On Ex Situ NMR: Developing portable low-cost and/or single sided NMR/MRI

Nuclear magnetic resonance spectroscopy (NMR) is of unsurpassed versatility in its ability to non-destructively probe for chemical identity. Portable, low-cost NMR sensors would enable on site identification of potentially hazardous substances, such as signatures from production of nuclear, chemical, and biological weapon agents, narcotics, explosives, toxins, and poisons. There exist however problems that need to be considered in the case of such sensors: (a) small-scale magnets produce inhomogeneous magnetic fields and therefore undesired Larmor frequency distributions that conceal much of the useful spectral information, and (b) sensitivity in most experiments decreases due to the inherently low and strongly inhomogeneous fields associated with portable instruments. Our approach is to: (a) try to improve the field of low cost magnets either with hardware (e.g. magnet design and construction of ''shim coils'') or via special pulse sequences, where the field is ''effectively shimmed'' to appear homogeneous to the sample, and (b) to use microcoils to improve sensitivity and to allow focusing in smaller regions and therefore smaller static field variations. We have been working in setting up a table top, 2-Tesla permanent Halbach magnet system for tabletop NMR. The Spectrometer console is a Tecmag Apollo, controlled by a dell notebook. Currently an external linear chemagnetics rf amplifier is being used, though the power requirements for our system are quite low (a few Watts). The Magnetic Resonance lab in LLNL, has developed several types and sizes of microcoils, which have been proven to perform well for NMR experiments. We have evaluated an rf, 360 {micro}m O.D., microcoil probe that was built previously. We have finished mapping the magnetic field of the magnet. In the optimal position (in terms of field quality), the field inhomogeneity was at 17ppm. Preliminary fluorine spectra with a resolved two peak separation have now been obtained. For the field, as mapped, we have initial designs of first degree shimming, or gradient coils (linear correction to the field). We have calculated ''shim pulses'' to effectively shim the mapped field, for ideal gradient coils. These calculations will be repeated after the coils will be built and evaluated

Gad65 is recognized by t-cells, but not by antibodies from nod-mice

Since the 64kDa-protein glutamic acid decarboxylase (GAD) is one of the major autoantigens in T-cell mediated Type 1 diabetes, its relevance as a T-cell antigen needs to be clarified. After isolation of splenic T-cells from non-obese diabetic (NOD) mice, a useful model for human Type 1 diabetes, we found that these T-cells proliferate spontaneously when incubated with human GAD65, but only marginally after incubation with GAD67, both recombinated in the baculovirus system. No effect was observed with non-diabetic NOD mice or with T-cells from H-2 identical NON-NOD-H-2g7 control mice. It has been published previously that NOD mice develop autoantibodies against a 64kDa protein detected with mouse beta cells. In immunoprecipitation experiments with sera from the same NOD mice and 33S-methionine-labelled GAD, no autoantibody binding could be detected. We conclude firstly that GAD65 is an important T-cell antigen which is relevant early in the development of Type 1 diabetes and secondly that there is an antigenic epitope in the human GAD65 molecule recognized by NOD T-cells, but not by NOD autoantibodies precipitating conformational epitopes. Our results therefore provide further evidence that GAD65 is a T-cell antigen in NOD mice, being possibly also involved in very early processes leading to the development of human Type 1 diabetes

Щодо утворення сімейств атомарних радіальних базисних функцій

Наведено схему побудови сімейств атомарних радіальних базисних функцій, які є нескінченно диференційовними фінітними розв'язками функціонально-диференціальних рівнянь, породжених операторами Лапласа та Гельмгольца.The scheme of building a family of atomic radial basis functions which are infinitely differentiable finite solutions of the functional-differential equations containing the Laplace and Helmholtz operators is introduced

