Fermentation kinetics including product and substrate inhibitions plus biomass death: a mathematical analysis

Fermentation is generally modelled by kinetic equations giving the time evolutions for biomass, substrate, and product concentrations. Although these equations can be solved analytically in simple cases if substrate/product inhibition and biomass death are included, they are typically solved numerically. We propose an analytical treatment of the kinetic equations --including cell death and an arbitrary number of inhibitions-- in which constant yield needs not be assumed. Equations are solved in phase space, i.e. the biomass concentration is written explicitly as a function of the substrate concentration.Comment: 4 pages, 4 figure

Evidence of hydrothermal fluid circulation driving elemental mass redistribution in an active fault zone

Important fault zone processes can be discerned from the characterization of fracture damage and chemical transformations associated with active seismic sources. To characterize the 2010 M7.2 El Mayor-Cucapah rupture zone, continuous samples of fault core and 23 samples of damaged rock were collected perpendicular to strike of the Borrego fault. Samples were analyzed for clay mineralogy, bulk geochemistry, and bulk and grain density from which porosities and volumetric strains were derived. Prior to the Borrego fault forming, the tonalitic protolith, containing chlorite, epidote, and titanite, was subjected to temperatures of ∼330–340 °C during deuteric alteration. Rocks within the damage zone are partially pulverized and contain abundant cataclastic seams. Porosity and volumetric strain peak in zones 1.5 m–10.5 m from the core. Within these zones, losses in Ca and P mass, increases in Mg and Na mass, along with the conservation of Fe and Si mass are consistent with oxidizing acidic conditions at < 200 °C. Gains in LOI are attributed to increases in clay content. The above data support a model of Mg- and Na-rich oxidizing fluid circulation within the damage zone of the Borrego fault

Aflatoxins and fumonisins contamination of home-made food (Weanimix) from cereal-legume blends for children

Background: Weanimix is an important food for children in Ghana. Mothers are trained to prepare homemade weanimix from beans, groundnuts and  maize for their infants. Groundnuts and maize are prone to aflatoxincontamination while fumonisin contaminates maize. Aflatoxin, is produced by the Asperguillus fungi while fumonisin, is produced by Fusarium fungi. These mycotoxins occur in tropical areas worldwide due to favorable climate for their growth.Objective: The objective of the study was to determine the levels of aflatoxin and fumonisin in homemade weanimix in the Ejura-Sekyedumase district in the Ashanti Region of Ghana.Methods: Thirty six homemade weanimix samples (50g each) were collected from households. Aflatoxin and fumonisin were measured using a fluorometric procedure described by the Association of Official AnalyticalChemist (AOAC official method 993.31, V1 series 4).Results: Aflatoxin and fumonisin were detected in all 36 samples, range 7.9-500ppb. Fumonisin levels range: 0.74-11.0ppm). Thirty (83.3%) of the thirty six samples were over the action limit of 20ppb for aflatoxin withan overall mean of 145.2 ppb whiles 58.3% of the samples had fumonisins above the action limit of 4 ppm with an overall mean of 4.7 ppm .Conclusion: There were significant aflatoxin and fumonisin contamination of homemade weanimix. Children fed on this nutritional food were being exposed to unacceptable levels of aflatoxin and fumonisin. Therefore there is a critical need to educate mothers on the dangers of mycotoxin exposure and to develop strategies to eliminate exposure of children fedhomemade weanimix to aflatoxin and fumonisin.Keywords: Aflatoxin, Fumonisin, Home-made Weanimix, infants

Detection of chromosome aberrations in the human interphase nucleus by visualization of specific target DNAs with radioactive and non-radioactive in situ hybridization techniques: diagnosis of trisomy 18 with probe L1.84

The localization of chromosome 18 in human interphase nuclei is demonstrated by use of radioactive and nonradioactive in situ hybridization techniques with a DNA clone designated L1.84. This clone represents a distinct subpopulation of the repetitive human alphoid DNA family, located in the centric region of chromosome 18. Under stringent hybridization conditions hybridization of L1.84 is restricted to chromosome 18 and reflects the number of these chromosomes present in the nuclei, namely, two in normal diploid human cells and three in nuclei from cells with trisomy 18. Under conditions of low stringency, cross-hybridization with other subpopulations of the alphoid DNA family occurs in the centromeric regions of the whole chromosome complement, and numerous hybridization sites are detected over interphase nuclei. Detection of chromosome-specific target DNAs by non-radioactive in situ hybridization with appropriate DNA probes cloned from individual chromosomal subregions presents a rapid means of identifying directly numerical or even structural chromosome aberrations in the interphase nucleus. Present limitations and future applications of interphase cytogenetics are discussed

Systematic review of sensory processing in preterm children reveals abnormal sensory modulation, somatosensory processing and sensory-based motor processing

Aim Preterm birth poses concerns in daily functioning and behaviour in childhood, possibly connected to sensory processing disorder. This review aimed to systematically identify assessments, incidence and nature of sensory processing disorder in preterm-born infants and children. Methods We searched literature through CINAHL-EBSCOhost, Cochrane, Ovid/PsychINFO, PubMed/Medline, Scopus and Google Scholar, published until November 2018. We included electronically available, peer-reviewed studies of preterm-born children that applied standardised sensory processing assessments. We excluded studies of preterm-born children with major neurodevelopmental impairments. Results We identified 27 studies of premature children, aged from birth to 9 years 7 months. The assessments represented three versions of Sensory Profile questionnaires and three clinical tests, Test of Sensory Functions in Infants, the Miller Assessment for Preschoolers, and the Sensory Integration and Praxis Test. The studies revealed wide variation of atypical sensory processing: 28%-87% in sensory modulation, 9%-70% in somatosensory processing and 20%-70% in sensory-based motor processing. Conclusion Preterm-born children exhibited elevated risk for sensory processing disorder from infancy into school age. Routine screening of sensory processing, intervention intervals and parental consultations should be considered in ameliorating sensory processing and neurocognitive development. Moreover, a larger body of intervention studies is needed.Peer reviewe

