The Importance of Time Congruity in the Organisation.

In 1991 Kaufman, Lane, and Lindquist proposed that time congruity in terms of an individual's time preferences and the time use methods of an organisation would lead to satisfactory performance and enhancement of quality of work and general life. The research reported here presents a study which uses commensurate person and job measures of time personality in an organisational setting to assess the effects of time congruity on one aspect of work life, job-related affective well-being. Results show that time personality and time congruity were found to have direct effects on well-being and the influence of time congruity was found to be mediated through time personality, thus contributing to the person–job (P–J) fit literature which suggests that direct effects are often more important than indirect effects. The study also provides some practical examples of ways to address some of the previously cited methodological issues in P–J fit research

Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers

[EN] Novel bio-based thermoset formulations were prepared by using epoxidized soybean oil (ESBO), nadic methyl anhydride as a hardener and with different types of proteins as fillers. In the first part of the study, the effect of the protein-type (wheat gluten, soy protein, casein and ovalbumin) on cured ESBO materials was investigated. Thermal and mechanical properties were characterized by flexural tests, Shore D hardness, Charpy impact tests, Vicat softening temperature and heat deflection temperature. In addition, a study of the morphology of fractured surfaces by scanning electron microscopy was carried out. In general, the addition of protein-based fillers improved the mechanical and thermal properties. It was found that the highest increase of thermal and mechanical properties was achieved by ovalbumin. In the second part of the work, the effect of the total amount of ovalbumin filler was studied. Bio-based thermoset materials from ESBO and 15 wt % ovalbumin improved flexural modulus more than 150 % when compared to the unfilled material. Similar evolution was observed for other mechanical properties. Moreover, the brittleness of this composition was the minimum from the studied systems. A direct relationship between energy absorption capacity and morphologies of the failure surface was evidenced by SEM.This work is a part of the project IPT-310000-2010-037,"ECOTEXCOMP: Research and development of textile structures useful as reinforcement of composite materials with marked ecological character" funded by the "Ministerio de Ciencia e Innovacion", with an aid of 189540.20 euros, within the "Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica 2008-2011" and funded by the European Union through FEDER funds, Technology Fund 2007-2013, "Operational Programme on R+D+I for and on behalf of the companies". Also, Generalitat Valenciana ACOMP/2012/087 is acknowledged for financial support.Fombuena Borrás, V.; Sánchez Nacher, L.; Samper Madrigal, MD.; Juárez Varón, D.; Balart Gimeno, RA. (2013). Study of the properties of thermoset materials derived from epoxidized soybean oil and protein fillers. Journal of the American Oil Chemists' Society. 90(3):449-457. https://doi.org/10.1007/s11746-012-2171-2S449457903Alonso MV, Oliet M, Garcia J, Rodriguez F, Echeverria J (2006) Gelation and isoconversional kinetic analysis of lignin-phenol-formaldehyde resol resins cure. Chem Eng J 122:159–166Altuna FI, Esposito LH, Ruseckaite RA, Stefani PM (2011) Thermal and mechanical properties of anhydride-cured epoxy resins with different contents of bio-based epoxidized soybean oil. J Appl Polym Sci 120:789–798Boquillon N, Fringant C (2000) Polymer networks derived from curing of epoxidised linseed oil: influence of different catalysts and anhydride hardeners. Polymer 41:8603–8613Boquillon N, Elbez G, Schonfeld U (2004) Properties of wheat straw particleboards bonded with different types of resin. J Wood Sci 50:230–235Chakrapani S, Crivello JV (1998) Synthesis and photoinitiated cationic polymerization of epoxidized castor oil and its derivatives. J Macromol Sci-Pure Appl Chem A35:1–20Chen F, Zhang JW (2009) A new approach for morphology control of poly(butylene adipate-co-terephthalate) and soy protein blends. Polymer 50:3770–3777Cuq B, Contard N, Guilbert S (1998) Proteins as agricultural polymers for packaging production. Am Assoc Cereal Chem 75:1–9Czub P (2006) Application of modified natural oils as reactive diluents for epoxy resins. Macromol Symp 242:60–64DdS Martini, Braga BA, Samios D (2009) On the curing of linseed oil epoxidized methyl esters with different cyclic dicarboxylic anhydrides. Polymer 50:2919–2925Dogan E, Kuesefoglu S (2008) Synthesis and in situ foaming of biodegradable malonic acid ESO polymers. J Appl Polym Sci 110:1129–1135Espinosa-Perez J, Wiesenborn DP, Tostenson K, Ulven CA, Tatlari M (2007) Preparation and partial characterization of canola-based epoxy resins for bio-based plastic composites. ASABE Annual International Meeting, 076079, Minneapolis, MNJin H, Zhang L, Chen F (2003) Effects of lignin as a filler on properties of soy protein plastics. I Lignosulfonate. J Appl Polym Sci 88:3284–3290Liu ZS, Erhan SZ, Calvert PD (2007) Solid freeform fabrication of epoxidized soybean oil/epoxy composite with bis or polyalkyleneamine curing agents. Compos Part A Appl Sci Manuf 38:87–93Matejka L, Lovy J, Pokorny S, Bouchal K, Dusek K (1983) Curing epoxy-resins with anhydrides—model reactions and reaction-mechanism. J Polym Sci Part A Polym Chem 21:2873–2885Miyagawa H, Mohanty AK, Drzal LT, Misra M (2005) Nanocomposites from bio-based epoxy and single-wall carbon nanotubes: synthesis, and mechanical and thermo-physical properties evaluation. Nanotechnology 16:118–124Mohamed A, Finkenstadt VL, Gordon SH, Palmquist DE (2010) Thermal and mechanical properties of compression-molded pMDI-reinforced PCL/gluten composites. J Appl Polym Sci 118:2778–2790Montero de Espinosa L, Ronda JC, Galià M, Cádiz V (2008) A new enone-containing triglyceride derivative as precursor of thermosets from renewable resources. J Polym Sci Part A Polym Chem 46:6843–6850Park SJ, Jin FL, Lee JR (2004) Synthesis and thermal properties of epoxidized vegetable oil. Macromol Rapid Commun 25:724–727Pfister DP, Baker RJ, Henna HP, Lu Y, Larock CR (2008) Preparation and properties of tung oil-based composites using spent germ as a natural filler. J Appl Polym Sci 108:3618–3625Reiznautt QB, Garcia ITS, Samios D (2009) Oligoesters and polyesters produced by the curing of sunflower oil epoxidized biodiesel with cis-cyclohexane dicarboxylic anhydride: synthesis and characterization. Mater Sci Eng C Mater Biol Appl 29:2302–2311Rüsch Gen Klaas M, Warwel S (1999) Complete and partial epoxidation of plant oils by lipase-catalyzed perhydrolysis. Ind Crops Prod 9:125–132Sailaja RRN, Girija BG, Madras G, Balasubramanian N (2008) Effect of compatibilization on mechanical and thermal properties of polypropylene—soy flour composites. J Mater Sci 43:64–67Samper MD, Fombuena V, Boronat T, García-Sanoguera D, Balart R (2012) Thermal and mechanical characterization of epoxy resins (ELO and ESO) cured with anhydrides. J Am Oil Chem Soc 89(8):1521–1528Sharma S (2008) Fabrication and characterization of polymer blends and composites derived from biopolymers. Philosophy Materials Science and Engineering. Graduate School of Clemson University, ClemsonSharma BK, Liu Z, Adhvaryu A, Erhan SZ (2008) One-pot synthesis of chemically modified vegetable oils. J Agric Food Chem 56:3049–3056Sue HJ, Wang S, Jane J (1997) Morphology and mechanical behaviour of engineering soy plastics. J Polym 38:5035Wang S, Sue HJ, Jane J (1996) Effects of polyhydric alcohols on the mechanical properties of soy protein plastics. J Macromol Sci Pure Appl Chem A33:557–569Wazzan AA, Al-Turaif HA, Abdelkader AF (2006) Influence of submicron TiO2 particles on the mechanical properties and fracture characteristics of cured epoxy resin. Polym Plastics Technol Eng 45:1155–116

