Foundations for the Future
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/73462/1/j.1553-2712.1999.tb00094.x.pd
Obtención de un complejo ovoalbúmina-antioxidantes provenientes del té verde (Camellia sinensis) por el método de gelación iónica.
En la obtención de un complejo ovoalbúmina-antioxidantes provenientes del té verde (Camellia sinensis) predominan las catequinas, se realizaron pruebas a distintos valores de pH, se obtuvo un mayor porcentaje de encapsulación a pH 4. Se emplearon distintas concentraciones de ovoalbúmina a pH4, obteniéndose una mayor eficiencia con 0.5% p/v de proteína. Esta metodología de encapsulación que se fundamenta en el método de gelación iónica, tiene como beneficio para la industria alimentaria y/o desarrollo de alimentos funcionales, la protección de los antioxidantes por medio de un complejo que se puede utilizar como aditivo en alimentos y evitar la degradación que originan diversos procesos o
condiciones de almacenamiento
Recommended from our members
Detailed Comparison of Blast Effects in Air and Vacuum
Although blast mitigation is most often achieved with solid shielding, ambient gas pressure can also affect the coupling of shock waves to solid targets. In this work the role of air as an energy transfer medium was examined experimentally by subjecting identical large-area rectangular witness plates to short-range blast effects in air and vacuum ({approx}50 mtorr) at 25 C. The expanding reactant front of 3 kg C4 charges was observed by fast camera to be cylindrically symmetric in both air and vacuum. The horizontal component of the reactant cloud velocity (perpendicular to the witness plates) was constant in both cases, with values of 3.0 and 5.9 km/s for air and vacuum, respectively. As a result of the blast, witness plates were plastically deformed into a shallow dish geometry, with local maxima 30 and 20 mm deep for air and vacuum, respectively. The average plate deflection from the air blast was 11 mm, {approx}10% deeper than the average vacuum plate deflection. Shock pressure estimates were made with a simple impedance-matching model, and indicate peak values in the 30-50 MPa range are consistent with the reactant cloud density and velocity. However, more detailed analysis is necessary to definitely establish the mechanisms by which air couples shock energy to the plates
New solar axion search in CAST with He filling
The CERN Axion Solar Telescope (CAST) searches for conversion in
the 9 T magnetic field of a refurbished LHC test magnet that can be directed
toward the Sun. Two parallel magnet bores can be filled with helium of
adjustable pressure to match the X-ray refractive mass to the axion
search mass . After the vacuum phase (2003--2004), which is optimal for
eV, we used He in 2005--2007 to cover the mass range of
0.02--0.39 eV and He in 2009--2011 to scan from 0.39--1.17 eV. After
improving the detectors and shielding, we returned to He in 2012 to
investigate a narrow range around 0.2 eV ("candidate setting" of our
earlier search) and 0.39--0.42 eV, the upper axion mass range reachable with
He, to "cross the axion line" for the KSVZ model. We have improved the
limit on the axion-photon coupling to (95% C.L.), depending on the pressure settings. Since 2013, we
have returned to vacuum and aim for a significant increase in sensitivity.Comment: CAST Collaboration 6 pages 3 figure
Results and perspectives of the solar axion search with the CAST experiment
The status of the solar axion search with the CERN Axion Solar Telescope
(CAST) will be presented. Recent results obtained by the use of He as a
buffer gas has allowed us to extend our sensitivity to higher axion masses than
our previous measurements with He. With about 1 h of data taking at each of
252 different pressure settings we have scanned the axion mass range 0.39 eV 0.64 eV. From the absence of an excess of x rays when the
magnet was pointing to the Sun we set a typical upper limit on the axion-photon
coupling of g GeV at 95% C.L., the
exact value depending on the pressure setting. CAST published results represent
the best experimental limit on the photon couplings to axions and other similar
exotic particles dubbed WISPs (Weakly Interacting Slim Particles) in the
considered mass range and for the first time the limit enters the region
favored by QCD axion models. Preliminary sensitivities for axion masses up to
1.16 eV will also be shown reaching mean upper limits on the axion-photon
coupling of g GeV at 95% C.L.
Expected sensibilities for the extension of the CAST program up to 2014 will be
presented. Moreover long term options for a new helioscope experiment will be
evoked.Comment: 4 pages, 2 pages, to appear in the proceedings of the 24th Rencontres
de Blois V2 A few affiliations were not corrected in previous version V3
Author adde
- …