The International Urban Energy Balance Comparison Project: Initial Results from Phase 2.

Many urban land surface schemes have been developed, incorporating different assumptions about the features of, and processes occurring at, the surface. Here, the first results from Phase 2 of an international comparison are presented. Evaluation is based on analysis of the last 12 months of a 15 month dataset. In general, the schemes have best overall capability to model net all-wave radiation. The models that perform well for one flux do not necessarily perform well for other fluxes. Generally there is better performance for net all wave radiation than sensible heat flux. The degree of complexity included in the models is outlined, and impacts on model performance are discussed in terms of the data made available to modellers at four successive stages

Surface Urban Energy and Water Balance Scheme (SUEWS) : Development and evaluation at two UK sites

Abstract The Surface Urban Energy and Water Balance Scheme (SUEWS) is evaluated at two locations in the UK: a dense urban site in the centre of London and a residential suburban site in Swindon. Eddy covariance observations of the turbulent fluxes are used to assess model performance over a two-year period (2011−2013). The distinct characteristics of the sites mean their surface energy exchanges differ considerably. The model suggests the largest differences can be attributed to surface cover (notably the proportion of vegetated versus impervious area) and the additional energy supplied by human activities. SUEWS performs better in summer than winter, and better at the suburban site than the dense urban site. One reason for this is the bias towards suburban summer field campaigns in observational data used to parameterise this (and other) model(s). The suitability of model parameters (such as albedo, energy use and water use) for the UK sites is considered and, where appropriate, alternative values are suggested. An alternative parameterisation for the surface conductance is implemented, which permits greater soil moisture deficits before evaporation is restricted at non-irrigated sites. Accounting for seasonal variation in the estimation of storage heat flux is necessary to obtain realistic wintertime fluxes.Peer reviewe

Evaluating single-sided natural ventilation models against full-scale idealised measurements: impact of wind direction and turbulence

Commonly single-sided natural ventilation is used in temperate climates to provide comfortable and healthy indoor environments. However, within built-up areas it is difficult to predict natural ventilation rates for buildings as they depend on many flow factors and opening type. Here, existing models are evaluated using the nine-month Refresh Cube Campaign (RCC). Pressure-based ventilation rates were determined for a small opening (1% porosity) in a cubical test building (side=6 m). The building was isolated and then sheltered in a limited staggered building array to simulate turbulent flows in dense urban areas. Internal and external flow, temperature and pressure measurements captured a wide range of scales of variability. Although the Warren and Parkins (1985, WP85) model performed best for 30-minute mean ventilation rates, all four models tested underestimated ventilation rates by a factor of 10. As wind dominated the stack effect, new coefficients were derived for the WP85 wind-driven model as a function of wind angle. Predictions were mostly improved, except for directions with complex flow patterns during the sheltered case. For the first time, the relation between ventilation rate and turbulence intensity (TI) around a full-scale building was tested. Results indicate that the wind-driven model for single-sided ventilation in highly turbulent flows (0.5<TI<4) can be improved by including TI as a multiplicative factor. Although small window openings with highly turbulent flows are common for sheltered buildings in urban areas, future model development should include a variety of configurations to assess the generality of these results

Ecosystem-Atmosphere Exchange of Carbon, Water and Energy over a Mixed Deciduous Forest in the Midwest

During the project period we continued to conduct long-term (multi-year) measurements, analysis, and modeling of energy and mass exchange in and over a deciduous forest in the Midwestern United States, to enhance the understanding of soil-vegetation-atmosphere exchange of carbon. At the time when this report was prepared, results from nine years of measurements (1998 - 2006) of above canopy CO2 and energy fluxes at the AmeriFlux site in the Morgan-Monroe State Forest, Indiana, USA (see Table 1), were available on the Fluxnet database, and the hourly CO2 fluxes for 2007 are presented here (see Figure 1). The annual sequestration of atmospheric carbon by the forest is determined to be between 240 and 420 g C m-2 a-1 for the first ten years. These estimates are based on eddy covariance measurements above the forest, with a gap-filling scheme based on soil temperature and photosynthetically active radiation. Data gaps result from missing data or measurements that were rejected in qua)lity control (e.g., during calm nights). Complementary measurements of ecological variables (i.e. inventory method), provided an alternative method to quantify net carbon uptake by the forest, partition carbon allocation in each ecosystem components, and reduce uncertainty on annual net ecosystem productivity (NEP). Biometric datasets are available on the Fluxnext database since 1998 (with the exclusion of 2006). Analysis for year 2007 is under completion

Sensitivity of Surface Urban Energy and Water Balance Scheme (SUEWS) to downscaling of reanalysis forcing data

