4,044 research outputs found
Studying DNA Double-Strand Break Repair: An Ever-Growing Toolbox
To ward off against the catastrophic consequences of persistent DNA double-strand breaks (DSBs), eukaryotic cells have developed a set of complex signaling networks that detect these DNA lesions, orchestrate cell cycle checkpoints and ultimately lead to their repair. Collectively, these signaling networks comprise the DNA damage response (DDR). The current knowledge of the molecular determinants and mechanistic details of the DDR owes greatly to the continuous development of ground-breaking experimental tools that couple the controlled induction of DSBs at distinct genomic positions with assays and reporters to investigate DNA repair pathways, their impact on other DNA-templated processes and the specific contribution of the chromatin environment. In this review, we present these tools, discuss their pros and cons and illustrate their contribution to our current understanding of the DDR.European Research Council (ERC-2014-CoG 647344
Igneous differentiation in porphyry dikes
[Resumen] Se aborda de manera teórica los principales procesos operativos de diferenciación
ígnea en secciones transversales de los conductos filonianos, aplicándolo a los diques de pórfido granítico s. 1. del Sistema Central Español. Para estos magmas se deduce un régimen de flujo marcadamente laminar en el conducto (:~ 30 mts. potencia). Estos caracteres impiden tanto la efectividad de franccionamiento cristalino «in situ:\), como grados importantes de asimilación o contaminación en ruta hacia la superficie. Los diques simples, de flujos isoviscosos, van a diferenciarse por fenómenos, principalmente, de flujo ígneo, en ocasiones combinado con la presencia de varios magmas fluyendo a la vez en el mismo pulso (conductos gruesos o flujos veloces). Con estos mecanismos se tenderá a generar evoluciones del tipo félsico a máfico, de borde a centro del dique de pórfido. Los diques compuestos se formarán cuando los magmas son suficientemente contrastados en sus caracteres físicos (viscosidad, p. ej.) y químicos, o cuando son varíos pulsos magmáticos a través del mismo conducto. En estos casos podría haber fen6menos de mezcla magmática si la diferencia de viscosidad es alta y uno de esos magmas es poco viscoso (magmas básicos). En estos casos podrían generarse zonas básicas en el borde, o no, de los diques. de pórfido. En resumen la diferenciación de flujo, la mezcla magmática y la asociación de varios líquidos fluyendo en el mismo conducto (de manera simultánea o por pulsos magmáticos algo separados en el tiempo), parecen ser los mecanismos de diferenciación ígnea más efectivos de estos magmas graníticos que fluyen en angostos conductos filonianos[Abstract] We deal in theoretical way wíth the main differentiation proccesses taking place in dike conducts, applied to the porphyry dikes of the Spanish Central System. For these magmas we infer a strong laminar flow regime (~30 m dike witdh). This, prevent an efficient «in situ:\) cristal fractionation as well as large extent of assimilation-contamination processes during the ascent of the magmas «en route» to more surface levels. Simple dikes, with isoviscous flow, could differentiate mainley by igneous flow. Sometimes this mechanism is combinated with the possibility of severa! Magmas flowing togheter on the same pulse (thick dikes or fast flows). With these mechanisms felsic to mafic evolutions are favoured inward the porphyry dike. Composite dikes are formed when magmas are contrasted enough in their chemical or physical features (p. ej. viscosity), or when different magmatic pulses occur in the same channel. In these conditions commingling of magmas could exist if the viscosity ratio is high apd one of the magmas is very fluid (basic one). These processes could generate basic margins in the porphyry dikes. In short, flow differentiation, magmatic mixing and flowing of associated magmas (simultaneously or by successive pulses), seem to be the more efficient differentiation mechanisms for granitic magmas flowing in narrow dikes
Desequilibrios nominales y reales del tipo de cambio en Colombia
La estimación de los desequilibrios nominales y reales del tipo de cambio(TC) en Colombia se construye a partir de dos componentes: el permanenteasociado con una tendencia estocástica (no estacionaria) y el transitoriovinculado con el ciclo (estacionario). La separación entre lo permanente ylo transitorio se realiza a partir de las relaciones de largo plazo entre el TCnominal (real) y sus determinantes fundamentales. El nivel de equilibrio dela TC nominal (real) se obtiene como el componente permanente, según lametodología de common trends", aplicada a la TC nominal y a susdeterminantes fundamentales, mientras que el componente transitorio secalcula por residuo y se asocia al desequilibrio. El ejercicio se lleva a cabopara diferentes frecuencias (anual y trimestral) y períodos de información y se usan variosmodelos de determinación del TC nominal y real."tasa de cambio real, equilibrio de la tasa de cambio real.
The high mass end of the stellar mass function: Dependence on stellar population models and agreement between fits to the light profile
We quantify the systematic effects on the stellar mass function which arise
from assumptions about the stellar population, as well as how one fits the
light profiles of the most luminous galaxies at z ~ 0.1. When comparing results
from the literature, we are careful to separate out these effects. Our analysis
shows that while systematics in the estimated comoving number density which
arise from different treatments of the stellar population remain of order < 0.5
dex, systematics in photometry are now about 0.1 dex, despite recent claims in
the literature. Compared to these more recent analyses, previous work based on
Sloan Digital Sky Survey (SDSS) pipeline photometry leads to underestimates of
rho_*(> M_*) by factors of 3-10 in the mass range 10^11 - 10^11.6 M_Sun, but up
to a factor of 100 at higher stellar masses. This impacts studies which match
massive galaxies to dark matter halos. Although systematics which arise from
different treatments of the stellar population remain of order < 0.5 dex, our
finding that systematics in photometry now amount to only about 0.1 dex in the
stellar mass density is a significant improvement with respect to a decade ago.
