126 research outputs found

    The interfacial structure of polymeric surfactant stabilised air-in-water foams

    Get PDF
    Small-angle neutron scattering was used to probe the interfacial structure of nitrogen-in-water foams created using a series of tri-block polymeric surfactants of the poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (EOx–POy–EOx) range, from which the nature of the polymeric interface could be characterised. The data follow a pronounced Q−4 decay, along with a number of inflexions and weak but well-defined peaks. These characteristics were well-described by a model embodying paracrystalline stacks of adsorbed polymer layers, whose formation is induced by the presence of the air–water interface, adsorbed at the flat air–water (film lamellae) interface. A minimum of approximately five paracrystalline polymer layers of thickness of the order of 85–160 Å, interspersed with somewhat thicker (400 Å) films of continuous aqueous phase were found to best fit the data. The thickness of the layer (L) was shown to follow a relationship predicted by anchor block dominated polymer adsorption theories from non-selective solvents, L EO1PO1/3. The insight gained from these studies should permit a more rational design of polymeric stabilisers for hydrophilic polyurethane foams

    Transcript and protein profiling identify candidate gene sets of potential adaptive significance in New Zealand Pachycladon

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Transcript profiling of closely related species provides a means for identifying genes potentially important in species diversification. However, the predictive value of transcript profiling for inferring downstream-physiological processes has been unclear. In the present study we use shotgun proteomics to validate inferences from microarray studies regarding physiological differences in three <it>Pachycladon </it>species. We compare transcript and protein profiling and evaluate their predictive value for inferring glucosinolate chemotypes characteristic of these species.</p> <p>Results</p> <p>Evidence from heterologous microarrays and shotgun proteomics revealed differential expression of genes involved in glucosinolate hydrolysis (myrosinase-associated proteins) and biosynthesis (methylthioalkylmalate isomerase and dehydrogenase), the interconversion of carbon dioxide and bicarbonate (carbonic anhydrases), water use efficiency (ascorbate peroxidase, 2 cys peroxiredoxin, 20 kDa chloroplastic chaperonin, mitochondrial succinyl CoA ligase) and others (glutathione-S-transferase, serine racemase, vegetative storage proteins, genes related to translation and photosynthesis). Differences in glucosinolate hydrolysis products were directly confirmed. Overall, prediction of protein abundances from transcript profiles was stronger than prediction of transcript abundance from protein profiles. Protein profiles also proved to be more accurate predictors of glucosinolate profiles than transcript profiles. The similarity of species profiles for both transcripts and proteins reflected previously inferred phylogenetic relationships while glucosinolate chemotypes did not.</p> <p>Conclusions</p> <p>We have used transcript and protein profiling to predict physiological processes that evolved differently during diversification of three <it>Pachycladon </it>species. This approach has also identified candidate genes potentially important in adaptation, which are now the focus of ongoing study. Our results indicate that protein profiling provides a valuable tool for validating transcript profiles in studies of adaptive divergence.</p

    Spatial and temporal scales of coral reef fish ecological research and management: a systematic map protocol

    Get PDF
    Background Coral reefs are rapidly changing in response to local and global stressors. Research to better understand and inform the management of these stressors is burgeoning. However, in situ studies of coral reef ecology are constrained by complex logistics and limited resources. Many reef studies are also hampered by the scale-dependent nature of ecological patterns, and inferences made on causal relationships within coral reef systems are limited by the scales of observation. This is because most socio-ecological studies are conducted at scales relevant to the phenomenon of interest. However, management often occurs across a significantly broader, often geopolitical, range of scales. While there is a critical need for incisive coral reef management actions at relevant spatial and temporal scales, it remains unclear to what extent the scales of empirical study overlap with the scales at which management inferences and recommendations are made. This systematic map protocol will evaluate this potential scale mismatch with the goal of raising awareness about the significance of effectively addressing and reporting the scales at which researchers collect data and make assumptions. Methods We will use the Collaboration for Environmental Evidence (CEE) systematic mapping guidelines to identify relevant studies using a framework-based synthesis to summarise the spatial and temporal scales of coral reef fish ecology research and the scales at which management inferences or recommendations are made. Using tested predefined terms, we will search for relevant published academic and grey literature, including bibliographic databases, web-based search engines, and organisational websites. Inclusion criteria for the evidence map are empirical studies that focus on coral reef fish ecological organisation and processes, those informing management interventions and policy decisions, and management documents that cite coral reef research for management decision-making. Study results will be displayed graphically using data matrices and heat maps. This is the first attempt to systematically assess and compare the scales of socio-ecological research conducted on coral reef systems with their management

    Segregation versus interdigitation in highly dynamic polymer/surfactant layers

    Get PDF
    Many polymer/surfactant formulations involve a trapped kinetic state that provides some beneficial character to the formulation. However, the vast majority of studies on formulations focus on equilibrium states. Here, nanoscale structures present at dynamic interfaces in the form of air-in-water foams are explored, stabilised by mixtures of commonly used non-ionic, surface active block copolymers (Pluronic®) and small molecule ionic surfactants (sodium dodecylsulfate, SDS, and dodecyltrimethylammonium bromide, C12TAB). Transient foams formed from binary mixtures of these surfactants shows considerable changes in stability which correlate with the strength of the solution interaction which delineate the interfacial structures. Weak solution interactions reflective of distinct coexisting micellar structures in solution lead to segregated layers at the foam interface, whereas strong solution interactions lead to mixed structures both in bulk solution, forming interdigitated layers at the interface