Magnetic Resonance Based Diagnostics for Polymer Production and Surveillance

In an effort to develop a magnetic resonance based diagnostic tool to be used for polymer production and surveillance, we have investigated the use of magnetic resonance imaging (MRI) and unilateral relaxometry. MRI provides a spatial map of the polymer, which can be correlated to the structure heterogeneity. Though highly detailed information can be obtained with MRI, the high equipment cost and expertise required to operate the system makes it a poor choice for a production setting. Unilateral relaxometry via the NMR MOUSE provides rapid, inexpensive polymer screening, useful in the development in new polymer parts or to identify potentially defective components. The NMR ProFiler (originally called the NMR MOUSE) was procured by Kansas City originally for production support of the W80 LEP with future applications as a surveillance diagnostic. A robotic autosampler has been designed allowing the detection of several components without the need for any human interaction. A summary of the qualification experiments and results to date from the ProFiler and the robotic unit will be presented

Extraction of electromagnetic neutron form factors through inclusive and exclusive polarized electron scattering on polarized 3He target

Inclusive 3He(e,e') and exclusive 3He(e,e'n) processes with polarized electrons and 3He have been theoretically analyzed and values for the magnetic and electric neutron form factors have been extracted. In both cases the form factor values agree well with the ones extracted from processes on the deuteron. Our results are based on Faddeev solutions, modern NN forces and partially on the incorporation of mesonic exchange currents.Comment: 28 pages, 29 Postscript figure

Characterizing Hydrogen Storage Media: Understanding the Interior Pore Structure of a Cu3BTC2 Metal-Organic Framework Infiltrated with NaAlH4

Preliminary results support the nano-confinement of sodium alanate within the pores of a Cu{sub 3}BTC{sub 2} MOF substrate. Increased {sup 1}H and {sup 27}Al NMR T{sub 1} relaxation rates indicate a close proximity of infiltrated sodium alante to the paramagnetic Cu{sup 2+} ions on the BTC paddlewheel units. This is in support of the theory that an interaction due to the electronegative framework with the sodium alanate facilitates thermodynamically-favorable hydrogen adsorption and desorption. Further studies can elucidate the local electronic environment of the sodium ions, further supporting a charge-transfer mechanism as the driving force for thermodynamically-favorable hydrogen adsorption and desorption

Diagnosis of Kawasaki disease using a minimal whole blood gene expression signature

Importance There is no diagnostic test for Kawasaki disease (KD). Diagnosis is based on clinical features shared with other febrile conditions, frequently resulting in delayed or missed treatment and an increased risk of coronary artery aneurysms. Objective To identify a whole blood gene expression signature that distinguishes children with KD in the first week of illness from other febrile conditions. Design Case-control discovery study groups comprising training, test, and validation groups of children with KD or comparator febrile illness. Setting Hospitals in the UK, Spain, Netherlands and USA. Participants The training and test discovery group comprised 404 children with infectious and inflammatory conditions (78 KD, 84 other inflammatory diseases, 242 bacterial or viral infections) and 55 healthy controls. The independent validation group included 130 febrile children and 102 KD patients, including 72 in the first 7 days of illness. Exposures Whole blood gene expression was evaluated using microarrays, and minimal transcript sets distinguishing KD were identified using a novel variable selection method (Parallel Deterministic Model Search). Main outcomes and measures The ability of transcript signatures - implemented as Disease Risk Scores - to discriminate KD cases from controls, was assessed by Area Under the Curve (AUC), sensitivity, and specificity at the optimal cut-point according to Youden’s index. Results A 13-transcript signature identified in the discovery training set distinguished KD from other infectious and inflammatory conditions in the discovery test set with AUC, sensitivity, and specificity (95% confidence intervals (CI)) of 96.2% (92.5-99.9), 81.7% (60.0-94.8), and 92.1% (84.0-97.0), respectively. In the validation set, the signature distinguished KD from febrile controls with AUC, sensitivity, and specificity (95% CI) of 94.6% (91.3-98.0), 85.9% (76.8-92.6), and 89.1% (83.0-93.7) respectively. The signature was applied to clinically defined categories of Definite, Highly Probable and Possible KD resulting in AUCs of 98.1%, 96.3% and 70.0% respectively, mirroring clinical certainty. Conclusions and relevance A 13-transcript blood gene expression signature distinguished KD from other febrile conditions. Diagnostic accuracy increased with certainty of clinical diagnosis. A test incorporating the 13-transcript Disease Risk Score may enable earlier diagnosis and treatment of KD, and reduce inappropriate treatment in those with other diagnoses

Treatment of Multisystem Inflammatory Syndrome in Children.

