System and Method for Location of Aircraft

A system and method are provided that includes an aircraft secondary radar transponder activity detector that monitors an aircraft\u27s transponder transmissions and activates an emer­gency locator transmitter to begin transmitting should the aircraft transponder transmissions cease to help locate an aircraft that may have become undetectable by conventional aircraft surveillance and tracking systems

Hot Wire Anemoteter

A hot wire anemometer circuit has a calibrate subcircuit and an operate subcircuit which are selectively invoked via a user-activate mode switch. The calibrate subcircuit includes a detector configured to compare an amplified sensor voltage with an amplified drive voltage and output an indicator signal when the two voltages match. The drive voltage is derived from a user-adjusted drive resistance of a bridge subcircuit. The operate circuit includes a feedback loop which provides a signal to a bride node of a bridge circuit. After a sensor is connected to the anemometer circuit, the drive resistance is adjusted until the indicator signal is produced, signifying that the circuit is tuned and impedances are matched to prevent oscillations. A slewing network protects the sensor by shorting the drive resistance upon switching the anemometer circuit to the calibrate mode from the operate mode, and gradually restoring the drive resis­tance when switching back

Hot Wire Anemometer

A hot wire anemometer circuit has a calibrate subcircuit and an operate subcircuit which are selectively invoked via a user-activate mode switch. The calibrate subcircuit includes a detector configured to compare an amplified sensor voltage with an amplified drive voltage and output an indicator signal when the two voltages match. The drive voltage is derived from a user-adjusted drive resistance of a bridge subcircuit. The operate circuit includes a feedback loop which provides a signal to a bride node of a bridge circuit. After a sensor is connected to the anemometer circuit, the drive resistance is adjusted until the indicator signal is produced, signifying that the circuit is tuned and impedances are matched to prevent oscillations. A slewing network protects the sensor by short­ing the drive resistance upon switching the anemometer cir­cuit to the calibrate mode from the operate mode, and gradu­ally restoring the drive resistance when switching back

Bistatic Radar System Using Satellite-Based Transmitters with Ionospheric Compensation

A system for the passive location of non-cooperating vehicles using satellite-based transmitters with ionospheric compen­sation. The system is a light-weight, low-cost, portable, and field-deployable station to supplement deficiencies in the National Airspace System (NAS) and homeland security sur­veillance networks. The system accommodates observation modes having long integration times that potentially are greater than one second. The system utilizes satellite-based transmitters as illuminators. The passive system measures two radio waves ( e.g., a direct path and an illumination plus reflection path), and applies time-difference techniques that can compensate for the ionosphere since the ionospheric delay is applied to both signals. This also has the advantage of compensating for other uncertainties such as exist in the position of the satellite

Multi-Aperture CMOS Sun Sensor for Microsatellite Attitude Determination

This paper describes the high precision digital sun sensor under development at the University of Naples. The sensor determines the sun line orientation in the sensor frame from the measurement of the sun position on the focal plane. It exploits CMOS technology and an original optical head design with multiple apertures. This allows simultaneous multiple acquisitions of the sun as spots on the focal plane. The sensor can be operated either with a fixed or a variable number of sun spots, depending on the required field of view and sun-line measurement precision. Multiple acquisitions are averaged by using techniques which minimize the computational load to extract the sun line orientation with high precision. Accuracy and computational efficiency are also improved thanks to an original design of the calibration function relying on neural networks. Extensive test campaigns are carried out using a laboratory test facility reproducing sun spectrum, apparent size and distance, and variable illumination directions. Test results validate the sensor concept, confirming the precision improvement achievable with multiple apertures, and sensor operation with a variable number of sun spots. Specifically, the sensor provides accuracy and precision in the order of 1 arcmin and 1 arcsec, respectively

Advances in materials design for all-solid-state batteries: From bulk to thin films

All-solid-state batteries (SSBs) are one of the most fascinating next-generation energy storage systems that can provide improved energy density and safety for a wide range of applications from portable electronics to electric vehicles. The development of SSBs was accelerated by the discovery of new materials and the design of nanostructures. In particular, advances in the growth of thin-film battery materials facilitated the development of all solid-state thin-filmbatteries (SSTFBs)-expanding their applications to microelectronics such as flexible devices and implantable medical devices. However, critical challenges still remain, such as low ionic conductivity of solid electrolytes, interfacial instability and difficulty in controlling thin-film growth. In this review, we discuss the evolution of electrode and electrolyte materials for lithium-based batteries and their adoption in SSBs and SSTFBs. We highlight novel design strategies of bulk and thin-film materials to solve the issues in lithium-based batteries. We also focus on the important advances in thin-film electrodes, electrolytes and interfacial layers with the aim of providing insight into the future design of batteries. Furthermore, various thin-film fabrication techniques are also covered in this review

Advances in Materials Design for All-Solid-state Batteries: From Bulk to Thin Films

All-solid-state batteries (SSBs) are one of the most fascinating next-generation energy storage systems that can provide improved energy density and safety for a wide range of applications from portable electronics to electric vehicles. The development of SSBs was accelerated by the discovery of new materials and the design of nanostructures. In particular, advances in the growth of thin-film battery materials facilitated the development of all solid-state thin-film batteries (SSTFBs)—expanding their applications to microelectronics such as flexible devices and implantable medical devices. However, critical challenges still remain, such as low ionic conductivity of solid electrolytes, interfacial instability and difficulty in controlling thin-film growth. In this review, we discuss the evolution of electrode and electrolyte materials for lithium-based batteries and their adoption in SSBs and SSTFBs. We highlight novel design strategies of bulk and thin-film materials to solve the issues in lithium-based batteries. We also focus on the important advances in thin-film electrodes, electrolytes and interfacial layers with the aim of providing insight into the future design of batteries. Furthermore, various thin-film fabrication techniques are also covered in this review

New Quartz Oscillator Switching Method for Nano-Henry Range Inductance Measurements

This article introduces a new method for nano-Henry inductance measurements at the frequency of 4.999 MHz with a single quartz crystal oscillating in the switching oscillating circuit. The real novelty of this method, however, lies in a considerable reduction of the temperature influence of AT-cut crystal frequency change in the temperature range between 0 °C and 50 °C through a switching method which compensates for the crystal’s natural temperature characteristics. This allows for the compensation of any influences on the crystal such as the compensation of the non-linear temperature characteristics and the ageing of both the crystal and other oscillating circuit elements, as well as the reduction of the output frequency measurement errors with the help of an additional reference frequency. The experimental results show that the switching method greatly improves the measurement of small inductance changes in the range between μH and nH, allowing as a result high-precision measurements (∼0.35 fH) in this range

Digital image correlation vibrometry with low speed equipment

A low-cost method is presented which enables digital image correlation (DIC) with conventional cameras (i.e. not high-speed) to be used for determination of vibration deflected shapes via the use of a stroboscopic lamp and some simple ancillary circuits. For each natural frequency of the structure under consideration, a sequence of images is captured asynchronously with the vibrations using the DIC system and the resulting displacement fields are correlated with the excitation signal driving the vibration using a least-squares approach. Three approaches for performing this correlation are outlined, one of which is developed into the algorithm used for processing the present results to obtain the amplitude and phase of the vibration at each point on the specimen, allowing the deflected shape to be reconstructed. This process is illustrated using the example of a vibrating aluminium plate. The resulting shapes and frequencies agree well with finite element modal analyses of the plate