    Assembly of small molecule surfactants at highly dynamic air-water interfaces

    Get PDF
    Small-angle neutron scattering has been used to probe the interfacial structure of foams stabilised by small molecule surfactants at concentrations well below their critical micelle concentration. The data for wet foams showed a pronounced Q−4 dependence at low Q and noticeable inflexions over the mid Q range. These features were found to be dependent on the surfactant structure (mainly the alkyl chain length) with various inflexions across the measured Q range as a function of the chain length but independent of factors such as concentration and foam age/height. By contrast, foam stability (for C < CMC) was significantly different at this experimental range. Drained foams showed different yet equally characteristic features, including additional peaks attributed to the formation of classical micellar structures. Together, these features suggest the dynamic air–water interface is not as simple as often depicted, indeed the data have been successfully described by a model consisting paracrystalline stacks (multilayer) of adsorbed surfactant layers; a structure that we believe is induced by the dynamic nature of the air–water interface in a foam

    Thermal Runaway of Li-Ion Cells: How Internal Dynamics, Mass Ejection, and Heat Vary with Cell Geometry and Abuse Type

    Get PDF
    Thermal runaway of lithium-ion batteries can involve various types of failure mechanisms each with their own unique characteristics. Using fractional thermal runaway calorimetry and high-speed radiography, the response of three different geometries of cylindrical cell (18650, 21700, and D-cell) to different abuse mechanisms (thermal, internal short circuiting, and nail penetration) are quantified and statistically examined. Correlations between the geometry of cells and their thermal behavior are identified, such as increasing heat output per amp-hour (kJ Ah-1) of cells with increasing cell diameter during nail penetration. High-speed radiography reveals that the rate of thermal runaway propagation within cells is generally highest for nail penetration where there is a relative increase in rate of propagation with increasing diameter, compared to thermal or internal short-circuiting abuse. For a given cell model tested under the same conditions, a distribution of heat output is observed with a trend of increasing heat output with increased mass ejection. Finally, internal temperature measurements using thermocouples embedded in the penetrating nail are shown to be unreliable thus demonstrating the need for care when using thermocouples where the temperature is rapidly changing. All data used in this manuscript are open access through the NREL and NASA Battery Failure Databank

    Construction and physiochemical characterisation of a multi-composite, potential oral vaccine delivery system (VDS)

    Get PDF
    An increasing human population requires a secure food supply and a cost effective, oral vaccine delivery system for livestock would help facilitate this end. Recombinant antigen adsorbed onto silica beads and coated with myristic acid, was released (∼15% (w/v)) over 24 h at pH 8.8. At pH 2, the myristic acid acted as an enteric coating, protecting the antigen from a variety of proteases. The antigen adsorbed onto silica particles, coated in myristic acid had a conserved secondary structure (measured by circular dichroism (CD) spectroscopy) following its pH-triggered release. Small angle neutron scattering (SANS) was used to measure the thickness of the adsorbed antigen, finding that its adsorbed conformation was slightly greater than its solution radius of gyration, i.e. 120–160 Å. The addition of myristic acid led to a further increase in particle size, with scattering data consistent with an acid thickness slightly greater than a monolayer of fully extended alkyl chains and a degree of hydration of around 50%. Whilst adsorbed onto the silica and coated in myristic acid, the protein was stable over 14 days at 42 °C, indicating a reduced need for cold chain storage. These data indicate that further investigation is warranted into the development of this technology

    Probing competitive interactions in quaternary formulations

    Get PDF
    Hypothesis The interaction of amphiphilic block copolymers of the poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) group with small molecule surfactants may be “tuned” by the presence of selected alcohols, with strong interactions leading to substantial changes in (mixed) micelle morphology, whilst weaker interactions lead to coexisting micelle types. Experiments The nature and the strength of the interactions between Pluronic P123 (EO20PO70EO20) and small molecule surfactants (anionic sodium dodecylsulfate, SDS, C12SO4Na), (cationic dodecyltrimethylammonium bromide, C12TAB) and (non-ionic polyoxyethylene(23)lauryl ether, Brij 35, C12EO23OH) is expected to depend on the partitioning of the short, medium and long chain alcohols (ethanol, hexanol and decanol respectively) and was probed using tensiometry, pulsed-gradient spin-echo nuclear magnetic resonance (PGSE-NMR) and small-angle neutron scattering (SANS). Findings The SANS data for aqueous P123 solutions with added alcohols were well described by a charged spherical core/shell model for the micelle morphology. The addition of the surfactants led to significantly smaller, oblate elliptical mixed micelles in the absence of alcohols. Addition of ethanol to these systems led to a decrease in the micelle size, whereas larger micelles were observed upon addition of the longer chain alcohols. NMR studies provided complementary estimates of the micelle composition, and the partitioning of the various components into the micelle

    The diagnosis and management of systemic autoimmune rheumatic disease-related interstitial lung disease: British Society for Rheumatology guideline scope

    Get PDF
    Interstitial lung disease (ILD) is a significant complication of many systemic autoimmune rheumatic diseases (SARDs), although the clinical presentation, severity and outlook may vary widely between individuals. Despite the prevalence, there are no specific guidelines addressing the issue of screening, diagnosis and management of ILD across this diverse group. Guidelines from the ACR and EULAR are expected, but there is a need for UK-specific guidelines that consider the framework of the UK National Health Service, local licensing and funding strategies. This article outlines the intended scope for the British Society for Rheumatology guideline on the diagnosis and management of SARD-ILD developed by the guideline working group. It specifically identifies the SARDs for consideration, alongside the overarching principles for which systematic review will be conducted. Expert consensus will be produced based on the most up-to-date available evidence for inclusion within the final guideline. Key issues to be addressed include recommendations for screening of ILD, identifying the methodology and frequency of monitoring and pharmacological and non-pharmacological management. The guideline will be developed according to methods and processes outlined in Creating Clinical Guidelines: British Society for Rheumatology Protocol version 5.1.</p
    corecore