BACKGROUND: Evidence is urgently needed to support treatment decisions for children with multisystem inflammatory syndrome (MIS-C) associated with severe acute respiratory syndrome coronavirus 2. METHODS: We performed an international observational cohort study of clinical and outcome data regarding suspected MIS-C that had been uploaded by physicians onto a Web-based database. We used inverse-probability weighting and generalized linear models to evaluate intravenous immune globulin (IVIG) as a reference, as compared with IVIG plus glucocorticoids and glucocorticoids alone. There were two primary outcomes: the first was a composite of inotropic support or mechanical ventilation by day 2 or later or death; the second was a reduction in disease severity on an ordinal scale by day 2. Secondary outcomes included treatment escalation and the time until a reduction in organ failure and inflammation. RESULTS: Data were available regarding the course of treatment for 614 children from 32 countries from June 2020 through February 2021; 490 met the World Health Organization criteria for MIS-C. Of the 614 children with suspected MIS-C, 246 received primary treatment with IVIG alone, 208 with IVIG plus glucocorticoids, and 99 with glucocorticoids alone; 22 children received other treatment combinations, including biologic agents, and 39 received no immunomodulatory therapy. Receipt of inotropic or ventilatory support or death occurred in 56 patients who received IVIG plus glucocorticoids (adjusted odds ratio for the comparison with IVIG alone, 0.77; 95% confidence interval [CI], 0.33 to 1.82) and in 17 patients who received glucocorticoids alone (adjusted odds ratio, 0.54; 95% CI, 0.22 to 1.33). The adjusted odds ratios for a reduction in disease severity were similar in the two groups, as compared with IVIG alone (0.90 for IVIG plus glucocorticoids and 0.93 for glucocorticoids alone). The time until a reduction in disease severity was similar in the three groups. CONCLUSIONS: We found no evidence that recovery from MIS-C differed after primary treatment with IVIG alone, IVIG plus glucocorticoids, or glucocorticoids alone, although significant differences may emerge as more data accrue. (Funded by the European Union's Horizon 2020 Program and others; BATS ISRCTN number, ISRCTN69546370.)

Portable, Low-cost NMR with Laser-Lathe Lithography Produced

Nuclear Magnetic Resonance (NMR) is unsurpassed in its ability to non-destructively probe chemical identity. Portable, low-cost NMR sensors would enable on-site identification of potentially hazardous substances, as well as the study of samples in a variety of industrial applications. Recent developments in RF microcoil construction (i.e. coils much smaller than the standard 5 mm NMR RF coils), have dramatically increased NMR sensitivity and decreased the limits-of-detection (LOD). We are using advances in laser pantographic microfabrication techniques, unique to LLNL, to produce RF microcoils for field deployable, high sensitivity NMR-based detectors. This same fabrication technique can be used to produce imaging coils for MRI as well as for standard hardware shimming or 'ex-situ' shimming of field inhomogeneities typically associated with inexpensive magnets. This paper describes a portable NMR system based on a laser-fabricated microcoil and homebuilt probe design. For testing this probe, we used a hand-held 2 kg Halbach magnet that can fit into the palm of a hand, and an RF probe with laser-fabricated microcoils. The focus of the paper is on the evaluation of the microcoils, RF probe, and first generation gradient coils. The setup of this system, initial results, sensitivity measurements, and future plans are discussed. The results, even though preliminary, are promising and provide the foundation for developing a portable, inexpensive NMR system for chemical analysis. Such a system will be ideal for chemical identification of trace substances on site