Using animal-mounted sensor technology and machine learning to predict time-to-calving in beef and dairy cows

Worldwide, there is a trend towards increased herd sizes, and the animal-to-stockman ratio is increasing within the beef and dairy sectors; thus, the time available to monitoring individual animals is reducing. The behaviour of cows is known to change in the hours prior to parturition, for example, less time ruminating and eating and increased activity level and tail-raise events. These behaviours can be monitored non-invasively using animal-mounted sensors. Thus, behavioural traits are ideal variables for the prediction of calving. This study explored the potential of two sensor technologies for their capabilities in predicting when calf expulsion should be expected. Two trials were conducted at separate locations: (i) beef cows (n = 144) and (ii) dairy cows (n = 110). Two sensors were deployed on each cow: (1) Afimilk Silent Herdsman (SHM) collars monitoring time spent ruminating (RUM), eating (EAT) and the relative activity level (ACT) of the cow, and (2) tail-mounted Axivity accelerometers to detect tail-raise events (TAIL). The exact time the calf was expelled from the cow was determined by viewing closed-circuit television camera footage. Machine learning random forest algorithms were developed to predict when calf expulsion should be expected using single-sensor variables and by integrating multiple-sensor data-streams. The performance of the models was tested using the Matthew’s correlation coefficient (MCC), the area under the curve, and the sensitivity and specificity of predictions. The TAIL model was slightly better at predicting calving within a 5-h window for beef cows (MCC = 0.31) than for dairy cows (MCC = 0.29). The TAIL + RUM + EAT models were equally as good at predicting calving within a 5-h window for beef and dairy cows (MCC = 0.32 for both models). Combining data-streams from SHM and tail sensors did not substantially improve model performance over tail sensors alone; therefore, hour-by-hour algorithms for the prediction of time of calf expulsion were developed using tail sensor data. Optimal classification occurred at 2 h prior to calving for both beef (MCC = 0.29) and dairy cows (MCC = 0.25). This study showed that tail sensors alone are adequate for the prediction of parturition and that the optimal time for prediction is 2 h before expulsion of the calf

Plankton community respiration and bacterial metabolism in a North Atlantic Shelf Sea during spring bloom development (April 2015)

Spring phytoplankton blooms are important events in Shelf Sea pelagic systems as the increase in carbon production results in increased food availability for higher trophic levels and the export of carbon to deeper waters and the sea-floor. It is usually accepted that the increase in phytoplankton abundance and production is followed by an increase in plankton respiration. However, this expectation is derived from field studies with a low temporal sampling resolution (5–15 days). In this study we have measured the time course of plankton abundance, gross primary production, plankton community respiration, respiration of the plankton size classes (> 0.8 μm and 0.2–0.8 μm) and bacterial production at ≤5 day intervals during April 2015 in order to examine the phasing of plankton autotrophic and heterotrophic processes. Euphotic depth-integrated plankton community respiration increased five-fold (from 22 ± 4 mmol O2m−2 d−1 on 4th April to 119 ± 4 mmol O2m−2 d−1 on 15th April) at the same time as gross primary production also increased five-fold, (from 114 ± 5 to 613 ± 28 mmol Cm−2 d−1). Bacterial production began to increase during the development of the bloom, but did not reach its maximum until 5 days after the peak in primary production and plankton respiration. The increase in plankton community respiration was driven by an increase in the respiration attributable to the> 0.8 μm size fraction of the plankton community (which would include phytoplankton, microzooplankton and particle attached bacteria). Euphotic depth-integrated respiration of the 0.2–0.8 μm size fraction (predominantly free living bacteria) decreased and then remained relatively constant (16 ± 3 – 11 ± 1 mmol O2m−2 d−1) between the first day of sampling (4th April) and the days following the peak in chlorophyll-a (20th and 25th April). Recent locally synthesized organic carbon was more than sufficient to fulfil the bacterial carbon requirement in the euphotic zone during this productive period. Changes in bacterial growth efficiencies (BGE, the ratio of bacterial production to bacterial carbon demand) were driven by changes in bacterial production rates increasing from<30 ± 14% on 4th April to 51 ± 11% on 25th of April. This study therefore shows a concurrent rather than a phased increase in primary production and community respiration attributable to cells>0.8 μm during the development of the spring bloom, followed 5 days later by a peak in bacterial production. In addition, the size fractionated respiration rates and high growth efficiencies suggest that free living bacteria are not the major producers of CO2 before, during and a few days after this shelf sea spring phytoplankton bloom

MRI-guided adaptive radiotherapy for prostate cancer: When do we need to account for intra-fraction motion?

A shift of the daily plan can mitigate target position changes that occur between daily MR acquisition and treatment for MR-linac radiotherapy, but increases the session time. We demonstrated that our workflow strategy and decision-making process, to determine whether a subsequent shift is necessary, is appropriate