Forest Remote Sensing in Canada and the Individual Tree Crown (ITC) Approach to Forest Inventories

After a brief description of Canada’s forest situation and the role of the federal government in forestry, some Natural Resources Canada’country-wide project will be introduced. These include the National Forest Inventories (past and present), the National Forest Information System, the EOSD programs to map land cover, monitor change and evaluate biomass, mostly from Canada-wide coverages with Landsat images. The accounting of carbon and the monitoring of deforestation at a map scale level will also be introduced. The second and most significant part of this paper will describe our Individual Tree Crown (ITC) approach to forest inventories used with high spatial resolution images (better than 1m/pixel). Techniques for individual crown delineation, species classification and regrouping into forest stands that are leading to a semi-automatic production of forest inventories will be described.A locally adaptive technique for tree counts, mostly reserved for young regenerating areas, will also be presented. The synergy of multispectral and LIDAR data (atmany levels) will be examined and, the normalization of spectral values within and among aerial images will be considered.Article信州大学農学部紀要. 46(1-2): 85-92 (2010)departmental bulletin pape

Structural properties of laminated Douglas fir/epoxy composite material

This publication contains a compilation of static and fatigue strength data for laminated-wood material made from Douglas fir and epoxy. Results of tests conducted by several organizations are correlated to provide insight into the effects of variables such as moisture, size, lamina-to-lamina joint design, wood veneer grade, and the ratio of cyclic stress to steady stress during fatigue testing. These test data were originally obtained during development of wood rotor blades for large-scale wind turbines of the horizontal-axis (propeller) configuration. Most of the strength property data in this compilation are not found in the published literature. Test sections ranged from round cylinders 2.25 in. in diameter to rectangular slabs 6 by 24 in. in cross section and approximately 30 ft. long. All specimens were made from Douglas fir veneers 0.10 in. thick, bonded together with the WEST epoxy system developed for fabrication and repair of wood boats. Loading was usually parallel to the grain. Size effects (reduction in strength with increase in test volume) are observed in some of the test data, and a simple mathematical model is presented that includes the probability of failure. General characteristics of the wood/epoxy laminate are discussed, including features that make it useful for a wide variety of applications

Magnetic anisotropy determination and magnetic hyperthermia properties of small Fe nanoparticles in the superparamagnetic regime

We report on the magnetic and hyperthermia properties of iron nanoparticles synthesized by organometallic chemistry. They are 5.5 nm in diameter and display a saturation magnetization close to the bulk one. Magnetic properties are dominated by the contribution of aggregates of nanoparticles with respect to individual isolated nanoparticles. Alternative susceptibility measurements are been performed on a low interacting system obtained after eliminating the aggregates by centrifugation. A quantitative analysis using the Gittleman s model allow a determination of the effective anisotropy Keff = 1.3 * 10^5 J.m^{-3}, more than two times the magnetocristalline value of bulk iron. Hyperthermia measurements are performed on agglomerates of nanoparticles at a magnetic field up to 66 mT and at frequencies in the range 5-300 kHz. Maximum measured SAR is 280 W/g at 300 kHz and 66 mT. Specific absorption rate (SAR) displays a square dependence with the magnetic field below 30 mT but deviates from this power law at higher value. SAR is linear with the applied frequency for mu_0H=19 mT. The deviations from the linear response theory are discussed. A refined estimation of the optimal size of iron nanoparticles for hyperthermia applications is provided using the determined effective anisotropy value

New insights into the early evolution of horizontal spiral trace fossils and the age of the Brioverian series (Ediacaran-Cambrian) in Brittany, NW France

In northwestern France, the Brioverian series is a thick siliciclastic succession deposited during the Cadomian cycle (c. 750-540 Ma). In the uppermost Brioverian beds, previous studies unravelled an assemblage dominated by simple horizontal trace fossils associated with microbially stabilized surfaces. Here, we report Spirodesmos trace fossils - one-way, irregular and regular horizontal spirals - from Crozon (Finistère, Brittany), Montfort-sur-Meu and St-Gonlay (Ille-et-Vilaine, Brittany). After reviewing the literature on horizontal spiral trace fossils, an Ediacaran-Fortunian Spirodesmos pool is identified from marginal-marine to shelf settings, while an Ordovician-Recent trend formed in the deep-marine realm. These results suggest that an onshore-offshore migration in Spirodesmos took place during Ediacaran-Fortunian to Ordovician time, similar to what happened in graphoglyptids. In addition, the age of the uppermost Brioverian beds (Ediacaran or early Cambrian) is still a pending question. Here, we report two new U-Pb detrital zircon datings from sandstone samples in St-Gonlay, giving maximum deposition ages of 551 ± 7 Ma and 540 ± 5 Ma. Although these results do not discard an Ediacaran age for the uppermost Brioverian beds, a Fortunian age is envisioned because the new dating corroborates previous dating from Brittany, Mayenne and Normandy. However, the intervals of error of the radiometric dating, and the dominance of non-penetrative trace fossils associated with matgrounds (an ecology more typical of the Ediacaran Period), do not allow definitive conclusions on the age of the uppermost Brioverian beds

