Adrenergic and cholinergic innervation of the atrioventricular valves in chinchilla (Chinchilla laniger)

The arrangement of autonomic fibres was studied in the cardiac atrioventricular valves of small chinchillas. The dissected valves were stained entirely using the modified histochemical acetylcholine esterase technique (AChE) and the SPG-De la Torre method. Double immunocytochemical staining was also used for the expression of vesicular acetylcholine transporter (VAChT) and dopamine beta hydroxylase (DBH). The study showed the presence of both cholinergic and adrenergic fibres, forming a kind of network on all cusps of both valves. The adrenergic network is always more strongly represented than the cholinergic network. The cholinergic nerve network of the “parietal” part formed mainly the parallel arrangement. As we move towards the free parts of the cusps, the arrangement becomes netted and radiant. The adrenergic fibres formed only the netted arrangement, which was the most dense in the peripheral (parietal) part of the cusps. Some of the fibres in the vicinity of tendinous cords extended as far as the papillary muscles. Double immunocytochemical tests confirmed the presence and distribution of DBH- and VAChT-positive fibres. Some fibres (especially within the tendinous cords) show VAChT and DBH colocalisation

Four left renal arteries — a rare variant of kidney arterial supply

We describe the arterial supply of a human kidney harvested post-mortem from a 75-year-old female volunteer body donor. The kidney was analysed with con- trast-enhanced computed tomography (CT), and corrosion casting was used to reveal the kidney’s angio-architecture. In the left kidney, we observed four renal arteries, each originating directly from the abdominal aorta. Three renal arteries, including the main renal artery, coursed through the renal hilum, and the fourth renal artery reached the lower kidney pole. The supply areas of each of the four renal arteries were analysed with a three-dimensional reconstruction of CT images and with corrosion casting. There were no clear boundaries between the areas supplied by the four renal arteries because their branches overlapped in most kidney segments.

Anatomical and histological data on the ciliary ganglion in the Egyptian spiny mouse (Acomys cahirinus Desmarest)

The morphology and topography of the ciliary ganglion in the Egyptian spiny mouse were studied with use of histochemical and histological techniques. The ciliary ganglion of the Egyptian spiny mouse consisted of between 3 and 4 agglomerations of nerve cells. The largest was situated at the point where the ventral branch of the oculomotor nerve divides into two branches. The next two smaller aggregations were located on the superior and lateral surfaces of the optic nerve where it crossed the oculomotor nerve. From the main agglomerations of neurocytes arose between 3 and 4 intensively stained postganglionic cholinergic fibres. These followed the optic nerve to the eyeball. On the crosssections of these bundles small agglomerations of neurocytes were observed. These decreased in size to only 2 or 3 cells towards the sclera. The ganglionic neurocytes in the largest ganglion varied from 15 to 30 µm in diameter. They were distributed uniformly over the whole surface of the sections. All the ganglia had connective capsules

Manufacturing cement-based materials and building products via extrusion: From laboratory to factory

Manufacturing is critical to the economies of the UK and many other countries in the rest of the world. However, manufacturing of cement-based materials and building products predominantly remains based on old batch processing such as casting and pressing technologies and this may limit the applications and performance of the materials and products formed. In this paper, research is reported on transforming manufacturing of precast cement-based materials and building products from in batches to continuous processes via extrusion. Techniques used for producing plastic products are transferred into manufacturing cement-based building products like flat and corrugated sheet tiles, down pipes, door/window frames, door panels, solid wall/facade panels, honeycomb wall/facade panels etc. at laboratory and factory scales. In combination with sustainable cementitious materials with low carbon and low energy as matrix, this enables sustainable building products with key characteristics required by the 21st century can be manufactured via extrusion. The cement-based building products extrusion technique has been successfully transferred to industry. For instance, fibre reinforced cement-based partition wall panels, with a honeycomb cross section as large as 600 mm wide and 90 mm high, have been produced by a continuous extrusion process in a precast concrete products factory in Hangzhou, China.European Commission Seventh Framework Programme, (grant agreement no. 262954) and from the Hong Kong Research Grants Council through grants 6091/00E, 6226/01E, 6273/03E and 6167/06

