Identification of weld defect through the application of denoising method to the sound signal acquired during pulse mode laser welding

The use of a classification model derived from the analysis of sound signals has demonstrated significant success in detecting, identifying, and characterising the weld condition, but it is affected by the filtering technique. In spite of this, denoising the transient-type signals acquired from certain types of welding remains difficult due to their unique nature. This paper describes the improvement of weld defect identification achieved by incorporating Z-score-based thresholding into the wavelet denoising algorithm for the pre-processing of sound signals. Separate sets of sound signals were gathered from the pulse mode laser welding process that produced good, crack, and porous welded joints. The acquired signal was filtered using the wavelet denoising technique, which involves the Z-score threshold. The root-mean-square and spectral entropy of both unfiltered and filtered signals were extracted, and classification models were developed using these data sets. Denoising through the Z-score threshold significantly reduced the dispersion trend of both RMS and spectral entropy, resulting in a much more distinct separation between the good weld, crack, and porosity classes. Model validation results also revealed that the model developed by the denoised signal based on the Z-score threshold had the highest efficiency among the other models, at 95%. This study demonstrates that the introduction of the Z-score threshold in wavelet denoising significantly reduced the incoherence trend of sound features, leading to a more accurate classification of weld defects. It was believed that this would pave the way for the advancement of predictive monitoring systems in laser welding applications in the future

Leakage identification based on hydraulic transient analysis

Due to the ever-increasing degree of water loss, researchers and water utility corporations are becoming increasingly concerned about water leakage control. The purpose of this paper is to apply Empirical Mode Decomposition (EMD) and Synchrosqueezed Wavelet Transforms (SWT) as signal processing to locate leaks in pipelines. The objective of this study is related with to investigate leakage detection and signal processing methods, as well as to use them to detect and locate leaks. This paper explains how to run an experiment to visualize the most common types of leakage in a pipeline system. The experiment was set up that include a specific component of the piping system and leakage attached to it. This experimental test rig also attached with pressure sensor at the top of the solenoid valve. The piezoelectric pressure sensor is used in this experiment. The findings show that the method is superior to current signal processing methods for the conditions used. The recommendation is that research can be extended by running field test in order to observe the efficiency of the method used

Pipeline fault identification using synchrosqueezed wavelet transform based on pressure transient analysis

Brand modern technology of leak detection by using pressure transient analysis has been developed and interested to research due to its advantages such as low cost, simplicity and convenient to use. This technology uses the concept of signal reflections which identify pipeline features. The method used in this study was using a pressure transducer (piezoelectric pressure sensor) to obtain pressure transient respond generated by rapid opening and closing of solenoid valve. However, such reflections are very difficult to determine the pipe characteristic most probably because of excessive noise from other sources. Therefore, this paper proposed a method called Empirical Mode Decomposition (EMD) to decompose the reflection signal to its Intrinsic Mode Function (IMFs) and further analysis using continuous wavelet transform (CWT) to transform the signal into Time-Frequency domain and spectrum diagram. From the spectrum diagram, the characteristic of the pipe can be clearly display. From the finding results, it proves that this method not only useful for leak detection but also can determine the location of leak and its magnitude with error less than 10%

Search for the Zγ decay mode of new high-mass resonances in pp collisions at √s = 13 TeV with the ATLAS detector

This letter presents a search for narrow, high-mass resonances in the Zγ final state with the Z boson decaying into a pair of electrons or muons. The √s = 13 TeV pp collision data were recorded by the ATLAS detector at the CERN Large Hadron Collider and have an integrated luminosity of 140 fb−1. The data are found to be in agreement with the Standard Model background expectation. Upper limits are set on the resonance production cross section times the decay branching ratio into Zγ. For spin-0 resonances produced via gluon–gluon fusion, the observed limits at 95% confidence level vary between 65.5 fb and 0.6 fb, while for spin-2 resonances produced via gluon–gluon fusion (or quark–antiquark initial states) limits vary between 77.4 (76.1) fb and 0.6 (0.5) fb, for the mass range from 220 GeV to 3400 GeV

Search for boosted diphoton resonances in the 10 to 70 GeV mass range using 138 fb−1 of 13 TeV pp collisions with the ATLAS detector

A search for diphoton resonances in the mass range between 10 and 70 GeV with the ATLAS experiment at the Large Hadron Collider (LHC) is presented. The analysis is based on pp collision data corresponding to an integrated luminosity of 138 fb−1 at a centre-of-mass energy of 13 TeV recorded from 2015 to 2018. Previous searches for diphoton resonances at the LHC have explored masses down to 65 GeV, finding no evidence of new particles. This search exploits the particular kinematics of events with pairs of closely spaced photons reconstructed in the detector, allowing examination of invariant masses down to 10 GeV. The presented strategy covers a region previously unexplored at hadron colliders because of the experimental challenges of recording low-energy photons and estimating the backgrounds. No significant excess is observed and the reported limits provide the strongest bound on promptly decaying axion-like particles coupling to gluons and photons for masses between 10 and 70 GeV

Evidence for the charge asymmetry in pp → tt¯ production at s√ = 13 TeV with the ATLAS detector

Inclusive and differential measurements of the top–antitop (tt¯) charge asymmetry Att¯C and the leptonic asymmetry Aℓℓ¯C are presented in proton–proton collisions at s√ = 13 TeV recorded by the ATLAS experiment at the CERN Large Hadron Collider. The measurement uses the complete Run 2 dataset, corresponding to an integrated luminosity of 139 fb−1, combines data in the single-lepton and dilepton channels, and employs reconstruction techniques adapted to both the resolved and boosted topologies. A Bayesian unfolding procedure is performed to correct for detector resolution and acceptance effects. The combined inclusive tt¯ charge asymmetry is measured to be Att¯C = 0.0068 ± 0.0015, which differs from zero by 4.7 standard deviations. Differential measurements are performed as a function of the invariant mass, transverse momentum and longitudinal boost of the tt¯ system. Both the inclusive and differential measurements are found to be compatible with the Standard Model predictions, at next-to-next-to-leading order in quantum chromodynamics perturbation theory with next-to-leading-order electroweak corrections. The measurements are interpreted in the framework of the Standard Model effective field theory, placing competitive bounds on several Wilson coefficients

Search for single production of vector-like T quarks decaying into Ht or Zt in pp collisions at s√ = 13 TeV with the ATLAS detector

This paper describes a search for the single production of an up-type vector-like quark (T) decaying as T → Ht or T → Zt. The search utilises a dataset of pp collisions at s√ = 13 TeV collected with the ATLAS detector during the 2015–2018 data-taking period of the Large Hadron Collider, corresponding to an integrated luminosity of 139 fb−1. Data are analysed in final states containing a single lepton with multiple jets and b-jets. The presence of boosted heavy resonances in the event is exploited to discriminate the signal from the Standard Model background. No significant excess above the Standard Model expectation is observed, and 95% CL upper limits are set on the production cross section of T quarks in different decay channels. The results are interpreted in several benchmark scenarios to set limits on the mass and universal coupling strength (κ) of the vector-like quark. For singlet T quarks, κ values above 0.53 are excluded for all masses below 2.3 TeV. At a mass of 1.6 TeV, κ values as low as 0.35 are excluded. For T quarks in the doublet scenario, where the production cross section is much lower, κ values above 0.72 are excluded for all masses below 1.7 TeV, and this exclusion is extended to κ above 0.55 for low masses around 1.0 TeV

Search for excited τ-leptons and leptoquarks in the final state with τ-leptons and jets in pp collisions at s√ = 13 TeV with the ATLAS detector

A search is reported for excited τ-leptons and leptoquarks in events with two hadronically decaying τ-leptons and two or more jets. The search uses proton-proton (pp) collision data at s√ = 13 TeV recorded by the ATLAS experiment during the Run 2 of the Large Hadron Collider in 2015–2018. The total integrated luminosity is 139 fb−1. The excited τ-lepton is assumed to be produced and to decay via a four-fermion contact interaction into an ordinary τ-lepton and a quark-antiquark pair. The leptoquarks are assumed to be produced in pairs via the strong interaction, and each leptoquark is assumed to couple to a charm or lighter quark and a τ-lepton. No excess over the background prediction is observed. Excited τ-leptons with masses below 2.8 TeV are excluded at 95% CL in scenarios with the contact interaction scale Λ set to 10 TeV. At the extreme limit of model validity where Λ is set equal to the excited τ-lepton mass, excited τ-leptons with masses below 4.6 TeV are excluded. Leptoquarks with masses below 1.3 TeV are excluded at 95% CL if their branching ratio to a charm quark and a τ-lepton equals 1. The analysis does not exploit flavour-tagging in the signal region

Measurement of the cross-sections of the electroweak and total production of a Zγ pair in association with two jets in pp collisions at √s = 13 TeV with the ATLAS detector

This Letter presents the measurement of the fiducial and differential cross-sections of the electroweak production of a Zγ pair in association with two jets. The analysis uses 140 fb−1 of LHC proton–proton collision data taken at √s = 13 TeV recorded by the ATLAS detector during the years 2015–2018. Events with a Z boson candidate decaying into either an e+e− or μ+μ− pair, a photon and two jets are selected. The electroweak component is extracted by requiring a large dijet invariant mass and by using the information about the centrality of the system and is measured with an observed and expected significance well above five standard deviations. The fiducial pp → Zγ jj cross-section for the electroweak production is measured to be 3.6 ± 0.5 fb. The total fiducial cross-section that also includes contributions where the jets arise from strong interactions is measured to be 16.8+2.0 −1.8 fb. The results are consistent with the Standard Model predictions. Differential cross-sections are also measured using the same events and are compared with parton-shower Monte Carlo simulations. Good agreement is observed between data and predictions

Search for light long-lived neutral particles that decay to collimated pairs of leptons or light hadrons in pp collisions at s√ = 13 TeV with the ATLAS detector

A search for light long-lived neutral particles with masses in the O(MeV–GeV) range is presented. The analysis targets the production of long-lived dark photons in the decay of a Higgs boson produced via gluon–gluon fusion or in association with a W boson. Events that contain displaced collimated Standard Model fermions reconstructed in the calorimeter or muon spectrometer are selected in 139 fb−1 of s√ = 13 TeV pp collision data collected by the ATLAS detector at the LHC. Background estimates for contributions from Standard Model processes and instrumental effects are extracted from data. The observed event yields are consistent with the expected background. Exclusion limits are reported on the production cross-section times branching fraction as a function of the mean proper decay length cτ of the dark photon, or as a function of the dark-photon mass and kinetic mixing parameter that quantifies the coupling between the Standard Model and potential hidden (dark) sectors. A Higgs boson branching fraction above 1% is excluded at 95% CL for a Higgs boson decaying into two dark photons for dark-photon mean proper decay lengths between 10 mm and 250 mm and dark photons with masses between 0.4 GeV and 2 GeV