Scientometric study of treatment technologies of soil pollution: present and future challenges

There are few bibliometric studies showing current technologies and their combinations for the remediation of contaminated soils. For this reason, a scientometric study was carried out in order to know the trends in soil contamination treatment technologies. The study considered original articles and reviews published in the Scopus and Web of Science databases between January 2010 and June 2021, evaluating: (a) characteristics of the publications, (b) main research sources, (c) citations and production by journals, (d) keywords used, (e) countries, institutions and authors active in research production, (f) most cited articles and (g) trends in soil treatment and remediation techniques. The results showed: (a) continuous growth of publications on soil remediation in the “Environmental Science” subject area and a limited contribution of the “Soil Science” and “Agriculture and Biological Science” subject areas, (b) leadership of countries such as China, USA, India, Italy and Spain in research production, (c) phytoremediation, bioremediation and biodegradation were the most studied treatment technologies in the last decade and (d) recent research (from 2020) studied pesticides and herbicides, including Chlorimuron-ethyl and also microplastics and other emerging pollutants. It is also noted that the current trend of combinations of techniques for the treatment of soil contamination is attractive for future research.Campus San Juan de Luriganch

Statistical modeling approach for PM10 prediction before and during confinement by COVID-19 in South Lima, Perú

A total of 188,859 meteorological-PM10 data validated before (2019) and during the COVID-19 pandemic (2020) were used. In order to predict PM10 in two districts of South Lima in Peru, hourly, daily, monthly and seasonal variations of the data were analyzed. Principal Component Analysis (PCA) and linear/nonlinear modeling were applied. The results showed the highest annual average PM10 for San Juan de Mirafores (SJM) (PM10-SJM: 78.7 µg/m3) and the lowest in Santiago de Surco (SS) (PM10 -SS: 40.2 µg/m3). The PCA showed the infuence of relative humidity (RH)-atmospheric pressure (AP)temperature (T)/dew point (DP)-wind speed (WS)-wind direction (WD) combinations. Cool months with higher humidity and atmospheric instability decreased PM10 values in SJM and warm months increased it, favored by thermal inversion (TI). Dust resuspension, vehicular transport and stationary sources contributed more PM10 at peak times in the morning and evening. The Multiple linear regression (MLR) showed the best correlation (r = 0.6166), followed by the three-dimensional model LogAP-LogWD-LogPM10 (r = 0.5753); the RMSE-MLR (12.92) exceeded that found in the 3D models (RMSE < 0.3) and the NSE-MLR criterion (0.3804) was acceptable. PM10 prediction was modeled using the algorithmic approach in any scenario to optimize urban management decisions in times of pandemic.Campus San Juan de Luriganch

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

XVII International Congress of Control Electronics and Telecommunications: "Advanced Science, Technology and Innovation to move towards a new socio-technical system: Sustainable Social Transformation"

Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of batsContent: Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of bat