Often the meteorological forcing data required for urban hydrological models are unavailable at the required temporal resolution or for the desired period. Although reanalysis data can provide this information, the spatial resolution is often coarse relative to cities, so downscaling is required prior to use as realistic forcing. In this study, WATCH WFDEI reanalysis data are used to force the Surface Urban Energy and Water Balance Scheme (SUEWS). From sensitivity tests in two cities, Vancouver and London with different orography, we conclude precipitation is the most important meteorological variable to be properly downscaled to obtain reliable surface hydrology results, with relative humidity being the second most important. Overestimation of precipitation in reanalysis data at the three sites gives 6-21% higher annual modelled evaporation, 26-39% higher runoff at one site and 4% lower value at one site when compared to modelled values using observed forcing data. Application of a bias correction method to the reanalysis precipitation reduces the model bias compared to using observed forcing data, when evaluated using eddy covariance evaporation measurements. (c) 2017 Elsevier B.V. All rights reserved.Often the meteorological forcing data required for urban hydrological models are unavailable at the required temporal resolution or for the desired period. Although reanalysis data can provide this information, the spatial resolution is often coarse relative to cities, so downscaling is required prior to use as realistic forcing. In this study, WATCH WFDEI reanalysis data are used to force the Surface Urban Energy and Water Balance Scheme (SUEWS). From sensitivity tests in two cities, Vancouver and London with different orography, we conclude precipitation is the most important meteorological variable to be properly downscaled to obtain reliable surface hydrology results, with relative humidity being the second most important. Overestimation of precipitation in reanalysis data at the three sites gives 6-21% higher annual modelled evaporation, 26-39% higher runoff at one site and 4% lower value at one site when compared to modelled values using observed forcing data. Application of a bias correction method to the reanalysis precipitation reduces the model bias compared to using observed forcing data, when evaluated using eddy covariance evaporation measurements. (c) 2017 Elsevier B.V. All rights reserved.Often the meteorological forcing data required for urban hydrological models are unavailable at the required temporal resolution or for the desired period. Although reanalysis data can provide this information, the spatial resolution is often coarse relative to cities, so downscaling is required prior to use as realistic forcing. In this study, WATCH WFDEI reanalysis data are used to force the Surface Urban Energy and Water Balance Scheme (SUEWS). From sensitivity tests in two cities, Vancouver and London with different orography, we conclude precipitation is the most important meteorological variable to be properly downscaled to obtain reliable surface hydrology results, with relative humidity being the second most important. Overestimation of precipitation in reanalysis data at the three sites gives 6-21% higher annual modelled evaporation, 26-39% higher runoff at one site and 4% lower value at one site when compared to modelled values using observed forcing data. Application of a bias correction method to the reanalysis precipitation reduces the model bias compared to using observed forcing data, when evaluated using eddy covariance evaporation measurements. (c) 2017 Elsevier B.V. All rights reserved.Peer reviewe

Assessing the impact of changes in surface cover, human behaviour and climate on energy partitioning across Greater London

Climate-sensitive urban design is an increasingly important consideration for city planners and policy makers. This study demonstrates the use of a biophysical model to assess the response of urban climate to various changes, including population growth, reduced energy use, urban development and urban greening initiatives. Model inputs are intentionally derived using only publicly available information and assumptions involved in collating the data are discussed. Results are summarised in terms of the energy partitioning which captures changes in meteorology, surface characteristics and human behaviour. The model has been recently evaluated for the region, and those findings are drawn upon here to discuss the model’s capabilities and limitations. Model simulations demonstrate how both intentional and inadvertent changes to the urban landscape can alter the urban climate. For example, the impact of population growth depends on where, and how, people are housed, and recent changes in garden composition have reduced evaporation. This study has been designed so that model output could be combined with socio-economic data in future, enabling both risk and vulnerability to be considered together

The Integrated WRF/Urban Modeling System: Development, Evaluation, and Applications to Urban Environmental Problems

To bridge the gaps between traditional mesoscale modeling and microscale modeling, the National Center for Atmospheric Research (NCAR), in collaboration with other agencies and research groups, has developed an integrated urban modeling system coupled to the Weather Research and Forecasting (WRF) model as a community tool to address urban environmental issues. The core of this WRF/urban modeling system consists of: 1) three methods with different degrees of freedom to parameterize urban surface processes, ranging from a simple bulk parameterization to a sophisticated multi-layer urban canopy model with an indoor outdoor exchange sub-model that directly interacts with the atmospheric boundary layer, 2) coupling to fine-scale Computational Fluid Dynamic (CFD) Reynolds-averaged Navier–Stokes (RANS) and Large-Eddy Simulation (LES) models for Transport and Dispersion (T&D) applications, 3) procedures to incorporate high-resolution urban land-use, building morphology, and anthropogenic heating data using the National Urban Database and Access Portal Tool (NUDAPT), and 4) an urbanized high-resolution land-data assimilation system (u-HRLDAS). This paper provides an overview of this modeling system; addresses the daunting challenges of initializing the coupled WRF/urban model and of specifying the potentially vast number of parameters required to execute the WRF/urban model; explores the model sensitivity to these urban parameters; and evaluates the ability of WRF/urban to capture urban heat islands, complex boundary layer structures aloft, and urban plume T&D for several major metropolitan regions. Recent applications of this modeling system illustrate its promising utility, as a regional climate-modeling tool, to investigate impacts of future urbanization on regional meteorological conditions and on air quality under future climate change scenarios

Initial results from Phase 2 of the international urban energy balance model comparison

Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making

Scale issues in soil moisture modelling: problems and prospects

Soil moisture storage is an important component of the hydrological cycle and plays a key role in land-surface-atmosphere interaction. The soil-moisture storage equation in this study considers precipitation as an input and soil moisture as a residual term for runoff and evapotranspiration. A number of models have been developed to estimate soil moisture storage and the components of the soil-moisture storage equation. A detailed discussion of the impli cation of the scale of application of these models reports that it is not possible to extrapolate processes and their estimates from the small to the large scale. It is also noted that physically based models for small-scale applications are sufficiently detailed to reproduce land-surface- atmosphere interactions. On the other hand, models for large-scale applications oversimplify the processes. Recently developed physically based models for large-scale applications can only be applied to limited uses because of data restrictions and the problems associated with land surface characterization. It is reported that remote sensing can play an important role in over coming the problems related to the unavailability of data and the land surface characterization of large-scale applications of these physically based models when estimating soil moisture storage.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline