382 research outputs found

    Variabilidad lateral para evaluar la velocidad de respuesta de una carta de control de procesos

    Get PDF
    La Ingeniería Industrial juega actualmente un rol esencial en el monitoreo de procesos que siguen la metodología Six Sigma. Las Cartas de Control Estadístico permiten monitorearlos periódicamente. La velocidad de su respuesta es evaluada mediante la Longitud de Corrida y merece atención especial, juega un papel determinante en la búsqueda de una carta que se ajuste a las características de producción. La elevada dispersión y marcada asimetría de la Longitud de Corrida hacen que la Variabilidad Total (Coeficiente de Variación) no describa adecuadamente la dispersión de aquella longitud. En publicaciones anteriores, los autores propusieron variabilidades laterales acordes a cada estado del proceso. El objetivo del trabajo es evaluar cuantitativamente las ventajas de su uso. El método empleado fue el análisis de la razón variabilidad lateral/variabilidad total en cartas seleccionadas. Los resultados alcanzados evidencian tales ventajas, se hacen más notorias en el uso de muestras y en el interés por los corrimientos grandes en la media del proceso. Se ilustran dos casos donde se destacan las diferencias entre los criterios convencional y no convencional para evaluar la velocidad de respuesta de una carta.Industrial Engineering currently plays an essential role in the processes monitoring that follow the Six Sigma methodology. Statistical Control Charts allow to monitor them periodically. Its response speed is evaluated by the Run Length and deserves special attention, it plays a decisive role in the search for a Control Chart according to the characteristics of production. The high dispersion and strong skewness of the Run Length do that the Total Variability (Coefficient of Variation) does not adequately describe the dispersion of that length. In previous publications, the authors proposed lateral variabilities suitable for each state of the process. The aim of this work is to evaluate quantitatively the advantages of its use. The used method was the analysis of the ratio lateral variability/total variability in selected charts. The results achieved demonstrate such benefits, these are most noticeable in the use of samples and in the interest by the large shifts in the process mean. Two cases are illustrated where one emphasizes the differences between the conventional and unconventional criteria to evaluate the response speed of a Control Chart

    Variabilidad lateral para evaluar la velocidad de respuesta de una carta de control de procesos

    Get PDF
    La Ingeniería Industrial juega actualmente un rol esencial en el monitoreo de procesos que siguen la metodología Six Sigma. Las Cartas de Control Estadístico permiten monitorearlos periódicamente. La velocidad de su respuesta es evaluada mediante la Longitud de Corrida y merece atención especial, juega un papel determinante en la búsqueda de una carta que se ajuste a las características de producción. La elevada dispersión y marcada asimetría de la Longitud de Corrida hacen que la Variabilidad Total (Coeficiente de Variación) no describa adecuadamente la dispersión de aquella longitud. En publicaciones anteriores, los autores propusieron variabilidades laterales acordes a cada estado del proceso. El objetivo del trabajo es evaluar cuantitativamente las ventajas de su uso. El método empleado fue el análisis de la razón variabilidad lateral/variabilidad total en cartas seleccionadas. Los resultados alcanzados evidencian tales ventajas, se hacen más notorias en el uso de muestras y en el interés por los corrimientos grandes en la media del proceso. Se ilustran dos casos donde se destacan las diferencias entre los criterios convencional y no convencional para evaluar la velocidad de respuesta de una carta.Industrial Engineering currently plays an essential role in the processes monitoring that follow the Six Sigma methodology. Statistical Control Charts allow to monitor them periodically. Its response speed is evaluated by the Run Length and deserves special attention, it plays a decisive role in the search for a Control Chart according to the characteristics of production. The high dispersion and strong skewness of the Run Length do that the Total Variability (Coefficient of Variation) does not adequately describe the dispersion of that length. In previous publications, the authors proposed lateral variabilities suitable for each state of the process. The aim of this work is to evaluate quantitatively the advantages of its use. The used method was the analysis of the ratio lateral variability/total variability in selected charts. The results achieved demonstrate such benefits, these are most noticeable in the use of samples and in the interest by the large shifts in the process mean. Two cases are illustrated where one emphasizes the differences between the conventional and unconventional criteria to evaluate the response speed of a Control Chart

    Electrical response of liquid crystal cells doped with multi-walled carbon nanotubes

    Get PDF
    The inclusion of nanoparticles modifies a number of fundamental properties of many materials. Doping of nanoparticles in self-organized materials such as liquid crystals may be of interest for the reciprocal interaction between the matrix and the nanoparticles. Elongated nanoparticles and nanotubes can be aligned and reoriented by the liquid crystal, inducing noticeable changes in their optical and electrical properties. In this work, cells of liquid crystal doped with high aspect ratio multi-walled carbon nanotubes have been prepared, and their characteristic impedance has been studied at different frequencies and excitation voltages. The results demonstrate alterations in the anisotropic conductivity of the samples with the applied electric field, which can be followed by monitoring the impedance evolution with the excitation voltage. Results are consistent with a possible electric contact between the coated substrates of the LC cell caused by the reorientation of the nanotubes. The reversibility of the doped system upon removal of the electric field is quite lo

    Colgajo del músculo sóleo. Presentación de un paciente

    Get PDF
    Lower limbs open fractures with the exposition of the bone or tendon are a challenge for the surgical intervention of the trauma. The case of a patient with post-traumatic bone exposure is presented here. A soleus muscle flap was used in order to cover the defect of the soft parts. The coverage was completed with a skin graft of partial thickness. The results were satisfactory.Las fracturas abiertas de la extremidad inferior con hueso o tendón expuestos son un desafío en la intervención quirúrgica del trauma. Se realiza la presentación clínica de un paciente con exposición ósea postraumática en el que se utilizó un colgajo a expensas del músculo sóleo para cubrir el defecto de las partes blandas; la cobertura se completó con un injerto cutáneo de grosor parcial y se obtuvo un resultado satisfactorio

    Injerto óseo autólogo: una solución para el defecto óseo tibial en la artroplastia de rodilla

    Get PDF
    Today, the performance of a total knee arthroplasty is a common procedure. One of the greatest challenges are the bone defects in the tibia articular surface of the tibia as a result of an angular deformities in varus o valgus. One option to deal with this problem is the reconstruction of bone defects using autogenous bone graft. It is performed in the present study a review of  the possibilities of reconstruction of this bone defects and a patient is presented with a diagnosis of tributary  tricompartmental gonarthrosis of prosthetic replacement with  tibial bone defect to which the Windsor´s technique et al. was performed. (reconstruction with graft taken from the resected distal femoral condyles) with satisfactory results. This alternative ensures a placement of a stable prosthesis.Hoy día la realización de una artroplastia total de rodilla es un procedimiento común. Uno de los mayores desafíos lo constituyen los defectos óseos en la superficie  articular  de  la  tibia como resultado de deformidades angulares en varo o valgo. Una opción para enfrentar este problema es la reconstrucción del defecto óseo con la utilización de injerto óseo autógeno. Se realiza en el presente trabajo una  revisión  de las  posibilidades  de  reconstrucción de ese defecto óseo y se presenta un paciente con diagnóstico de gonartrosis tricompartimental tributario de reemplazo protésico con defecto óseo tibial al que se le realizó la técnica de Windsor y colaboradores (reconstrucción con injerto tomado de los cóndilos femorales distales resecados) con resultado satisfactorio. Esta alternativa garantiza la colocación de una prótesis estable

    Fijación externa RALCA con montaje monopolar doble en las fracturas abiertas de tibia

    Get PDF
    A work on open tibial fractures that were treated as emergencies with dual monopolar external fixation at the Arnaldo Milian Castro Clinical-Surgical Hospital in Santa Clara, Villa Clara, from January 2011 to January 2012 is presented in this article. The Basic Working Group treated a total of 25 patients with the diagnosis of open tibial fracture. As a method of surgical treatment, they underwent emergency dual monopolar external fixation with RALCA system, with or without other means for osteosynthesis. With the use of the monopolar, it was achieved a minimally invasive early stabilization of the fracture within the first 24 hours. The evolution and hospital stay were favorable, there was a better performance on soft tissue and in early rehabilitation of the patients, with faster reincorporation into society. The use of this type of external fixation in open tibial fractures is recommended.Se presenta un trabajo sobre fracturas abiertas de tibias tratadas de urgencia con fijación externa monopolar doble en el Hospital Clínico Quirúrgico “Arnaldo Milián Castro” de Santa Clara, Villa Clara, entre los meses de enero de 2011 y enero de 2012. Se trataron, por el Grupo Básico de Trabajo, un total de 25 pacientes con el diagnóstico de fractura abierta de tibia a los que se les aplicó, como método de tratamiento quirúrgico, el uso de la fijación externa monopolar doble de urgencia con el sistema Rodrigo Álvarez Cambras asociado o no a otros medios de osteosíntesis. Se logró, con el uso del monopolar, una estabilización precoz de la fractura con un mínimo de invasión en las primeras 24 horas; la evolución y el tiempo de estadía fueron favorables; hubo una mejor actuación sobre partes blandas y una rehabilitación temprana del paciente, con una incorporación más rápida a la vida social. Se recomienda el uso de este tipo de fijación externa en las fracturas abiertas de tibia

    Metal nanoparticles-PDMS nanocomposites for tunable optical filters and sensors

    Get PDF
    The peculiar optical response of polydimethylsiloxane (PDMS) doped with metallic nanoparticles can be employed to develop optical sensing materials. These nanocomposites may work in an ample range of temperatures, showing good linearity and high sensitivity. Plasmon resonances of the metallic nanoparticles produce interesting effects on the optical response by affecting the effective refractive index of PDMS. The high resonant response leads to a number of different configurations of optical filters and phase devices whose resonant frequency depends on the chosen nanoparticle. Moreover, the wavelength can be tuned up by external manufacturing conditions such as nanoparticle size or fill factor, and by working parameters such as temperature. This work develops the theoretical background required for the design of these structures, and evaluates the adequate dimensional and doping ranges for device optimization.This work was supported by Spanish Government RETOS Program grant no. TEC2013-47342-C2-R and no. TEC2013-50138-EXP, the R&D Program SINFOTON S2013/MIT-2790 of the Comunidad de Madrid, and the European COST Action IC1208

    Granuloma telangiectásico bucal: lesión sangrante tratada con láser de diodo de 940nm en paciente pediátrico. Reporte de caso

    Get PDF
    El granuloma telangiectásico bucal es una lesión hiperplásica benigna que ocurre en respuesta a un traumatismo o irritación crónica en la cavidad oral. El aspecto histológico característico comprende un tejido de granulación típico con una proliferación de pequeños vasos sanguíneos de paredes delgadas en el tejido conectivo laxo y el tratamiento de elección es el quirúrgico. El propósito del trabajo es reportar el caso de un paciente pediátrico con granuloma telangiectásico bucal sangrante, en el que se describen las características clínicas, histológicas y la terapéutica con láser de diodo con buenos resultados posquirúrgicos.Oral telangiectatic granuloma is a benign hyperplastic lesion that occurs in response to trauma or chronic irritation in the oral cavity. The characteristic histological appearance comprises a typical granulation tissue with a proliferation of small, thin-walled blood vessels in the loose connective tissue and the treatment of choice is surgical. The purpose of the work is to report the case of a pediatric patient with bleeding oral telangiectatic granuloma, in which the clinical and histological characteristics and diode laser therapy with good postoperative results are described

    Complicación postquirúrgica de un dedo en garra rígido tratado mediante artroplastia de Duvries. A propósito de un caso

    Get PDF
    Las deformidades de los dedos menores del pie constituyen un motivo de consulta habitual en la práctica clínica diaria. Estas deformidades se producen en los planos frontal, transversal o sagital o en planos combinados presentándose en ocasiones con una clínica asociada que incapacita al paciente de tal manera que requieren de un tratamiento quirúrgico eficaz y definitivo. En el presente artículo se expone el caso de un paciente intervenido de dedo en martillo rígido mediante artroplastia de DuVries y el posterior manejo de las complicaciones producidas hasta el alta quirúrgica

    Use of plasma rich in growth factors in patients with knee osteoarthritis

    Get PDF
    Introducción: la osteoartritis es uno de los principales problemas de salud a nivel mundial debido a su alta prevalencia. Objetivo: determinar la efectividad y la seguridad del tratamiento con plasma rico en factores de crecimiento en la osteoartritis de rodilla. Métodos: se realizó una investigación en sistemas y servicios de salud, con enfoque sistémico pre experimental, prospectivo multicéntrico abierto. La muestra quedó conformada por 152 pacientes sometidos a este procedimiento en el Hospital “Arnaldo Milián Castro” de Santa Clara durante el período comprendido entre marzo de 2014 a diciembre de 2015. El seguimiento fue al mes, a los seis meses y al año. Se evaluaron variables clínicas y hematológicas que conforman el protocolo para este procedimiento y se emplearon escalas y exámenes de laboratorio especializados. Los datos obtenidos fueron sometidos al análisis estadístico-matemático. Resultados: la osteoartritis de rodilla predominó en el sexo femenino y en la tercera edad, la comorbilidad estuvo presente en la mayoría de los enfermos (la hipertensión arterial resultó la más frecuente), predominaron los grados II y III, sin asociación con la lateralidad y la presencia de deformidad, fueron significativas la reducción del consumo de medicamentos al año del tratamiento y la presencia de dolor, el peso corporal no mostró reducción y hubo escasas complicaciones. Conclusiones: la aplicación del plasma rico en factores de crecimiento autólogo es viable y segura en el tratamiento de la osteoartritis de rodilla.Introduction: Osteoarthritis is one of the main health problems worldwide due to its high prevalence. Objective: Determine the effectiveness and safety of the treatment with plasma rich in growth factors in knee osteoarthritis. Methods: A study was conducted in health systems and services with a pre-experimental, prospective, open and multicentre systemic approach. The sample consisted of 152 patients who underwent this procedure at the Arnaldo Milián Castro Hospital in Santa Clara from March 2014 to December 2015. The follow-up was carried out at one month, six months and one year. The clinical and hematological variables of the protocol for this procedure were assessed, and specialized scales and laboratory tests were used. The collected data underwent a statistical-mathematical analysis. Results: Knee osteoarthritis predominated in females and in third-age patients; comorbidity was present in most of the patients (arterial hypertension was the most frequent); grades II and III predominated, without association with laterality and the presence of deformity; at one year of treatment, there was a significant reduction in drug consumption, as well as a significant reduction of pain; body weight showed no reduction and there were few complications. Conclusions: The use of plasma rich in autologous growth factors is viable and safe in the treatment of knee osteoarthritis
    corecore