The Eighth Central European Conference "Chemistry towards Biology": snapshot

The Eighth Central European Conference "Chemistry towards Biology" was held in Brno, Czech Republic, on 28 August – 1 September 2016The Eighth Central European Conference "Chemistry towards Biology" was held in Brno, Czech Republic, on 28 August-1 September 2016 to bring together experts in biology, chemistry and design of bioactive compounds; promote the exchange of scientific results, methods and ideas; and encourage cooperation between researchers from all over the world. The topics of the conference covered "Chemistry towards Biology", meaning that the event welcomed chemists working on biology-related problems, biologists using chemical methods, and students and other researchers of the respective areas that fall within the common scope of chemistry and biology. The authors of this manuscript are plenary speakers and other participants of the symposium and members of their research teams. The following summary highlights the major points/topics of the meeting

A comprehensive overview of radioguided surgery using gamma detection probe technology

The concept of radioguided surgery, which was first developed some 60 years ago, involves the use of a radiation detection probe system for the intraoperative detection of radionuclides. The use of gamma detection probe technology in radioguided surgery has tremendously expanded and has evolved into what is now considered an established discipline within the practice of surgery, revolutionizing the surgical management of many malignancies, including breast cancer, melanoma, and colorectal cancer, as well as the surgical management of parathyroid disease. The impact of radioguided surgery on the surgical management of cancer patients includes providing vital and real-time information to the surgeon regarding the location and extent of disease, as well as regarding the assessment of surgical resection margins. Additionally, it has allowed the surgeon to minimize the surgical invasiveness of many diagnostic and therapeutic procedures, while still maintaining maximum benefit to the cancer patient. In the current review, we have attempted to comprehensively evaluate the history, technical aspects, and clinical applications of radioguided surgery using gamma detection probe technology

Addition of ultrasound to mammography in the case of dense breast tissue: systematic review and meta-analysis.

BACKGROUND: Mammography is less effective in detecting cancer in dense than in fatty breasts. METHODS: We undertook a systematic search in PubMed to identify studies on women with dense breasts who underwent screening with mammography supplemented with ultrasound. A meta-analysis was undertaken on the proportion of cancers detected only by ultrasound, out of all screen-detected cancers, and the proportion of women with negative mammography who were referred for assessment following ultrasound screening. RESULTS: Twenty-nine studies satisfied our inclusion criteria. The proportion of total cancers detected only by ultrasound was 0.29 (95% CI: 0.27-0.31), consistent with an approximately 40% increase in the detection of cancers compared to mammography. In the studied populations, this translated into an additional 3.8 (95% CI: 3.4-4.2) screen-detected cases per 1000 mammography-negative women. About 13% (32/248) of cancers were in situ from 17 studies with information on this subgroup. Ultrasound approximately doubled the referral for assessment in three studies with these data. CONCLUSIONS: Studies have consistently shown an increased detection of breast cancer by supplementary ultrasound screening. An inclusion of supplementary ultrasound into routine screening will need to consider the availability of ultrasound and diagnostic assessment capacities.Department of Health Policy Research Programme (106/0001). Cancer Research UK (grants C8162/A16892 and C569/A16891)