Rare morphological variants of the bones: epicondylar processes, metopic suture and Wormian bones in XVIII century skeleton

Background: Analysis of the female skeleton from the 18th century revealed a collection of morphological changes. Materials and methods: Anthropological evaluation and dental X-ray techniques allowed the age to be determined at 12–13 years. Results: The distal parts of the both humerus bones had distinct, supracondylar processes of about 5 mm at the medial-lateral surface. The frontal bone had a well-preserved metopic suture along the entire length of the squama. There were also two Wormian bones (Inca bones), asymmetrical mastoid foramen, and only left non-obliterated condylar canal. Conclusions: The skull measurements allowed the cranial index to be determined — 93.5 (brachycephalia) and height-length index — 98.6 (akrocephalus). Moreover, X-ray analysis of incomplete dentition was made

Environmental and Botanical Controls on Peatification - A Comparative Study of Two New Zealand Restiad Bogs Using Py-GC/MS, Petrography and Fungal Analysis

This study shows that chemical properties of two restiad species, Empodisma minus and Sporadanthus traversii, may contribute to their success as peat-formers in a climate of the North Island of New Zealand which is not conducive to raised mire development. Unlike Sphagnum, the equivalent northern hemisphere peat-former, restiads possess lignin in their tissues. In addition, the presence of non-lignin polyphenols (including tannins and phenolic acids) in restiads may be an important factor in peat formation due to the allelopathic decay retardation. Patterns of degradation of plant biopolymers have been examined and the pathway of degradation of monocotyledons (loss of non-lignin phenolic fraction, depolymerization via modification of side chains of -O-4 lignin, depletion of hemicelluloses) was identified. Trends in chemical change for lignin were not necessarily paralleled by a similar change in the degree of plant structure preservation—an expression of a complex nature of degradation involving the contributions of several processes affecting different classes of biopolymers to different extents. A further finding of this study is that the degree of lignin breakdown, together with proportions of fungal hyphae and petrographic character, indicate that one of the two bogs studied, Moanatuatua, has undergone far more aerobic decay throughout its development than has its climatic and vegetational equivalent, Kopouatai. This is thought to be due to differing water tables in the two sedimentary environments. Moanatuatua developed in a flood plain distant from the sea with a migrating river system, while Kopouatai developed near the sea. A high degree of natural peat decomposition at Moanatuatua most probably precluded any further rapid decay after recent agricultural drainage

Design and Vertical Tests of SPS-series Double-Quarter Wave (DQW) Cavity Prototypes for the HL-LHC Crab Cavity System

Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is provided by its fundamental mode. Each HL-LHC DQW cavity shall provide a nominal deflecting voltage of 3.4 MV, although up to 5.0 MV may be required. A Proof-of-Principle (PoP) DQW cavity was limited by quench at 4.6 MV. This paper describes a new, highly optimized cavity, designated DQW SPS-series, which satisfies dimensional, cryogenic, manufacturing and impedance requirements for beam tests at SPS and operation in LHC. Two prototypes of this DQW SPS-series were fabricated by US industry and cold tested after following conventional SRF surface treatment. Both units outperformed the PoP cavity, reaching a deflecting voltage of 5.3-5.9 MV. This voltage - the highest reached by a DQW cavity - is well beyond the nominal voltage of 3.4 MV and may even operate at the ultimate voltage of 5.0MVwith sufficient margin. This paper covers fabrication, surface preparation and cryogenic RF test results and implications