Computer-Generated Ovaries to Assist Follicle Counting Experiments

Precise estimation of the number of follicles in ovaries is of key importance in the field of reproductive biology, both from a developmental point of view, where follicle numbers are determined at specific time points, as well as from a therapeutic perspective, determining the adverse effects of environmental toxins and cancer chemotherapeutics on the reproductive system. The two main factors affecting follicle number estimates are the sampling method and the variation in follicle numbers within animals of the same strain, due to biological variability. This study aims at assessing the effect of these two factors, when estimating ovarian follicle numbers of neonatal mice. We developed computer algorithms, which generate models of neonatal mouse ovaries (simulated ovaries), with characteristics derived from experimental measurements already available in the published literature. The simulated ovaries are used to reproduce in-silico counting experiments based on unbiased stereological techniques; the proposed approach provides the necessary number of ovaries and sampling frequency to be used in the experiments given a specific biological variability and a desirable degree of accuracy. The simulated ovary is a novel, versatile tool which can be used in the planning phase of experiments to estimate the expected number of animals and workload, ensuring appropriate statistical power of the resulting measurements. Moreover, the idea of the simulated ovary can be applied to other organs made up of large numbers of individual functional units

Multi-band Superconductivity in the Chevrel Phases SnMo6S8 and PbMo6S8

Sub-Kelvin scanning tunnelling spectroscopy in the Chevrel Phases SnMo6S8 and PbMo6S8 reveals two distinct superconducting gaps with Delta_1 = 3 meV, Delta_2 ~ 1.0 meV and Delta_1 = 3.1 meV, Delta_2 ~ 1.4 meV respectively. The gap distribution is strongly anisotropic, with Delta_2 predominantly seen when scanning across unit-cell steps on the (001) sample surface. The spectra are well-fitted by an anisotropic two-band BCS s-wave gap function. Our spectroscopic data are confirmed by electronic heat capacity measurements which also provide evidence for a twin-gap scenario.Comment: 5 pages, 4 figure

Knee arthodesis using a modular customized intramedullary nail

SummaryIntroductionArthrodesis of the knee, particularly in infectious situations, can be achieved using either an external fixator or an intramedullary device. The objective of this study is to report the clinical, functional, and radiographic outcomes of a continuous series of 19 cases of knee arthrodesis using a customized modular intramedullary nailing system.HypothesisThe modular intramedullary nail offers a satisfactory functional result while maintaining limb length, in spite of a nonunion risk, since acting like a true endoprosthesis.Material and methodsIn our retrospective series of 19 patients, the main source of patients were infected total knee replacements. The nail was customized from assembling a dual surface-sanded titanium component (femoral and tibial). The Lequesne Algofunctional score and the WOMAC score were recorded, as well as the length discrepancy between the lower extremities. Arthrodesis consolidation and the nail's fit in the shaft were verified on anterior-posterior (AP) and lateral radiographs.ResultsFive complications were observed: one anterior cortical break, one excessive tibial rotation, two cases of delayed union, and one nail revision due to residual nail instability. The postoperative Lequesne Algofunctional score was 13/24 and the WOMAC score 57/100. The nonunion rate was 32%. From a functional point of view, the patients who did not achieve complete union and those who did had similar scores. The subjective results were not as good in patients who did not achieve final consolidation.DiscussionModular intramedullary nailing simplifies the technique, shortens the procedure, and reduces the amount of blood loss at surgery. Our nonunion rate was high, although the functional result did not seem compromized by such nonunion. The risk of long-term implant failure was not studied and requires longer follow-up studies.Level of evidenceLevel IV therapeutic study

Canadian packaged gluten-free foods are less nutritious than their regular gluten-containing counterparts