Our results highlight the importance of using the same stellar population and
photometric models whenever low and high redshift samples are compared.Comment: 18 pages, 17 figures, accepted for publication in MNRAS. The PyMorph
luminosities and stellar masses are available at
https://www.physics.upenn.edu/~ameert/SDSS_PhotDec
Wave energy in Europe: Views on experiences and progress to date
publisher: Elsevier articletitle: Wave energy in Europe: Views on experiences and progress to date journaltitle: International Journal of Marine Energy articlelink: http://dx.doi.org/10.1016/j.ijome.2015.09.001 content_type: article copyright: © 2015 Elsevier Ltd. All rights reserved
A robust morphological classification of high-redshift galaxies using support vector machines on seeing limited images. II. Quantifying morphological k-correction in the COSMOS field at 1<z<2: Ks band vs. I band
We quantify the effects of \emph{morphological k-correction} at by
comparing morphologies measured in the K and I-bands in the COSMOS area.
Ks-band data have indeed the advantage of probing old stellar populations for
, enabling a determination of galaxy morphological types unaffected by
recent star formation. In paper I we presented a new non-parametric method to
quantify morphologies of galaxies on seeing limited images based on support
vector machines. Here we use this method to classify
selected galaxies in the COSMOS area observed with WIRCam at CFHT. The obtained
classification is used to investigate the redshift distributions and number
counts per morphological type up to and to compare to the results
obtained with HST/ACS in the I-band on the same objects from other works. We
associate to every galaxy with and a probability between 0 and
1 of being late-type or early-type. The classification is found to be reliable
up to . The mean probability is . It decreases with redshift
and with size, especially for the early-type population but remains above
. The classification is globally in good agreement with the one
obtained using HST/ACS for . Above , the I-band classification
tends to find less early-type galaxies than the Ks-band one by a factor
1.5 which might be a consequence of morphological k-correction effects.
We argue therefore that studies based on I-band HST/ACS classifications at
could be underestimating the elliptical population. [abridged]Comment: accepted for publication in A&A, updated with referee comments, 12
pages, 10 figure
FEM based mathematical modelling of thrust force during drilling of Al7075-T6
Like most machining processes, drilling is affected by many parameters such as the tool diameter, the cutting speed and feed. The current research investigates the possibility of developing a finite element modelling based prediction model for the generated thrust force during drilling of Al7075-T6 with solid carbide tools. A total of 27 drilling experiments were carried out in order to examine the interaction between three key parameters and their effect on thrust force. In addition, simulations of the experiments were realized with the use of DEFORM3D((TM))software in order to obtain the necessary numerical data. Finally, a comparison was made between the experimental and the numerical results to verify that reliable modelling is feasible. The mathematical model was acquired with the use of response surface methodology and the verification of the adequacy of the model was performed through an analysis of variance. The majority of the simulations yielded results in agreement with the experimental results at around 95% and the derived model offered an accuracy of 5.9%
CAD-Based Automated Design of FEA-Ready Cutting Tools
The resources of modern Finite Element Analysis (FEA) software provide engineers with powerful mechanisms that can be used to investigate numerous machining processes with satisfying results. Nevertheless, the success of a simulation, especially in three dimensions, relies heavily on the accuracy of the cutting tool models that are implemented in the analyses. With this in mind, the present paper presents an application developed via Computer-Aided Design (CAD) programming that enables the automated design of accurate cutting tool models that can be used in 3D turning simulations. The presented application was developed with the aid of the programming resources of a commercially available CAD system. Moreover, the parametric design methodology was employed in order to design the tools according to the appropriate standards. Concluding, a sample tool model was tested by performing a number of machining simulations based on typical cutting parameters. The yielded results were then compared to experimental values of the generated machining force components for validation. The findings of the study prove the functionality of the tool models since a high level of agreement occurred between the acquired numerical results and the experimental ones
Influence of the Nose Radius on the Machining Forces Induced during AISI-4140 Hard Turning: A CAD-Based and 3D FEM Approach
The present study investigated the performance of three ceramic inserts in terms of the micro-geometry (nose radius and cutting edge type) with the aid of a 3D finite element (FE) model. A set of nine simulation runs was performed according to three levels of cutting speed and feed rate with respect to a predefined depth of cut and tool nose radius. The yielded results were compared to the experimental values that were acquired at identical cutting conditions as the simulated ones for verification purposes. Consequently, two more sets of nine simulations each were carried out so that a total of 27 turning simulation runs would adduce. The two extra sets corresponded to the same cutting conditions, but to different cutting tools (with varied nose radius). Moreover, a prediction model was established based on statistical methodologies such as the response surface methodology (RSM) and the analysis of variance (ANOVA), further investigating the relationship between the critical parameters (cutting speed, feed rate, and nose radius) and their influence on the generated turning force components. The comparison between the experimental values of the cutting force components and the simulated ones demonstrated an increased correlation that exceeded 89%. Similarly, the values derived from the statistical model were in compliance with the equivalent FE model values due to the verified adequacy
- …