MRI of the lung (3/3)-current applications and future perspectives

BACKGROUND: MRI of the lung is recommended in a number of clinical indications. Having a non-radiation alternative is particularly attractive in children and young subjects, or pregnant women. METHODS: Provided there is sufficient expertise, magnetic resonance imaging (MRI) may be considered as the preferential modality in specific clinical conditions such as cystic fibrosis and acute pulmonary embolism, since additional functional information on respiratory mechanics and regional lung perfusion is provided. In other cases, such as tumours and pneumonia in children, lung MRI may be considered an alternative or adjunct to other modalities with at least similar diagnostic value. RESULTS: In interstitial lung disease, the clinical utility of MRI remains to be proven, but it could provide additional information that will be beneficial in research, or at some stage in clinical practice. Customised protocols for chest imaging combine fast breath-hold acquisitions from a "buffet" of sequences. Having introduced details of imaging protocols in previous articles, the aim of this manuscript is to discuss the advantages and limitations of lung MRI in current clinical practice. CONCLUSION: New developments and future perspectives such as motion-compensated imaging with self-navigated sequences or fast Fourier decomposition MRI for non-contrast enhanced ventilation- and perfusion-weighted imaging of the lung are discussed. Main Messages • MRI evolves as a third lung imaging modality, combining morphological and functional information. • It may be considered first choice in cystic fibrosis and pulmonary embolism of young and pregnant patients. • In other cases (tumours, pneumonia in children), it is an alternative or adjunct to X-ray and CT. • In interstitial lung disease, it serves for research, but the clinical value remains to be proven. • New users are advised to make themselves familiar with the particular advantages and limitations

Serum neurofilament dynamics predicts neurodegeneration and clinical progression in presymptomatic Alzheimer's disease

Neurofilament light chain (NfL) is a promising fluid biomarker of disease progression for various cerebral proteopathies. Here we leverage the unique characteristics of the Dominantly Inherited Alzheimer Network and ultrasensitive immunoassay technology to demonstrate that NfL levels in the cerebrospinal fluid (n = 187) and serum (n = 405) are correlated with one another and are elevated at the presymptomatic stages of familial Alzheimer's disease. Longitudinal, within-person analysis of serum NfL dynamics (n = 196) confirmed this elevation and further revealed that the rate of change of serum NfL could discriminate mutation carriers from non-mutation carriers almost a decade earlier than cross-sectional absolute NfL levels (that is, 16.2 versus 6.8 years before the estimated symptom onset). Serum NfL rate of change peaked in participants converting from the presymptomatic to the symptomatic stage and was associated with cortical thinning assessed by magnetic resonance imaging, but less so with amyloid-β deposition or glucose metabolism (assessed by positron emission tomography). Serum NfL was predictive for both the rate of cortical thinning and cognitive changes assessed by the Mini-Mental State Examination and Logical Memory test. Thus, NfL dynamics in serum predict disease progression and brain neurodegeneration at the early presymptomatic stages of familial Alzheimer's disease, which supports its potential utility as a clinically useful biomarker

The development and piloting of the graduate assessment of preparedness for practice (GAPP) questionnaire

Introduction Most new dental graduates in the UK begin their professional career following a year in dental foundation training (DFT). There has been little investigation of how prepared they feel for independent general dental practice across all four domains of the General Dental Council’s curriculum ‘Preparing for practice’. This paper describes the development of the Graduate Assessment of Preparedness for Practice (GAPP) questionnaire to address this. Methodology The GAPP questionnaire was developed and piloted using a cohort of educational supervisors (ESs) and foundation dentists (FDs). The questionnaire comprised three parts, the first of which collected respondent demographic data. The second was based on Preparing for practice and was used to develop 34 ‘competence areas’ and required a tick-box response on a 7‑category Likert Scale. The third comprised free text questions in order to further explore the subject’s responses. Results Pilot feedback was positive, the statements were felt to be clear and unambiguous, allowing them sufficient scope to state their position. The pilot study informed small cosmetic changes to the GAPP questionnaire and inclusion of a ‘comments’ column for respondents to qualify their responses. The pilot results indicated that both FDs and their ESs felt that at ten months of DFT, the FDs were very well prepared for independent general dental practice. Discussion The paper describes the important considerations relating to the reliability and validity of the GAPP questionnaire. Conclusions GAPP appears to be a suitable questionnaire to measure preparedness of new graduates with a degree of reliability and validity. The instrument is designed to be simple to complete and provides a useful analytical instrument for both self-assessment of competence and for wider use within dental education