Background A strict gluten-free (GF) diet is required for the management of celiac disease (CD). The nutritional adequacy of this diet has been questioned due to the elimination of wheat, an important vehicle for micronutrient fortification and source of fibre. While novel and/or reformulated packaged GF products have rapidly entered the marketplace, providing alternatives to wheat-based staples, it is unknown whether these new products are nutritionally comparable. Methods From a database of 3,851 foods collected across 21 grocery stores in Eastern Canada, we compared the nutrient content of 398 unique GF items with 445 gluten-containing (GC) equivalents. Wilcoxon rank tests were conducted on listed nutrient content (g, mg, µg) per 100 g of product and the nutrient contribution of iron, folate and fibre were evaluated using Health Canada’s nutrient claim regulations. Results GF staples (cereals, breads, flours, pastas) contained 1.3 times more fat and less iron (by 55%), folate (by 44%) and protein (by 36%), than GC counterparts (P < 0.0001). On average, GF pastas had only 37% of the fibre in GC pastas (P < 0.0001). Notably, GF and GC flours were equivalent in nutrient content. Despite GF and GC flours having similar nutritional content, the vast majority of the processed GF foods fell short in key nutrients. Discussion Packaged GF foods in Canada are generally less nutritious than their GC counterparts, suggesting that GF diets should not be promoted to those who do not require it. The use of nutrient-dense GF flours in homemade foods may improve nutrient intakes on the GF diet

Phonon Mode Spectroscopy, Electron-Phonon Coupling and the Metal-Insulator Transition in Quasi-One-Dimensional M2Mo6Se6

We present electronic structure calculations, electrical resistivity data and the first specific heat measurements in the normal and superconducting states of quasi-one-dimensional M2Mo6Se6 (M = Tl, In, Rb). Rb2Mo6Se6 undergoes a metal-insulator transition at ~170K: electronic structure calculations indicate that this is likely to be driven by the formation of a dynamical charge density wave. However, Tl2Mo6Se6 and In2Mo6Se6 remain metallic down to low temperature, with superconducting transitions at Tc = 4.2K and 2.85K respectively. The absence of any metal-insulator transition in these materials is due to a larger in-plane bandwidth, leading to increased inter-chain hopping which suppresses the density wave instability. Electronic heat capacity data for the superconducting compounds reveal an exceptionally low density of states DEF = 0.055 states eV^-1 atom^-1, with BCS fits showing 2Delta/kBTc >= 5 for Tl2Mo6Se6 and 3.5 for In2Mo6Se6. Modelling the lattice specific heat with a set of Einstein modes, we obtain the approximate phonon density of states F(w). Deconvolving the resistivity for the two superconductors then yields their electron-phonon transport coupling function a^2F(w). In Tl2Mo6Se6 and In2Mo6Se6, F(w) is dominated by an optical "guest ion" mode at ~5meV and a set of acoustic modes from ~10-30meV. Rb2Mo6Se6 exhibits a similar spectrum; however, the optical phonon has a lower intensity and is shifted to ~8meV. Electrons in Tl2Mo6Se6 couple strongly to both sets of modes, whereas In2Mo6Se6 only displays significant coupling in the 10-18meV range. Although pairing is clearly not mediated by the guest ion phonon, we believe it has a beneficial effect on superconductivity in Tl2Mo6Se6, given its extraordinarily large coupling strength and higher Tc compared to In2Mo6Se6.Comment: 16 pages, 13 figure

En reconstruction mammaire : intérêt du dépistage du portage de Staphylococcus aureus dans la prévention de l’infection du site opératoire

National audienceThe incidence of prosthesis infections after breast reconstruction is of the order of 4% to 13% according to the literature. In surgical patients, Staphylococcus aureus (S. aureus) is the bacterial species most often responsible for surgical site infections. In cardiac surgery, screening for carriage of S. aureus and preoperative decontamination are carried out routinely before prosthetic surgery. We retrospectively reviewed data from patients at our institution between January 2011 and December 2013. Our series showed that the prosthesis infection rates were in the range of 5.92% in 2008 with an ISO rate of S. aureus 3.61%. Routine screening for prosthetic reconstructions was performed to assess the impact of preoperative decontamination patients in carriers of S. aureus. This screening was done in 381 patients: 17.8% of patients were carriers of S. aureus ; 11 patients have an ISO (or an incidence rate of 2.88%) ; 5 patients have an ISO S. aureus (an incidence of S. aureus ISO 1.3%). The introduction of the screening process, allowed a drop of 5.92% ISO rate at 1.46% with a passage of S. aureus SSI rates of 3, 60% to 0.72%. In the near future, studies are needed to confirm these encouraging results, to demonstrate the efficacy of preoperative decontamination in carriers of S. aureus patients before laying prosthesis